Estimation of ground range on the sweep frequency backscatter leading edge

The high frequency management system with backscatter radar supplies the real time ionosphere channel conditions to high frequency users, which leads to the demand for the ground range between the radar location and the scatters on the distant ground. The ionosphere electron density profile is usually inversed to obtain the ground range. An inversion algorithm, with which the ground range on the leading edge of the backscatter ionograms can be obtained without electron density, is presented in this paper. The ray path geometry of the backscatter sounding and the change in the group path on the leading edge with operating frequency are used to derive the ground range. Synthesized backscatter ionogram and experimental backscatter ionograms are processed to validate the algorithm. The results indicate that the algorithm is usable for high frequency management system.     

Structure and kinetic properties of slow-mode shocks associated with magnetic reconnection in the near-Earth magnetotail

We study the structure and kinetic properties of slow-mode shocks near the plasma sheet boundary layer (PSBL) associated with magnetic reconnection by Cluster observation. The presence of slow-mode shocks is confirmed by traditional Rankine–Hugoniot (RH) analysis and Monte-Carlo shock fitting method. The Walén analysis, applied to the tailward flow associated with slow-mode shocks, also supports that plasma was accelerated across a Petschek-type slow-mode shock connected to the diffusion region. Back-streaming ions were observed on the shock layer, and cold ions were accelerated and heated by slow-mode shocks. In addition, whistler and electrostatic solitary waves were observed around the slow-mode shocks. These waves might be excited by the observed field-aligned electron beams near the shocks.     

空间运输飞行器材料与制造技术需求分析

空间运输飞行器已经成为国际航天技术新的发展趋势,对材料和制造技术从两方面提出了新的需求:异形贮箱制造技术和热控材料与制造技术。本文对这两个问题进行了分析,结果表明:异形贮箱和热控硬件的材料与制造是制约空间运输飞行器发展的基础技术,必须在空间运输飞行器研制热潮之前先期突破。     

Effects of TADs on the F region of the mid-latitude ionosphere during an intense geomagnetic storm

Based on observations of two ionosondes at Wuhan and Kokubunji, this paper presents effects of TADs on the daytime mid-latitude ionosphere during the intense geomagnetic storm on March 31, 2001. During a positive ionospheric storm, the start of the enhancement of the foF2 (F2 peak plasma frequency) at Wuhan lags that at Kokubunji by 15 min, which corresponds to the time interval of traveling atmospheric disturbances (TADs’) propagation from Kokubunji to Wuhan. Associated with the uplifting of the hmF2 (height of F2 peak) caused by TADs, it is observed by the two ionosondes that the F1 cusp becomes better developed. Therefore, during a geomagnetic storm, TADs originating from the auroral oval may have a strong influence on the shape of the electron density profile in the F1 region ionosphere at middle latitudes. It is highly likely that TADs are responsible for the evolution of the F1 cusp.     

A discrete event systems approach to discriminating intermittent from permanent faults

Almost all work on model-based diagnosis （MBD） potentially presumes faults are per- sistent and does not take intermittent faults （IFs） into account. Therefore, it is common for diag- nosis systems to misjudge IFs as permanent faults （PFs）, which are the major cause of the problems of false alarms, cannot duplication and no fault found in aircraft avionics. To address this problem, a new fault model which includes PFs and IFs is presented based on discrete event systems （DESs）. Thereafter, an approach is given to discriminate between PFs and IFs by diagnosing the current fault. In this paper, the regulations of （PFs and IFs） fault evolution through fault and reset events along the traces of system are studied, and then label propagation function is modified to account for PFs and the dynamic behavior of IFs and diagnosability of PFs and IFs are defined. Finally, illustrative examples are presented to demonstrate the proposed approach, and the analysis results show the fault types can be discriminated within bounded delay if the system is diagnosable.     

梯型螺纹量规在航天产品检测中的应用

介绍了梯形螺纹量规的的工艺性能,从外观、相互作用、螺距半角和中径的测量等方面分析了梯形螺纹量规检测技术,并对其应用规划加以阐述,以提升航天军工产品的工艺技术水平和使用可靠性。     

精密复杂零件的工艺设计过程分析

针对航天控制产品精密复杂零件的工艺难点,以该类零件的工艺设计过程为主线,分别论述了材料定额编制、工艺路线设计以及工序设计过程中的注意事项和工艺方案设计方法,并以实例进行了简要说明。     

发挥军用空管系统技术优势努力推进民用空管系统的国产化

随着全球经济发展的发展,航空运输业也进入了高速发展期,显示出巨大的增长空间。为适应航空运输业的新形势,我国民航实行了体制改革,初步实现了政企分开,形成了有利于竞争的市场机制,国内外民航企业可以在平等条件下进行自由竞争。国务院2002年提出了民航体制改革的各项任务,历     

天线雷达散射截面的分析与实验

本文利用天线散射的基本原理，以波导激励振子抛物面天线为例，计算并分析了天线的结构项散射雷达截面ＲＣＳｓ和模式项散射雷达截面ＲＣＳｅ，给出了此天线雷达截面的预估值。实验结果表明，理论预估值与实测值吻合较好，并且证明天线的模项ＲＣＳｅ大于结构项ＲＣＳｓ，天线总的雷达截面主要受天线模式散射的影响，减小模式项ＲＣＳｅ将有效地降低天线的雷达截面。本文结果为探索以克服天线模式散射为主的天线ＲＣＳ减缩技术提供了理论依据     

运动油滴/固体壁面斜碰撞的状态辨识及特征分析

 航空发动机轴承腔油气两相流动与换热研究是轴承腔润滑与换热设计的重要基础工作,而运动油滴与轴承腔壁面的碰撞状态辨识及特征分析是轴承腔油气两相流动与换热研究的组成部分。基于VOF方法建立了运动油滴与固体壁面斜碰撞数值仿真模型,实现了运动油滴与固体壁面斜碰撞状态的数值模拟,分析了碰撞油滴直径、入射角和碰撞速度对沉积油膜铺展长度、油膜堆积厚度和溅射油滴数目等碰撞状态特征参数的影响规律,提出了运动油滴与固体壁面斜碰撞条件下的状态判断准则,并得到了文献的物理试验工作的支持。研究结果表明:随着油滴入射角减小,沉积油膜铺展长度和油膜堆积厚度增大,溅射油滴数目减少;随着碰撞速度和油滴直径的增大,沉积油膜铺展长度和溅射油滴数目均增大,但油膜堆积厚度对应前者呈减小趋势、对应后者仍呈增大趋势。