Response of the EIA ionosphere to the 7-8 May 2005 geomagnetic storm

In this paper, response of low latitude ionosphere to a moderate geomagnetic storm of 7–8 May 2005 (SSC: 1920 UT on 7 May with Sym-H minimum, ∼−112 nT around 1600 UT on 8 May) has been investigated using the GPS measurements from a near EIA crest region, Rajkot (Geog. 22.29°N, 70.74°E, Geomag.14°), India. We found a decrease in total electron content (TEC) in 12 h after the onset of the storm, an increase during and after 6 h of Sym-H deep minimum with a decrease below its usual-day level on the second day during the recovery phase of the storm. On 8 May, an increase of TEC is observed after sunset and during post-midnight hours (maximum up to 170%) with the formation of ionospheric plasma bubbles followed by a nearly simultaneous onset of scintillations at L-band frequencies following the time of rapid decrease in Sym-H index (−30 nT/h around 1300 UT).     

An Automatic Data Processing System for Laser Anemometers

An automatic data processing system for the evaluation of statistically occurring Doppler-difference bursts is described. In addition to the higher accuracy compared with the data acquisition procedures known so far, this technique allows the Doppler-difference method to be used as an operational instrument for investigations into turbulent flows, especially in the case of low particle density and extremely small turbulence degrees.     

Incremental planning to control time-constrained blackboard-basedproblem solver [vehicle monitoring]

A planner that improves the control decisions made by a blackboard-based problem solver is described. This planner interleaves planning and execution. It sketches out major plan steps but incrementally details actions for only the next step since earlier actions influence how (and whether) to pursue a plan. The planner also reasons about time constraints, revising plans to meet problem-solving deadlines and deciding when it has done enough work on a problem. Implementation of these mechanisms is outlined, and experiments are discussed showing how they reduce overall computation and improve problem solving     

The relevant atomic data

The current status of the theoretical methods for producing the relevant atomic data is surveyed.Proceedings of the Conference Solar Physics from Space, held at at the Swiss Federal Institute of Technology Zurich (ETHZ), 11–14 November 1980.     

Development of 1000-mHz Distance Measuring Equipment

The major radio aids to air navigation are listed. Underlined are those whose signal format is standardized by the International Civil Aviation Organization (ICAO) and they have now all been the subject of the IEEE Aerospace and Electronic Systems Society Pioneer Award, as follows: airborne direction finder/nondirectional beacon (ADF/NDB), Busignies and Moseley, 1959; VHF omnidirectional range (VOR), Stuart, 1962; instrument landing system (ILS), Kramar 1964, Alford 1965; air traffic control radar beacon system (ATCRBS), Williams, Bowden, and Harris, 1973; distance measuring equipment (DME), Dodington, 1980. A brief history of the development of the distance measuring equipment, which also formed the basis for an IEEE National Aerospace Electronics Conference luncheon address, is given.     

Detection of satellite attitude sensor faults using the UKF

A novel fault detection (FD) method for nonlinear systems using the residuals generated by the unscented Kalman filter (UKF) is proposed. The errors of the UKF are derived and sufficient conditions for the convergence of the UKF are presented. As the local approach is a powerful statistical technique for detecting changes in the mean of a Gaussian process, it is used to devise a hypothesis test to detect faults from residuals obtained from the UKF. Further, it is demonstrated that the selection of a sample number is important in improving the performance of the local approach. To illustrate the implementation and performance of the proposed technique, it is applied to detect sensor faults in the measurement of satellite attitude.     

Near Infrared Spectrometer for the Near Earth Asteroid Rendezvous Mission

The Near-Infrared Spectrometer (NIS) instrument on the Near-Earth Asteroid Rendezvous (NEAR) spacecraft is designed to map spectral properties of the mission target, the S-type asteroid 433 Eros, at near-infrared wavelengths diagnostic of the composition of minerals forming S asteroids. NIS is a grating spectrometer, in which light is directed by a dichroic beam-splitter onto a 32-element Ge detector (center wavelengths, 816–1486 nm) and a 32-element InGaAs detector (center wavelengths, 1371–2708 nm). Each detector reports a 32-channel spectrum at 12-bit quantization. The field-of-view is selectable using slits with dimensions calibrated at 0.37° × 0.76° (narrow slit) and 0.74° × 0.76° (wide slit). A shutter can be closed for dark current measurements. For the Ge detector, there is an option to command a 10x boost in gain. A scan mirror rotates the field-of-view over a 140° range, and a diffuse gold radiance calibration target is viewable at the sunward edge of the field of regard. Spectra are measured once per second, and up to 16 can be summed onboard. Hyperspectral image cubes are built up by a combination of down-track spacecraft motion and cross-track scanning of the mirror. Instrument software allows execution of data acquisition macros, which include selection of the slit width, number of spectra to sum, gain, mirror scanning, and an option to interleave dark spectra with the shutter closed among asteroid observations. The instrument was extensively characterized by on-ground calibration, and a comprehensive program of in-flight calibration was begun shortly after launch. NIS observations of Eros will largely be coordinated with multicolor imaging from the Multispectral Imager (MSI). NIS will begin observing Eros during approach to the asteroid, and the instrument will map Eros at successively higher spatial resolutions as NEAR's orbit around Eros is lowered incrementally to 25 km altitude. Ultimate products of the investigation will include composition maps of the entire illuminated surface of Eros at spatial resolutions as high as 300 m.