Onboard Pilot and Remote Copilot for Aviation Safety, Security & Cost Reduction

The 21^st Century Aviation System can reduce the cost of flying, while substantially increasing the safety and security of cargo and carrier aircraft with an onboard pilot/s and a remote copilot residing in a secure ground-based simulator.     

昆虫翅悬停飞行中的三维空间旋涡结构

昆虫(果蝇)悬停飞行中,翅膀按照特定的拍动方式往复运动,产生非定常高升力维持身体的平衡.研究昆虫高升力机理,需要探索拍动翼运动引发的三维空间非定常流场的特性,尤其是三维空间非定常涡的发展变化过程.本文将氢气泡流动显示技术应用于动态模型实验,定性的观察拍动翼前缘涡(LEV)的发展破裂过程.并利用数字体视粒子图像测速,DSPIV(Digital Steroscopic Particle Image Velocimetry)技术,测得了拍动翼运动瞬时相位和相位平均的三维空间流场信息(速度向量场、截面涡量场、空间涡量场,以及三维空间流线),揭示了拍动翼展向流动的存在,并结合定性和定量方法多角度说明了前缘涡沿展向发展到破裂的流动结构,并说明了侧缘涡与前缘涡的相互影响.测量结果表明:在雷诺数960的情况下,拍动翼运动至相位时,翼面上前缘涡在距翼根约60%展长的位置发生破裂;翼根至破裂点之间,展向流动稳定,指向翼梢;破裂点以后,展向流改变方向,指向翼根.     

Orbital phase spectroscopy of four high mass X-ray binary pulsars to study the stellar wind of the companion

Our work focuses on a comprehensive orbital phase-dependent spectroscopy of the four High Mass X-ray Binary Pulsars (HMXBPs) 4U 1538-52, GX 301-2, OAO 1657-415 and Vela X-1. We hereby report the measurements of the variation of the absorption column density and iron-line flux along with other spectral parameters over the binary orbit for the above-mentioned HMXBPs in elliptical orbits, as observed with the Rossi X-ray Timing Explorer (RXTE) and the BeppoSAX satellites. A spherically symmetric wind profile was used as a model to compare the observed column density variations. Out of the four pulsars, only in 4U 1538-52, we find the model having a reasonable corroboration with the observations, whereas in the remaining three the stellar wind seems to be clumpy and a smooth symmetric stellar wind model appears to be quite inadequate in explaining the data. Moreover, in GX 301-2, neither the presence of a disk nor a gas stream from the companion was validated. Furthermore, the spectral results obtained in the case of OAO 1657-415 and Vela X-1 were more or less similar to that of GX 301-2.     

M-ary sequential hypothesis tests for automatic targetrecognition

Several forms of sequential hypothesis testing algorithms are described and their performance as classification algorithms for automatic target recognition is evaluated and compared. Several forms of parameteric algorithms, as well as a sequential form of a useful nonparametric algorithm are considered. The primary focus is the design of algorithms for automatic target recognition that produce maximally reliable decisions while requiring, on the average, a minimum number of backscatter measurements. The tradeoffs between the average number of required measurements and the error performance of the resulting algorithms are compared by means of Monte-Carlo simulation studies     

太阳表面水平运动驱动的磁圈与开放磁场重联的模拟研究

太阳大气的诸多观测事件(如耀斑、喷流等)均被归因于磁重联产生的能量转换. 近年来, 关于太阳风起源, 有研究提出了磁重联使闭合磁圈开放为太阳风供应物质的新模式. 在该模式中, 闭合磁圈被光球超米粒组织对流携带, 向超米粒边界运动, 与位于边界的开放磁场相碰撞进而发生磁重联. 该模式中磁重联的驱动及其效应是本文的研究目标. 磁流体力学(MHD)数值模拟是研究太阳大气磁重联物理过程的重要途径. 本文建立了一个二维MHD数值模型, 结合太阳大气温度和密度的分层分布, 在超米粒组织尺度上模拟了水平流动驱动的闭合磁圈与开放磁场的重联过程. 通过对模拟结果的定量分析, 认为磁重联确实能够将闭合磁圈的物质释放, 进而供应给新的开放磁结构并产生向上流动. 该结果为进一步模拟研究太阳风初始外流奠定了基础.     

零件表面微观工艺特征性研究 ——产品(零件)工艺技术基础科学问题机理探索

通过研究产品(零件)制造过程、方法、参数等工艺因素,给零件表面及表层带来(留下)特有的微观特征性,首次在高精度惯性仪表和高可靠电磁继电器(机电类)产品制造体系中引入了零件表面微观工艺特征性概念,提出了制造阶段的产品工艺可靠性设计和微观工艺特征(性)分析方法,提出了该类产品制造中的工艺设计更应该关注零件与产品设计原理匹配性和性能特性符合性观点,提出零件制造要从单纯的控制几何精度向控制性能特性转变,从宏观、单一采标的几何参数评价向微观、综合采标的非几何(非尺寸)参数评价模式为主转变的建议.零件表面存在的这种微观特征现象与零件几何精度一样,将对产品制造的合格率、稳定性、可靠性的实现起到至关重要的作用,尤其对产品的合格率影响极大,有必要开展更深入、更系统的研究,以建立起我国自主的高端产品(或零件)制造基准工艺平台.     

The Soviet manned lunar programme and its legacy

In the last two years the USSR has not only acknowledged publicly for the first time that it was trying to ‘race’ the USA to put the first man on the Moon, but they have finally given some details of the programme, the equipment and the political in-fighting which ensured that the programme was a failure. This article traces the history of the Soviet manned lunar programme and also discusses the implications for the future development of the Soviet manned programme of the giant N-1 booster's cancellation in 1974.     

Power anomaly effects and costs in low-voltage mobile power systems

Electric power anomalies or disturbances can disrupt the normal operation of equipment, accelerate aging, or even cause outright failures thus resulting in increased costs of maintenance and reduced system reliability. Past research on the effects caused by power anomalies has been mostly focused on industrial, commercial, or residential systems, or on power distribution equipment. A literature survey reveals that there is no comprehensive review related to low-voltage (LV) power systems and utilization equipment applicable to military combat vehicles, such as aircraft and ships. This paper summarizes the results of a new literature survey that focused on the causes, effects, and mitigation methods for power anomalies typical of LV mobile power systems. Electric power anomaly cost data collected from the literature are also presented, from which the costs of anomalies to the national defense are estimated using some simple rationales.