Wire electrochemical machining with axial electrolyte flushing for titanium alloy

Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabrication of titanium and titanium alloys. Wire electrochemical machining (WECM) is mainly used for workpiece cutting under the condition of different thickness plates. It has a great advantage over wire electro-discharge machining, which is the absence of heat-affected zone around the cutting area. Moreover, the wire electrode in WECM could be used repetitively because it is not worn out. Thus, much attention has been paid to WECM. The effective way of removing electrolysis products is of importance to WECM. In this paper, the axial electrolyte flushing is presented to WECM for removing electrolysis products and renewing electrolyte. The Taguchi experiment is conducted to optimize the machining parameters, such as wire feedrate, machining voltage, electrolyte concentration, etc. Experimental results show that WECM with axial electrolyte flushing is a promising issue in the fabrication of titanium alloy (TC1). The feasibility of multi-wire electrochemical machining is also demonstrated to improve the machining productivity of WECM.     

NMOHEMS探头模型的制作及实验方法研究

NMOHEMS探头设计的有效性及其运动的CFD仿真计算方法都需要实验进行检验,利用计算机辅助设计结合三维快速成型技术制作了探头模型,在实验室水箱和水库两种环境下设计并完成了模型实验。其中,水箱实验利用有限实验水深,精确调整探头质量,利用高速摄像和图像处理技术,对多个较小质量探头的下沉运动进行了精密测量,详细的误差分析和修正后,获得不同质量探头运动的下落曲线和极限速度,以调整CFD仿真计算方法;水库实验利用自主研制的实验装置,对较大质量探头的下沉运动进行测量,误差修正后的极限速度为1．923m／s,验证了探头设计的有效性。     

碳纤维-微晶复合材料反射镜光学加工实验

采用环抛方法对有预埋件和无预埋件的两块碳纤维-微晶复合材料反射镜进行光学加工,之后进行了稳定性实验研究,采用Zygo干涉仪实测了碳纤维-微晶复合材料反射镜面形.稳定实验后,有预埋件反射镜面形P-V值为3.013λ,RMS值为0.669λ;无预埋件反射镜面形P-V值为2.313λ,RMS值为0.276λ(λ=632.8 nm).实验结果证明,有预埋件的碳纤维-微晶复合材料反射镜结构优于无预埋件结构,为碳纤维-微晶复合材料反射镜的工程化提供参考.     

固体运载火箭抗强电磁脉冲优化设计方法

本文分析了火箭在飞行过程中的强电磁脉冲(EMP)环境，建立了箭上敏感设备受强电磁脉冲干扰的优化设计模型，包括传导干扰及辐射干扰两种设计模型。针对起飞质量对火箭总体参数设计的制约问题，以最小质量增量为目标函数，采用模拟退火(SA)算法，对箭上典型电气系统抗强电磁脉冲防护进行优化设计研究，为箭上敏感设备抗强电磁脉冲指标与质量增量提供了平衡选取方法。优化结果表明,火箭在飞行过程中典型电气系统的抗强电磁脉冲性能指标达到要求的同时，实现了火箭质量增量最小的目标。     

常闭式电磁制动器驱动结构设计及性能分析

针对常闭式电磁制动器耗能高、制动力密度小、励磁线圈发热严重等缺点，尝试将永磁体引入至制动器驱动结构中，设计出了一种电磁与永磁混合作用的新型电永磁驱动结构。结合有限元软件，采用有限元法分析了其内部磁通量分布并研究励磁线圈电流、气隙及永磁体结构形状等因素对电磁力的影响。结果表明，电磁与永磁两磁场耦合性较好，电磁吸力随电流增加及气隙的减小增幅较大，且同等条件下L形永磁体的电磁驱动结构对衔铁的吸力最大，对电磁制动器轻量化研究具有指导意义。     

Performance verification of Lunar Regolith Penetrating Array Radar of Chang’E-5 mission

Lunar Regolith Penetrating Array Radar (LRPR) is one main payload of the Lander for Chinese Chang’E-5 (CE-5) mission. It is used to support the drilling and sampling device and to detect lunar regolith thickness and structure of the landing site. LRPR will only work in situ under static status, so the antenna array is employed. Since the antenna array is about 90?cm high from the ground, the layout is irregular, and the metal structure of the lander seriously interferes with LRPR, these factors make it very difficult to reconstruct the image of the drilling area, so the performance verification must be carried out. We propose a set of methods to process LRPR’s data and reconstruct image. The verification experiments demonstrate that these methods are suitable for LRPR, the thickness and structure of the lunar regolith from zero to two meters can be clearly mapped, the vertical resolution is a few centimeters, and the electromagnetic properties of the subsurface can be estimated. Therefore, the performance of LRPR meets the requirements, and LRPR can successfully support drilling and sampling.     

北京平原地区VS30估算模型适用性研究

本文使用基于钻孔测井数据的3类模型,即常速度外推模型、速度梯度模型、双深度参数外推模型,通过对北京地区460个深度超过30m的钻孔剪切波速资料进行分析,详细探究了V_(S30)估算模型在本研究区的适用性。研究结果表明双深度参数外推模型在估算V_(S30)上准确度很高,其不需要大量的数据进行回归分析,且不具有区域独立性,可以为全球包括北京地区场地类别划分提供依据,进而在震害快速评估中用于确定场地影响,是一种值得推广的估算模型。     

Simultaneous observations of spread F irregularities over Southeast Asia longitude using Sanya VHF radar,GPS and C/NOFS

Through concurrently measurements by Communication/Navigation Outage Forecasting System (C/NOFS), Sanya VHF radar and GPS ionospheric scintillation receiver on 12 March 2010, five plasma bubbles were found and three of them were observed by all those instruments. Two well-developed plumes with strong backscatter echoes were measured by Sanya radar and their corresponding depletions were observed by C/NOFS in Orbit 10317, 10318 and 10319. Broad plasma depletions resulting from merging process were found in orbit of 10318. The occurrence time and geophysical positions of scintillations correlate well with observations implemented by Sanya VHF radar and C/NOFS. Observations from three types of instrument indicate that the spread F irregularities have distinct scale. There were longitudinal differences between Sanya VHF radar and C/NOFS as irregularities measured, and the eastward drift of developed bubbles are responsible for these differences.     

大型或复杂构形辐射等效热平衡试验方法

对于大型或复杂构形不能参加的不完整状态热平衡试验,提出并证明了使试验等效完整状态的必要条件,即补偿两种状态下参试部位吸收的辐射热流之差。为验证这种等效方法的充分性,利用两种热分析软件对一个构造算例的多种状态进行了数值试验,结果表明方法可行。