基于Origin语言的某型教练机发动机燃油系统故障诊断与分析

某型教练机在低空大表速飞行时,其发动机在最大状态下的供油量超过了发动机在各个状态的最大燃油流量软件值（GT=2300kg／h）,发动机从主燃油流量控制转为发动机应急流燃油量控制。本文对发动机色行数据进行了深入分析,同时结合发动机的三大特性,对其控制系统软件进行更改,经过后续飞行验证．发动机燃油控制系统下作正常。     

Form-finding methods for deployable mesh reflector antennas

Deployable high-frequency mesh reflector antennas for future communications and obser- vations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surface accuracy are widely required. The form-finding analysis of deployable mesh reflector antennas becomes more vital which aims to determine the initial surface profile formed by the equilibrium prestress distribution in cables to satisfy the surface accuracy requirement. In this paper, two form-finding methods for mesh reflector antennas, both of which include two steps, are pro- posed. The first step is to investigate the prestress design only for the cable net structure as the circum- ferential nodes connected to the supporting truss are assumed fixed. The second step is to optimize the prestress distribution of the boundary cables connected directly to the supporting truss considering the elastic deformation of the antenna structure. Some numerical examples are carried out and the simulation results demonstrate the proposed form-finding methods can warrant the deformed antenna reflector surface matches the one by design and the cable tension forces fall in a specified range.     

Environmental stress level evaluation approach based on physical model and interval grey association degree

 Associating environmental stresses (ESs) with built-in test (BIT) output is an important means to help diagnose intermittent faults (IFs). Aiming at low efficiency in association of traditional time stress measurement device (TSMD), an association model is built. Thereafter, a novel approach is given to evaluate the integrated environmental stress (IES) level. Firstly, the selection principle and approach of main environmental stresses (MESs) and key characteristic parameters (KCPs) are presented based on fault mode, mechanism, and ESs analysis (FMMEA). Secondly, reference stress events (RSEs) are constructed by dividing IES into three stress levels according to its impact on faults; and then the association model between integrated environmental stress event (IESE) and BIT output is built. Thirdly, an interval grey association approach to evaluate IES level is proposed due to the interval number of IES value. Consequently, the association output can be obtained as well. Finally, a case study is presented to demonstrate the proposed approach. Results show the proposed model and approach are effective and feasible. This approach can be used to guide ESs measure, record, and association. It is well suited for on-line assistant diagnosis of faults, especially IFs.     

民用大涵道比涡扇发动机吸雨能力评估的方法研究

从发动机吸雨后性能改变的基本原理出发,建立了部件气动热力损失、机械损失和工质热力学通用模型,借鉴适航咨询通告初步定义了关键吸雨工况及水含量。基于商用性能分析软件,对一个大涵道比9的涡扇发动机各项性能的变化进行了计算与分析,提出了一种定量描述发动机吸雨能力的评估方法。     

通用计量器具在军工企业中的应用与管理

通过对通用计量器具在军工企业中基础性应用与管理的探讨,分析流通应用中存在的问题以及应用环节需求、计量器具维护管理、通用工作量规自控管理等事项,总结出通用计量器具的配置原则,达到提升军工企业人员的计量测试能力,提高军工企业产品合格率和生产工作效率的目的。     

星载SAR椭圆轨道全零多普勒导引方法研究

多普勒中心频率在星载合成孔径雷达（SAR）成像中,直接影响方位向的模糊度及图像的定位精度。全零多普勒导引方法通过调整偏航角和俯仰角,使多普勒中心频率为零,但现有方法都导致残余多普勒中心频率较大。文章利用椭圆轨道下多普勒中心频率的表达式,将多普勒中心频率分为仅与俯仰角相关部分,以及与俯仰角和偏航角都相关的部分,令两部分分...     

TOPSAR data focusing based on azimuth scaling preprocessing

Both Doppler spectral aliasing and azimuth output time folding simultaneously exist in TOPSAR (Terrain Observation by Progressive Scans) raw data. Resampling in both Doppler frequency and azimuth time domain can resolve the azimuth aliasing problem but with the seriously increased computational complexity and memory consumption. According to the special characteristics of TOPSAR raw data support in the slow time/frequency domain (TFD), the presented azimuth scaling preprocessing step is introduced to not only resolve the Doppler spectral aliasing problem but also reduce the increased azimuth samples. Furthermore, the correction of sawtoothed azimuth antenna pattern (AAP) becomes easy to be implemented. The following conventional stripmap processor can be adopted to focus the residual TOPSAR raw data but with the result of azimuth aliased TOPSAR image. The mosaic approach, which has been presented to unfold azimuth aliased ScanSAR image, is exploited to resolve the problem of azimuth output folding in TOPSAR mode. Simulation results and pulse response parameters are given to validate the presented imaging approach.     

一个用于目标跟踪的改进粒子滤波算法

简化UT（unscented transformation）转化参数，修改UKF（unscented Kalmanfilter）提议分布，提出了改进的粒子滤波算法。调节因子的增加使得能在线自适应估计，滤波性能提高，并形成一个自适应的算法。仅有角测量的目标跟踪仿真试验证实了改进的粒子滤波算法要优于其它滤波方式。     

动力涡轮驱动的逆升压式空气循环制冷系统优化设计

基于典型飞行剖面分析计算,对目前电子设备吊舱所应用的各种环境控制系统进行了简要介绍,并分别分析了其优缺点.通过比较指出:动力涡轮驱动的逆升压式空气循环制冷系统是适用于电子设备吊舱冷却的有效方案之一.此系统在保证冷却涡轮处于设计工况的条件下,让部分冲压空气通过动力涡轮,因此,不会有非设计工况下冷却涡轮效率下降的问题,可以获得较大的制冷量.本文建立了该系统及各附件的数学模型,确定了系统设计计算方法,并分别以系统质量最小和性能系数最高为优化目标函数,提出了系统优化设计方法.     

基于有限元模型的飞行器柔性附件分散化滑模控制

研究分散化滑模控制在大型柔性附件振动控制领域中的应用。在设计控制系统时,滑模控制滑模面通过最小化最优价值函数得到,控制器采用饱和控制器。受控系统受到任意不可测量和不确定性外部扰动以及初始位移。分别利用分散化控制和集中控制方法对结构进行控制,仿真结果表明,当具有初始位移或受到不确定性外扰时,分散化控制非常有效。最后研究表明分散化控制方法所求解的Riccati方程数量远远少于集中控制方法,特别是大系统。