固体火箭发动机性能蜕变的压强补偿

介绍了采用缩小喷管喉径的方法，对固体火箭发动机燃烧室压强和推力进行补偿，以达到延长发动机使用寿命的目的。     

钛合金表面镍包石墨喷涂层的耐磨性能

为了提高钛合金的表面耐磨性,利用氧乙炔热喷涂枪,在TC4合金表面上制备出镍包石墨涂层。采用MXP-2000型销盘式摩擦磨损实验机,进行钛合金及其镍包石墨涂层的干摩擦磨损实验,并利用扫描电镜对磨损表面进行观察和分析。实验结果发现,镍包石墨涂层的摩擦系数只有钛合金的一半左右,前者磨损量为后者的1/6,说明镍包石墨涂层可以大大提高钛合金的表面耐磨性能。TC4合金的磨损机制以黏着磨损为主,喷涂层的磨损机制以磨粒磨损为主,喷涂层中的石墨润滑相是其耐磨性高的主要原因。     

反射面天线的双站雷达截面

 本文导出了任意旋转反射器天线在任意双站角的散射场和雷达截面(RCS),其中反射场由几何光学法(GO)求得,绕射场则利用基于物理绕射理论(PTD)与等效线电流辐射积分公式导出的等效电磁流法求得。分别计算了轴向入射和偏轴向入射时在任意散射方向上水平极化与垂直极化两种情况下的双站RCS,并给出了这些结果的立体图形式。方法简化为单站情况时的计算结果与实验值大致相符。     

高负荷跨音速复合气冷涡轮叶片的试验研究

在燃气涡轮研究所 ( GTE)的涡轮叶片综合冷却效果试验器上对四套大载荷跨音速复合式气冷涡轮叶片 (多种气膜孔方案 ) ,成功地进行了 2 90小时试验。试验结果表明 ,导叶在 2 - 8% ,动叶在 1- 6%宽广的冷气流量比范围内 ,具有良好的冷却特性。此外还分析了叶片参数对冷却效果的影响     

大展弦比直机翼双机身飞机中机身与机翼的最佳布置问题

为了探讨双机身大展弦比直机翼无人机中基于翼面弯曲刚度下机身与机翼的最佳布置问题,本文采用工程梁对这一问题进行建模,并利用MATLAB6．5的优化工具箱给出数值优化解。在此工作的基础上,研究了翼面扭转刚度,计算结果表明,与单机身布局相比,双机身布局中的翼面结构扭转刚度提高了4倍。结合文献[1]的工作,可以得出结论：就结构刚度(弯曲和扭转)而言,双机身布局具有一定的优势,值得做进一步的分析。     

空载固体发动机计算与试验模态相关性分析

为了预测空载状态固体火箭发动机动态特性,对其进行了模态试验,并应用MSC.Marc进行了模态计算,然后对比两者的结果,进行了相关性分析和评估。计算得到了发动机250Hz以内的一阶弯曲模态和五阶呼吸模态。试验测得了发动机的三阶呼吸模态和一阶弯曲模态。比较试验测试模态和与之对应的计算模态:固有频率相对误差均在5%以内;振型相关图上的点大都分布在斜率为1(或 1)的直线周围;MAC(模态置信判据)值在0 9左右。说明计算与试验模态有较好的相关性,有限元计算模型比较准确的反映了实际情况。     

An innovative study on low surface energy micronano coatings with multilevel structures for laminar flow design

Laminar flow design is one of the most effective ways to reduce the drag of a commercial aircraft by expanding the laminar flow region on the surface of the aircraft. As material science develops, the emergence of new materials such as low surface energy materials has offered new choices for laminar flow design of commercial aircraft. Different types of low surface energy micro-nano coatings are prepared to verify the effects on the boundary layer transition position and the drag of the airfoil through wind tunnel tests. The infrared thermal imaging technology is adopted for measuring the boundary layer transition, while the momentum integral approach is employed to measure the drag coefficient through a wake rake. Infrared thermal imaging results indicate that the coatings are capable of moving backward the boundary layer transition position at both a low velocity of Mach number 0.15 and a high velocity of Mach number 0.785. Results of the momentum integral approach demonstrate that the drag coefficients are reduced obviously within the cruising angle of attack range from 1° and 5° by introducing the low surface energy micro-nano coating technology.     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

无轴承开关磁阻电机平均悬浮力控制策略

 无轴承开关磁阻电机是一个复杂的非线性系统,因此其控制策略的研究非常重要。高速时由于反电势的增加,使悬浮绕组开通时刻电流难以跟踪,导致瞬时悬浮力难以控制,因此有必要研究基于平均悬浮力和平均转矩的无轴承开关磁阻电机控制策略。根据无轴承开关磁阻电机的悬浮原理和数学模型,设计平均悬浮力和平均转矩的控制策略。主绕组电流和悬浮绕组电流均采用方波控制。推导了平均悬浮力与绕组电流之间的关系,以及主绕组电流和悬浮绕组电流的计算公式。给出了超前角和绕组电流的计算流程。针对12/8结构的无轴承开关磁阻电机,设计了以数字信号处理器TMS320C2812为核心的控制系统。通过实验给出了绕组电流波形和转子位移波形。实验结果显示了电机的稳定悬浮,验证了此控制策略的可行性。