Laminar flow control research at TsAGI: Past and present

This paper presents a brief review of activities in laminar flow control being performed at the Central Aerohydrodynamic Institute named after Prof. N.E. Zhukovsky (TsAGI). These efforts are focused on the improvement of the existing laminar flow control methods and on the development of new ones. The investigations have demonstrated the effectiveness of aircraft surface laminarization applications with the aim of friction drag reduction. The opportunity of considerable delaying of laminar-turbulent transition due to special wing profile geometry and using boundary layer suction and surface cooling has been verified at sub- and supersonic speeds through various wind tunnel testing at TsAGI and during flying laboratory experiments at the Flight Research Institute (LII). The investigations on using hybrid laminar flow control systems for friction drag reduction were also carried out. New techniques of laminar flow control were proposed, in particular, the method of local heating of the wing leading edge, boundary layer laminarization by means of receptivity control, and electrohydrodynamic methods of boundary layer stability control.     

Analytical construction of interception trajectories in atmosphere

For an interception strategy of a removable target by a return space vehicle (RSV), we propose a structure of the control law by the aerodynamic efficiency that determines a chain of the three standard trajectories: nosing-up–free flight–nosing-down. A solution of the terminal problem is to determine numerical values of the control parameters that define moments to switch the RSV flight from one standard trajectory to another.     

Integrated acoustic monitoring system for jet fuel tanks

The paper describes a device and a technique of forming the information processing algorithms used in the integrated acoustic monitoring system for jet fuel tanks, intended for monitoring the level, density and mass of liquid products.     

Sunspot cycle 23 descent to an unusual minimum and forecasts for cycle 24 activity

The decay phase of the sunspot cycle 23 exhibited two unusual features. First, it lasted too long. Second, the interplanetary magnetic field intensity at earth orbit reached the lowest value since in situ measurements in space began in October 1963. These physical anomalies significantly altered the early forecasts for the sunspot activity parameters for cycle 24, made by several colleagues. We note that there was a significant change in the solar behavior during cycle 22. We discuss the observed trends and their effect on our empirical solar activity forecast technique, leading to our prediction for cycle 24 parameters; cycle 24 will be only half as active as cycle 23, reaching its peak in May 2013. We speculate on the possible implications of this outcome on future earth climate change and the ensuing socio-economic consequences.     

Algebraic operations on graphs with using numeric coding for simulating the systems of rocket and space technology

The paper adduces the relators for algebraic operations on graphs using the numeric codes of the graphs. The special algebra of codes has been devised with consideration of the principles of graph transformation. This paper demonstrates the relevance of numeric coding of graphs for solving the problems of enumeration, systematization, and compact representation of the information about the structural and functional characteristics of the systems of flow distribution and conversion of rocket and space technology and for conducting the modeling transformations of given systems in the course of the structural and functional studies as well.     

Storing and processing astrometric and photometric data on NEA: Current state and future in Russia

Numerous discoveries of asteroids unknown earlier led to a multiple increase in the number of information on small bodies of the Solar System. Huge volumes of information accumulated and obtained at observations of objects approaching the Earth’s orbit require storing and prompt processing, presenting more and more possibilities for studying distributions of small bodies of the Solar System and ways of their evolution. That is why development of information systems which will contain large volumes of data on small bodies of the Solar System and facilities for processing these data is actual and promising direction of activity.     

Investigation of phase transition-based tethered systems for small body sample capture

This paper summarizes the modeling, simulation, and testing work related to the development of technology to investigate the potential that shape memory actuation has to provide mechanically simple and affordable solutions for delivering assets to a surface and for sample capture and possible return to Earth. We investigate the structural dynamics and controllability aspects of an adaptive beam carrying an end-effector which, by changing material equilibrium phases, is able to actively decouple the end-effector dynamics from the spacecraft dynamics during the surface contact phase. Asset delivery and sample capture and return are at the heart of several emerging potential missions to small bodies, such as asteroids and comets, and to the surface of large bodies, such as Titan.     

Composite model of a research flight simulator for a helicopter with the hingeless main rotor

This paper presents a composite model of a flight simulator. This simulator is intended for carrying out investigative tests of flight dynamics imitation models of a hingeless rotor helicopter. A schematic diagram, composition and operation channels of the flight simulator software are presented. A possibility of applying the control lag is estimated.     

零件表面微观工艺特征性研究 ——产品(零件)工艺技术基础科学问题机理探索

通过研究产品(零件)制造过程、方法、参数等工艺因素,给零件表面及表层带来(留下)特有的微观特征性,首次在高精度惯性仪表和高可靠电磁继电器(机电类)产品制造体系中引入了零件表面微观工艺特征性概念,提出了制造阶段的产品工艺可靠性设计和微观工艺特征(性)分析方法,提出了该类产品制造中的工艺设计更应该关注零件与产品设计原理匹配性和性能特性符合性观点,提出零件制造要从单纯的控制几何精度向控制性能特性转变,从宏观、单一采标的几何参数评价向微观、综合采标的非几何(非尺寸)参数评价模式为主转变的建议.零件表面存在的这种微观特征现象与零件几何精度一样,将对产品制造的合格率、稳定性、可靠性的实现起到至关重要的作用,尤其对产品的合格率影响极大,有必要开展更深入、更系统的研究,以建立起我国自主的高端产品(或零件)制造基准工艺平台.