Rosina – Rosetta Orbiter Spectrometer for Ion and Neutral Analysis

The Rosetta Orbiter Spectrometer for Ion and Neutral Analysis (ROSINA) will answer important questions posed by the mission’s main objectives. After Giotto, this will be the first time the volatile part of a comet will be analyzed in situ. This is a very important investigation, as comets, in contrast to meteorites, have maintained most of the volatiles of the solar nebula. To accomplish the very demanding objectives through all the different phases of the comet’s activity, ROSINA has unprecedented capabilities including very wide mass range (1 to >300 amu), very high mass resolution (m/Δ m > 3000, i.e. the ability to resolve CO from N₂ and ¹³C from ¹²CH), very wide dynamic range and high sensitivity, as well as the ability to determine cometary gas velocities, and temperature. ROSINA consists of two mass spectrometers for neutrals and primary ions with complementary capabilities and a pressure sensor. To ensure that absolute gas densities can be determined, each mass spectrometer carries a reservoir of a calibrated gas mixture allowing in-flight calibration. Furthermore, identical flight-spares of all three sensors will serve for detailed analysis of all relevant parameters, in particular the sensitivities for complex organic molecules and their fragmentation patterns in our electron bombardment ion sources.     

适合航空航天用SiCp/Al复合材料的性能

采用粉末冶金法制备了Φ300 mm的15%(体积分数)SiCp/A l复合材料坯锭,研究了热挤压、锻造后的材料力学性能以及断裂特点。结果表明,该材料的弹性模量在97 GPa、拉伸强度保持在550 MPa的水平下,延伸率仍高达7%左右,旋转弯曲疲劳强度在250~290 MPa范围内,断裂韧性为25 MPa.m1/2,冲击韧性为62.5 kJ/m2。与棒材挤压态相比,T4态复合材料拉伸强度和屈服强度分别提高66.7%和100%,但塑性保持在同一水平。断口观察表明,挤压态复合材料以基体韧性断裂为主要形式,而T4态复合材料除了基体韧性断裂外,还存在SiC颗粒断裂现象。挤压棒材锻造后有利于提高材料的横向强度。     

European small geostationary communications satellites

Hispasat Advanced Generation 1 (HAG1) is the first satellite using the SGEO platform, which is under the development in the ESA Artes-11 program. Since the last presentation in the IAC 2007, a European industrial consortium led by OHB has completed the mission and spacecraft design. The platform Preliminary Design Review has been carried out in May 2008. The customer for the first mission is a commercial operator—Hispasat. The contract was signed in December 2008 and the satellite will be launched in 2012. To give confidence to the customer, SGEO platform will use up to date flight proven technologies. HAG1 carries 20/24 Ku-band and 3/5 Ka-band transponders to provide commercial services. Some innovative payload technologies will also be flown on board of HAG1 to gain in-orbit heritage. SGEO has also been selected as the baseline platform for the ESA Data Relay Satellite (EDRS). Phase-A study has just kicked off in January 2009. The targeted launch date is 2013. Heinrich Hertz will also use the SGEO platform. Heinrich Hertz is funded by the German Space Agency (DLR) and provides flight opportunities for technologies and components developed by the German Space Industry. With the HAG1 contract in hand, and EDRS and Heinrich Hertz in the line, OHB with its partners has the confidence that it will be able to speed up the product development of the SGEO platform for potential customers in the commercial market. This paper will first present the updated platform design and the status of the product development will be followed with the introduction of innovative payload technologies on board the first mission—HAG1 and ended with the mission concepts of EDRS and Heinrich Hertz missions.     

Principles for pioneers

The US National Commission on Space has recently issued its report, Pioneering the Space Frontier. As the US Founding Fathers laid down the basic principles which are the foundation of US society, the Commission has articulated certain basic principles which reflect the fundamental values of the American people. These principles lay the basis for the Commission's vision of space exploration and settlement and its benefits for the USA and all of humankind.     

EXOSAT observations of the iron line emission of Her X-l during a 35 day cycle

In March/April 1984 eleven EXOSAT observations of Her X-1 were performed sampling a full 35 day cycle. Spectral analysis of the ME and GSPC data shows that the iron line emission is present during all phases. During the main-on state we see an iron line at 6.65 ± 0.07 keV with a FWHM of 1–2 keV and an equivalent width of 300 to 400 eV. The high resolution GSPC data indicate that the line profiles have external wings and are not simple Gaussian. We report for the first time on the detection of an iron line during the intermediate-on state with about the same parameters as the main-on state line but an equivalent width a factor of 2 larger. During the off state between main-on and intermediate-on we detected a broad iron line feature at about 6.0 keV with an equivalent width of 2 keV. We discuss the Alfven region and a hot corona at the inner region of the accretion disk as the possible sites of the line production.     

Book reviews

Space Science Reviews -     

L10-TiAl金属间化合物Mn,Nb合金化电子结构的计算

采用第一原理赝势平面波方法计算了L10型TiAl金属间化合物中掺入Mn,Nb后的电子结构和价键结构.通过合金原子形成热得出Mn优先占据Al点阵位置,Nb优先占据Ti点阵位置.Mulliken聚居数分析发现Mn或Nb合金化后,分别降低了(001)和(002)面内的原子间键合强度,掺入Nb还降低了层间的原子间键合强度,而掺入Mn,则使层间原子间键合强度增加.整体上来讲,掺入Mn有利于改善TiAl的室温脆性,而掺入Nb,不利于改善TiAl的室温脆性.     

The Galactic Environment of the Sun: Interstellar Material Inside and Outside of the Heliosphere

Interstellar material (ISMa) is observed both inside and outside of the heliosphere. Relating these diverse sets of ISMa data provides a richer understanding of both the interstellar medium and the heliosphere. The galactic environment of the Sun is dominated by warm, low-density, partially ionized interstellar material consisting of atoms and dust grains. The properties of the heliosphere are dependent on the pressure, composition, radiation field, ionization, and magnetic field of ambient ISMa. The very low-density interior of the Local Bubble, combined with an expanding superbubble shell associated with star formation in the Scorpius-Centaurus Association, dominate the properties of the local interstellar medium (LISM). Once the heliosphere boundaries and interaction mechanisms are understood, interstellar gas, dust, pickup ions, and anomalous cosmic rays inside of the heliosphere can be directly compared to ISMa outside of the heliosphere. Our understanding of ISMa at the Sun is further enriched when the circumheliospheric interstellar material is compared to observations of other nearby ISMa and the overall context of our galactic environment. The IBEX mission will map the interaction region between the heliosphere and ISMa, and improve the accuracy of comparisons between ISMa inside and outside the heliosphere.     

B2-NiAl弹性性质Ag合金化效应的理论研究

采用第一原理赝势平面波方法和基于虚拟晶体势函数近似(VCA),计算了Ag合金化(浓度x＜1.0%,原子分数,下同)时完整与缺陷B2-NiAl晶体的弹性性质,并采用弹性常数C44,Cauchy压力参数(C12-C44)、弹性模量E、剪切模量G及其与体模量B0的比值G/B0等,表征和评判了Ag合金化浓度x对NiAl金属间化...