辐射发射参考源在EMC比对中的应用

辐射发射参考源是在对EMC测试系统进行比对测试和定期场地校验时必不可少的设备,介绍了辐射发射参考源的原理和特点、各种实现方式、国内外应用概况及其稳定性考核措施。     

基于改进FCM的北斗三频组合观测值选取

以北斗卫星导航系统三频双差为基础探讨了组合观测值及误差,针对以往采用聚类方法在研究GPS三频组合数据过程中的不足,提出了基于距离修正的增量模糊C均值算法.通过调节因子有效地修正了样本中心与聚类中心的距离,获得合理的隶属度,从而得到正确的分类;构造了基于距离修正的聚类有效性指标,自动获取最佳聚类数,避免了人为确定聚类数的不合理性;在此基础上引入增量的思想,数据增加时以原有的数据集为基础,根据阈值进行归类,不需要重新进行初始计算.通过矩阵变换法及实例验证了该方法的可行性和可靠性.     

一种新型恒温—温补晶体振荡器

提出了一种ＯＣＸＯ的恒温控制方法。该方法是利用乙醇的沸点制成换态式恒温箱。这种温度控制方法既可以用作中准确度的ＯＣＸＯ，又可以作为精密双层控温ＯＣＸＯ的外层恒温装置，还可以与简单的温补线路结合，构成高准确度的ＯＴＣＸＯ。     

Very low frequency interferometry for the Chang’E-2 project

Very low frequency interferometry among two astronomical experiments has been proposed and accepted for further study for the second phase of China’s lunar exploration programme (the Chang’E Programme), which is envisaged to operate a lander and a rover on the surface of the moon. This experiment is an interferometer experiment in the very low frequency (VLF, f < 15 MHz) regime of radio frequencies with at least degree-level angular resolution. The goals include observing solar storm activities, Coronal Mass Ejections, Auroral Kilometric Radiation, and planetary radiation in the solar system, studying the origin of Cosmic Rays, spectral properties of pulsars, surveying ionized hydrogen in the Galaxy, and exploring coherent radio emissions.     

TOPSAR data focusing based on azimuth scaling preprocessing

Both Doppler spectral aliasing and azimuth output time folding simultaneously exist in TOPSAR (Terrain Observation by Progressive Scans) raw data. Resampling in both Doppler frequency and azimuth time domain can resolve the azimuth aliasing problem but with the seriously increased computational complexity and memory consumption. According to the special characteristics of TOPSAR raw data support in the slow time/frequency domain (TFD), the presented azimuth scaling preprocessing step is introduced to not only resolve the Doppler spectral aliasing problem but also reduce the increased azimuth samples. Furthermore, the correction of sawtoothed azimuth antenna pattern (AAP) becomes easy to be implemented. The following conventional stripmap processor can be adopted to focus the residual TOPSAR raw data but with the result of azimuth aliased TOPSAR image. The mosaic approach, which has been presented to unfold azimuth aliased ScanSAR image, is exploited to resolve the problem of azimuth output folding in TOPSAR mode. Simulation results and pulse response parameters are given to validate the presented imaging approach.     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

小型BVA 石英谐振器的研制

传统的BVA石英谐振器在老化率和Q值方面具有优良的性能,但其体积大,抗振可靠性较差,限制了其推广和应用。本文介绍了一种新结构的BVA石英谐振器,通过优化电容片和石英晶片的结构设计,研制出更小尺寸的异型石英晶片和电容片,整个小型BVA谐振器的尺寸减小到HC-40/U,性能指标与传统BVA石英谐振器相当,同时具有较高的抗振可靠性。     

气相色谱法定量分析氧气中气体杂质方法研究

为寻找一种能够有效检测氧气中微量气体杂质的方法,采用配有氢火焰离子化检测器的气相色谱仪分析氧气中的微量气体杂质,研究了分析氧气中CO、CO₂及C₂H₂等气体杂质的操作参数,确定了氧气中微量气体杂质的分析方法,验证了该方法的可行性,该分析方法各组份分离效果良好,各种杂质组份定量精确度较高。     

一种改进的多点融合非均匀校正技术

针对空间宽幅相机在进行非均匀性校正过程中相机镜头与积分球输出口的相对位置发生变换后非均匀性校正精度下降的原因进行了分析,提出了一种改进的融合多点位置的非均匀校正新方法,即为了消除积分球的角均匀性和面均匀性的不足,采用获取多个位置的大量定标图像,融合求取平均值的方法得到校正系数来削弱这种影响,并进行试验验证分析。结果表明,多点融合的校正方法在积分球输出口光强不均匀、又无法固定相机与积分球相对位置的前提下,减少了积分球光强的不均匀性对系数可靠性的影响,相对辐射定标的非均匀校正精度得到大幅提高。     

提高数字器件频率稳定度测量分辨率的研究

提出了一种利用信号时空关系测量相位差来修正差拍周期的方法,并通过实验证明了该方法的正确性和可行性。此方法在提高数字器件频率稳定度测量分辨率方面还有很大的空间,是一种很有潜力的高精度测量技术。