Monotonicity-Preserving激波捕捉格式在湍流大尺度模拟中的评估

对高阶激波捕捉格式的性能进行了系统的测评,重点分析了Suresh和Huynh(1997)所提出的Monotonicity-Preserving格式的性能.结果表明Monotonicity-Preserving格式的性能显著优于原始WENO(Weighted Essentially Non-Oscillatory) 格式,和改进型WENO格式相当.对格式的分析进一步表明,迎风型的激波捕捉格式在湍流模拟方面的性能都不及高阶中心格式,其原因归结为激波捕捉格式所包含的线性和非线性耗散.因此,改进高阶激波捕捉格式的关键在于同时降低格式的线性耗散和非线性耗散,以提高格式对湍流脉动能量的保持和对小尺度脉动结构的捕捉能力.     

复合材料热膨胀性能的细观分析模型与预报

基于细观力学有限元方法对T300/5208,P75/934,P75/CE339,C6000/PMR 15,HMS/Borosilicate,P100/2024 Al六种复合材料的纵向和横向热膨胀系数进行了预报,并将预报结果与国内外常用的几种理论方法的预报结果以及试验值进行了对比,分析了各分析方法的预报精度.各分析方法对于复合材料的纵向热膨胀系数的预报结果与试验值均能很好吻合;对于横向热膨胀系数,各分析方法的预报结果相差较大.Rosen and Hashin(RH)方法与所建立的细观力学有限元分析模型的预报结果与试验值的吻合程度比其他理论方法要高,进而验证了细观力学有限元方法的可靠性.此外,基于细观力学有限元方法建立了各种材料体系热膨胀系数对纤维体积分数的响应关系,得出复合材料纤维/基体性能比对其热膨胀系数的影响,为航空航天结构先进复合材料的应用提供了技术基础支撑.     

CFD predictions of LBO limits for aero-engine combustors using fuel iterative approximation

Lean blow-out (LBO) is critical to operational performance of combustion systems in propulsion and power generation. Current predictive tools for LBO limits are based on decadesold empirical correlations that have limited applicability for modern combustor designs. According to the Lefebvre’s model for LBO and classical perfect stirred reactor (PSR) concept, a load parameter (LP) is proposed for LBO analysis of aero-engine combustors in this paper. The parameters contained in load parameter are all estimated from the non-reacting flow field of a combustor that is obtained by numerical simulation. Additionally, based on the load parameter, a method of fuel iterative approximation (FIA) is proposed to predict the LBO limit of the combustor. Compared with experimental data for 19 combustors, it is found that load parameter can represent the actual combustion load of the combustor near LBO and have good relativity with LBO fuel/air ratio (FAR). The LBO FAR obtained by FIA shows good agreement with experimental data, the maximum prediction uncertainty of FIA is about ±17.5%. Because only the non-reacting flow is simulated, the time cost of the LBO limit prediction using FIA is relatively low (about 6 h for one combustor with computer equipment of CPU 2.66 GHz · 4 and 4 GB memory), showing that FIA is reliable and efficient to be used for practical applications.     

诚信建设的系统工程

诚信已成为一个涉及方方面面的社会系统工程,其建设可通过多级（递阶）控制和分解协调法,采用政府推动与监督,市场规范运作,社会广泛参与的运行模式,从诚信系统各子系统的目标任务出发,建立信用政策法规体系、信用服务市场体系、信用监管与奖惩体系和信用文化体系,从而推进全社会诚信系统工程建设。     

Elliptical formation control based on relative orbit elements

A new set of relative orbit elements（ROEs）is used to derive a new elliptical formation flying model.In-plane and out-of-plane motions can be completely decoupled,which benefts elliptical formation design.The inverse transformation of the state transition matrix is derived to study the relative orbit control strategy.Impulsive feedback control laws are developed for both in-plane and out-of-plane relative motions.Control of in-plane and out-of-plane relative motions can be completely decoupled using the ROE-based feedback control law.A tangential impulsive control method is proposed to study the relationship of fuel consumption and maneuvering positions.An optimal analytical along-track impulsive control strategy is then derived.Different typical orbit maneuvers,including formation establishment,reconfguration,long-distance maneuvers,and formation keeping,are taken as examples to demonstrate the performance of the proposed control laws.The effects of relative measurement errors are also considered to validate the high accuracy of the proposed control method.     

基于高度控制的拖靶定高飞行分析

超低空飞行的航空拖靶需要高精度的高度控制,而作为试验和训练的消耗性装备,其低成本设计要求使得航空拖靶不能采用常规飞行器的高度控制方法。针对以拖曳力为飞行动力的航空拖靶,研究其基于非姿态控制的定高飞行的运动特性。定高飞行航空拖靶采用高稳定性的气动布局,并基于准直接力控制的升降舵面进行高度调整操纵。通过建立拖靶的纵向运动数学模型,设计非姿态控制定高飞行控制方法,详细分析拖靶气动特性,并进行定高飞行控制的仿真计算。计算结果给出拖靶的高度控制能力及飞行状态,结果表明拖靶具有一定的高度调整能力,可以实现定高飞行。     

High-temperature tribological behaviors of a Cr-Si co-alloyed layer on TA15 alloy

A Cr-Si co-alloyed layer was successfully deposited on TA15 alloy by the double glow plasma surface technology to improve its poor wear resistance at elevated temperature.The microstructure,composition,and phase structure of the layer were investigated by SEM,EDS,and XRD.The tribological behaviors of the Cr-Si co-alloyed layer at 20 ℃ and 500 ℃ were analyzed in details.The results indicated that the friction coefficient and wear rate of the Cr-Si coalloyed layer at 20 ℃ and 500 ℃ were much lower than those of the substrate,which was due to higher hardness and superior elastic modulus.This layer may become an approach to effectively improving the wear resistance of TA15 alloy at elevated temperature.     

Performance simulation of high altitude scientific balloons

The design and operation of a high altitude scientific balloon requires adequate knowledge of the thermal characteristics of the balloon to make it safe and reliable. The thermal models and dynamic models of altitude scientific balloons are established in this paper. Based on the models, a simulation program is developed. The thermal performances of a super pressure balloon are simulated. The influence of film radiation property and clouds on balloon thermal behaviors is discussed in detail. The results are helpful for the design and operate of safe and reliable high altitude scientific balloons.     

隐式Runge-Kutta方法在非定常化学非平衡流动中的应用

推导了求解NS方程组的隐式龙格-库塔方法,并从稳定性、精度和效率三方面展开讨论。通过定常和非定常算例对该方法进行验算,分析表明该方法计算结果正确、稳定性好、精度高、效率高,适合求解大型复杂非定常化学非平衡流动。     

Start-up current adaptive control for sensorless high-speed brushless DC motors based on inverse system method and internal mode controller

The start-up current control of the high-speed brushless DC (HS-BLDC) motor is a chal-lenging research topic. To effectively control the start-up current of the sensorless HS-BLDC motor, an adaptive control method is proposed based on the adaptive neural network (ANN) inverse system and the two degrees of freedom (2-DOF) internal model controller (IMC). The HS-BLDC motor is identified by the online least squares support vector machine (OLS-SVM) algo-rithm to regulate the ANN inverse controller parameters in real time. A pseudo linear system is developed by introducing the constructed real-time inverse system into the original HS-BLDC motor system. Based on the characteristics of the pseudo linear system, an extra closed-loop feed-back control strategy based on the 2-DOF IMC is proposed to improve the transient response per-formance and enhance the stability of the control system. The simulation and experimental results show that the proposed control method is effective and perfect start-up current tracking perfor-mance is achieved.