Features of active sidestick controllers

This paper discusses the advantages of incorporating active sidesticks into a modern aircraft cockpit. Active sidestick controllers for manual pilot inputs in pitch and roll are examined for commercial transport aircraft. Options and requirements for sidesticks are reviewed. The recommendation of an active sidestick controller is developed providing both cross-cockpit coupling and autopilot backdrive capability. These characteristics provide pilot cues identical to traditional cable-linked column/yoke configurations     

Space Shuttle UHF communications performance evaluation

Computational investigations and experimental measurements were performed to evaluate the Space Shuttle UHF communication system performance for payload bay antenna at the proposed new location. To insure adequate communication coverage at relocated new location, the link margin for the Extravehicular Activity (EVA) astronauts and between Space Shuttle Orbiter and International Space Station (SSO-ISS) during rendezvous were analyzed. The multipath effects from the vehicle structures surrounding the antenna were investigated. The Radio Frequency (RF) electromagnetic radiation to the Orbiter Docking System (ODS) pyrotechnics was also analyzed to ensure the EMC/EMI compliances.     

MIT Lincoln Laboratory Journal: fifty years of radar

This review assumes that many non-US readers may not be well-informed about the steps and work in radar development in the US after WW II to the present. Many know MIT by name and recall the famous Radiation Laboratory Series. But the more recent technical history has been less in the "public domain." In an attempt to correct this, one of the key institutions in the field, the MIT Lincoln Laboratory two years ago produced a special issue of their regular publication. Although the document currently at hand is not a book in the strict sense, the size, shape, and editorial comprehensiveness of the MIT Lincoln Laboratory Journal's Fifty-Year Anniversary Issue (12, 2, 2000) justifies calling this article being treated as a book review.     

Road profile recognition for autonomous car navigation and Navstar GPS support

We discuss autonomous car navigation based on updating dead reckoning (DR) by road profile recognition (RPR). The navigation system requires sensors to detect changes in altitude and driving direction which are installed in modern cars for different purposes (e.g. ABS sensors). The layout of the navigation system is discussed and simulations are carried out over driving distances of approximately 150 km on the basis of realistic road data and ordinary sensor accuracies. Positioning errors of lower than 10 m (standard deviation) are observed. To achieve this accuracy the synchronization error between measured and mapped data must be continually estimated. The introduced navigation method is ideal to complete present commercial car navigation systems using Navstar GPS.     

Comments on the Communication and Data Problems Associated with a Mars Trip During a Conjunction Phase

The analysis and comments presented in this paper are meant to establish the general communication parameters associated with Martian flyby probes and with lander and manned vehicles. Fundamental data transfer problems are reviewed to define comparisons and trends of tradeoffs for future studies. Selected focal points are based upon the long propagation path length, with inherent time delays, and the high noise produced by the sun. These problems are magnified because large quantities of data must be obtained to satisfy the needs of the scientific community and the curiosity of an interested public. A comparison of two communication systems is provided: the microwave spectrum and the optical spectrum, as represented by the microwaves at 2.3 GHz and the laser at 6328 ?. A method of cost effectiveness or value received from space missions (a criterion of power input for data quantity received) is also presented.     

Engineering concepts for inflatable Mars surface greenhouses.

A major challenge of designing a bioregenerative life support system for Mars is the reduction of the mass, volume, power, thermal and crew-time requirements. Structural mass of the greenhouse could be saved by operating the greenhouse at low atmospheric pressure. This paper investigates the feasibility of this concept. The method of equivalent system mass is used to compare greenhouses operated at high atmospheric pressure to greenhouses operated at low pressure for three different lighting methods: natural, artificial and hybrid lighting.     

Continuous tracking of cmes using MICA, andLASCO C2 and C3 coronagraphs

In this work we have tracked coronal mass ejections observed with the ground based Mirror Coronagraph for Argentina (MICA) and the Large Angle and Spectroscopic Coronagraph (LASCO) C2 and C3 on board of the Solar and Heliospheric Observatory (SOHO). The MICA telescope is located at El Leoncito (31.8 S, 69.3 W), San Juan (Argentina), since 1997 as part of a bilateral scientific project between Germany and Argentina. SOHO is a project of international cooperation between ESA and NASA. Together these instruments are able to observe the solar corona ranging from 1.05 to 32 solar radii. MICA images the Fe XIV emission line corona and LASCO coronagraphs observe the Thomson scattered white light corona. We have selected events for which there are observations from the three coronagraphs. Using the composite data we were able to obtain height-time diagrams for the corresponding dynamical coronal features traveling outwards in order to determine some of their kinematical properties, i.e., plane of sky velocity and acceleration.     

Surface tension-driven flows in horizontal liquid metal layers

The problem of surface tension-driven flows in horizontal liquid layers has been studied experimentally, and theoretically by direct numerical simulation and small perturbation analysis. We focus our attention on situations in which the depth of the fluid (liquid tin; small Prandtl number, Pr=0.015) is small enough to ensure the predominance of the surface tension forces over those due to the buoyancy. The surface velocity has been experimentally obtained for liquid tin layer with various aspect ratio (length to height) in the range 5<A<83. The thermal gradients are ranged from 5 to 40°K/cm. In the numerical study, the Navier-Stokes and energy equations are solved by an efficient finite difference technique. The parameters governing the flow behaviour in the liquid are varied to determine their effects on thermocapillary convection: the Reynolds number 10<Re<210⁴ and the aspect ratio 2<A<25; with Pr kept constant at Pr=0.015. The linear eigenequation resulting from small spatial disturbances of the Couette flow solution is solved using an Tau-Chebyshev approximation. A notable feature of the theoretical study is the totally different end circulations. In the region near the cold wall a multicell structure is evident. This agrees with the eigensolution which is of complex type, indicating spatial periodicity. In the hot wall region the flow is accelerated to reach the velocity value for the fully-developed Couette flow which is reached under conditions such as Re/A<20. The transition from viscous to boundary layer regime occurs for a critical value (Re/A)_c of nearly about 200, as deduced from the numerical and experimental results.     

Silicon Solar Cell Performance at High Intensities

The theoretical and experimental work performed since 1960 in the area of high-intensity and high-temperature operation of silicon and gallium arsenide photovoltaic devices is reviewed. Test results for conventional 5-grid silicon cells, for specially designed 13-grid silicon cells, and for a GaAs cell are presented parametrically for the illumination intensity range from 0.07 to 2.8 W/cm2 and the temperature range from 30 to 1 50°C. The data cover the 3 points on the currentvoltage characteristic required to reconstruct the full characteristic in the power-generating quadrant. The 13-grid silicon cells showed much better performance than the GaAs cell.     

Augmenting the Linear Variance Equation

A technique is developed to convert the covariance analysis ofcertain time-varying linear systems into time-invariant form, thusallowing an arbitrary time step for the solution of the differentialequations. The result is accomplished by augmenting the linearvariance equation and augmenting the state vector if necessary. Themethod is illustrated with an example showing the covariancepropagation of ring laser gyro errors in a strapdown inertial systeminto navigation errors during turns.