An Experimental Radar Facility

A coherent CW superheterodyne radar system operating at frequencies of 9, 17, 35, and 70 GHz is described. The radars are installed on a free-flight range to study backscattering from wakes of hypersonic-velocity projectiles. Each radar is equipped with a focused-lens antenna oriented at an angle of approximately 45° to the flight axis. Amplitude and phase of the received signal are recorded separately. Some typical results are given to demonstrate the capabilities of the equipment.     

Time-Optimal Control of a Bounded Phase-Coordinate Process II: High-Order Systems with Multiple Control Inputs

This paper considers the problem arising from the design of an autopilot for a large booster. The motion-controlling actuators of the booster have both position and rate limits. The problem is formulated as a bounded phase-coordinate problem and analyzed by the ``backing out of the target' procedure. A method of constructing the optimal control is presented. An example of an oscillatory system with two control inputs is given, and the optimal control is expressed as an explicit time function.     

Estimated Flight Time for Optimum Trajectories

Various methods are presented for estimating the flight time for vehicles which fly an optimum trajectory. A realistic example is considered in order to display the inherent accuracy of each of these methods. Numerical integration methods are found to be the most accurate. Simple formulas are derived for the case where a less accurate estimate is acceptable. All of these methods require less computation than would be required in order to solve the overall optimization problem. Thus any one of these methods can be applied to an onboard guidance scheme or control system which requires a real time estimate of the time-to-go.     

Comments on the Communication and Data Problems Associated with a Mars Trip During a Conjunction Phase

The analysis and comments presented in this paper are meant to establish the general communication parameters associated with Martian flyby probes and with lander and manned vehicles. Fundamental data transfer problems are reviewed to define comparisons and trends of tradeoffs for future studies. Selected focal points are based upon the long propagation path length, with inherent time delays, and the high noise produced by the sun. These problems are magnified because large quantities of data must be obtained to satisfy the needs of the scientific community and the curiosity of an interested public. A comparison of two communication systems is provided: the microwave spectrum and the optical spectrum, as represented by the microwaves at 2.3 GHz and the laser at 6328 ?. A method of cost effectiveness or value received from space missions (a criterion of power input for data quantity received) is also presented.     

Checkout: A Changing Technology

On-board/in-flight checkout of future aerospace systems will necessitate a fundamental departure from today's design and checkout activities. The interrelationship of checkout, incorporated into prime vehicular functions, man as a subsystem, and standardization Of hardware/software must be considered as a functional and integral entity if the efforts of today's long-range planning are to become tomorrow's reality. This paper will describe future systems checkout, maintenance and support considerations, and actions and tentative measures necessary for implementation. The realization of the implementation of these concepts into functional elements will depend, accurately and economically, upon the degree of government perceptiveness and the extent of industrial support.     

Advanced Development of ESG Strapdown Navigation Systems

The fundamental problem of inertial navigation, double integration of acceleration to obtain position, is defined and discussed. Mechanizations of both space-stable and local-vertical platform systems are exhibited. The synthesis problem for an electrically suspended gyro (ESG) strapdown system is defined and discussed: readout, readout errors due to vehicle motion, synchronization of readout with system computer, alignment, correction and calibration for mass unbalance drift, and digital mechanization. Alignment, calibration, and acceleration measurement are also discussed. Sources of error involved in the electronic gimbaling including those peculiar to strapdown configuration are discussed and compared to mechanically gimbaled systems. Advanced developments required in the component and systems areas are listed, and it is shown that such development will lead to reduced complexity, higher accuracy, and increased reliability and utility for inertial systems.     

Recent developments in micrometeoroid simulation

In the first part the state of the art of the most advanced micrometeoroid simulation techniques is reviewed. Then a new accelerator is described, which was developed jointly by the Technische Universität München and the N.A.S.A. George C. Marshall Space Flight Center. Finally the use of this new technique is indicated for basic research in fields other than astronautics.     

High-Sensitivity Quartz Accelerometer for Measurements of Small Accelerations of Spacecraft

A quartz sensor of small accelerations with a capacitive transducer is designed and produced, allowing one to measure spacecraft accelerations with a resolution of 10^–7 m/s² in the range ±10^–1 m/s². The results of calibration of the sensor by the method of inclinations are presented.     

Lunar transportation scenarios utilising the Space Elevator

The Space Elevator (SE) concept has begun to receive an increasing amount of attention within the space community over the past couple of years and is no longer widely dismissed as pure science fiction. In light of the renewed interest in a, possibly sustained, human presence on the Moon and the fact that transportation and logistics form the bottleneck of many conceivable lunar missions, it is interesting to investigate what role the SE could eventually play in implementing an efficient Earth to Moon transportation system. The elevator allows vehicles to ascend from Earth and be injected into a trans-lunar trajectory without the use of chemical thrusters, thus eliminating gravity loss, aerodynamic loss and the need of high thrust multistage launch systems. Such a system therefore promises substantial savings of propellant and structural mass and could greatly increase the efficiency of Earth to Moon transportation. This paper analyzes different elevator-based trans-lunar transportation scenarios and characterizes them in terms of a number of benchmark figures. The transportation scenarios include direct elevator-launched trans-lunar trajectories, elevator launched trajectories via L1 and L2, as well as launch from an Earth-based elevator and subsequent rendezvous with lunar elevators placed either on the near or on the far side of the Moon. The benchmark figures by which the different transfer options are characterized and evaluated include release radius (RR), required delta v, transfer times as well as other factors such as accessibility of different lunar latitudes, frequency of launch opportunities and mission complexity. The performances of the different lunar transfer options are compared with each other as well as with the performance of conventional mission concepts, represented by Apollo.     

Aqueous corrosion of phosphide minerals from iron meteorites: a highly reactive source of prebiotic phosphorus on the surface of the early Earth

We present the results of an experimental study of aqueous corrosion of Fe-phosphide under conditions relevant to the early Earth. The results strongly suggest that iron meteorites were an important source of reactive phosphorus (P), a requirement for the formation of P-based life. We further demonstrate that iron meteorites were an abundant source of phosphide minerals early in Earth history. Phosphide corrosion was studied in five different solutions: deionized water, deionized water buffered with sodium bicarbonate, deionized water with dissolved magnesium and calcium chlorides, deionized water containing ethanol and acetic acid, and deionized water containing the chlorides, ethanol, and acetic acid. Experiments were performed in the presence of both air and pure Ar gas to evaluate the effect of atmospheric chemistry. Phosphide corrosion in deionized water results in a metastable mixture of mixed-valence, P-bearing ions including pyrophosphate and triphosphate, key components for metabolism in modern life. In a pH-buffered solution of NaHCO(3), the condensed and reduced species diphosphonate is an abundant corrosion product. Corrosion in ethanol- and acetic acid-containing solutions yields additional P-bearing organic molecules, including acetyl phosphonate and a cyclic triphosphorus molecule. Phosphonate is a major corrosion product of all experiments and is the only P-bearing molecule that persists in solutions with high concentrations of magnesium and calcium chlorides, which suggests that phosphonate may have been a primitive oceanic source of P. The stability and reactivity of phosphonate and hypophosphite in solution were investigated to elucidate reaction mechanisms and the role of mineral catalysts on P-solution chemistry. Phosphonate oxidation is rapid in the presence of Fe metal but negligible in the presence of magnetite and in the control sample. The rate of hypophosphite oxidation is independent of reaction substrate.