Extensions of the Discrete-Average Models for Converter Power Stages

An improved power converter model is developed by combining the average and discrete modeling techniques. The parameter determination of the proposed discrete-average model is shown to be dependent on the type of duty cycle control law and the nature of the error processor used in the feedback loop. Furthermore, the paper pinpoints deficiencies of the conventional loop gain measurement technique which is widely used in industries.     

Ultraviolet spectrometer experiment for the Voyager mission

The Voyager Ultraviolet Spectrometer (UVS) is an objective grating spectrometer covering the wavelength range of 500–1700 Å with 10 Å resolution. Its primary goal is the determination of the composition and structure of the atmospheres of Jupiter, Saturn, Uranus and several of their satellites. The capability for two very different observational modes have been combined in a single instrument. Observations in the airglow mode measure radiation from the atmosphere due to resonant scattering of the solar flux or energetic particle bombardment, and the occultation mode provides measurements of the atmospheric extinction of solar or stellar radiation as the spacecraft enters the shadow zone behind the target. In addition to the primary goal of the solar system atmospheric measurements, the UVS is expected to make valuable contributions to stellar astronomy at wavelengths below 1000 Å.     

Design of the HEAO Main Bus Shunt Regulator

The High Energy Astronomy Observatory (HEAO) main bus regulator contains a redundant error amplifier (REA) and a 12-section sequenced shunt transconductance amplifier (STA) in which not more than three and not less than one shunt section are in an active control mode regardless of a failure in any one of the twelve sections. The part of the work concerned with the shaping of the frequency response of the REA and STA minor feedback loops and of the teolator major feedback loop is described. Emphasis is on the application of a general design technique embodying a "design-analyze-measure iteration loop," in which a first-cut design and analysis is corrected ard improved after experimental observation of discrepancies and deficiencies. In particular, an incipient high-frequency oscillation was thereby reliably eliminated. It is demonstrated that analysis techniques involving a minimum of algebra can provide full quantitative information on an efficient and reliable system design.     

A methodology for addressing support equipment obsolescence

The rapid growth of technology over the last twenty years is providing vastly improved capabilities for both avionics and avionics test systems. Unfortunately, an environment of rapid technological growth breeds a corresponding environment of rapid technological obsolescence. Test systems developed fifteen years ago are becoming increasingly more difficult to support due to obsolescence issues and, additionally, such a test system does not reflect the current state-of-the-art for automatic test equipment. The ability of a test system to evolve is essential to providing cost-effective support systems for electronic systems. The F-15 Tactical Electronic Warfare System (TEWS) Intermediate Support System (TISS) was developed under the Modular Automatic Test Equipment (MATE) guidelines to support the suite of F-15 electronic warfare LRUs. MATE imposed hardware architecture constraints, which were factors that contributed to its abandonment. However, the modular aspect of MATE has provided a system that can easily evolve with technological advancements. Modularity is the cornerstone of modern software systems and this is the aspect that has been exploited in the evolution of the TISS     

Adaptive cancellation method for geometry-induced nonstationary bistatic clutter environments

This paper describes and characterizes a new bistatic space-time adaptive processing (STAP) clutter mitigation method. The approach involves estimating and compensating aspects of the spatially varying bistatic clutter response in both angle and Doppler prior to adaptive clutter suppression. An important feature of the proposed method is its ability to extract requisite implementation information from the data itself, rather than rely on ancillary - and possibly erroneous or missing - system measurements. We justify the essence of the proposed method by showing its ability to align the dominant clutter subspaces of each range realization relative to a suitably chosen reference point as a means of homogenizing the space-time data set. Moreover, we numerically characterize performance using synthetic bistatic clutter data. For the examples considered herein, the proposed bistatic STAP method leads to maximum performance improvements between 17.25 dB and 20.75 dB relative to traditional STAP application, with average improvements of 6 dB to 10 dB.     

Exploiting GNSS signal structure to enhance observability

There are a number of different error sources, such as multipath and thermal noise, which corrupt satellite navigation waveforms from their theoretical structure. However, even under ideal conditions the broadcast signals have some degree of deformation as a result of the practical individual hardware implementation. For the most demanding users of satellite navigation, such as aircraft navigation and landing systems, it is important to characterize the nominal signal structure in order to detect minimal variations resulting from hardware-based errors. Thus far such precorrelation Global Navigation Satellite System (GNSS) signal quality monitoring has been performed through high gain antennas, which allow for raising the GNSS spectrum above the thermal noise floor and observing the structure of the signal directly at the front end output. This paper describes a new approach to achieve such observability based on signal processing techniques, such as dithering and averaging, which leverage the repetitive nature of the GNSS signal. The paper presents how these techniques can drastically improve the signal-to-noise ratio (SNR) in postprocessing, allowing for the direct analysis of GNSS signals using traditional front end designs and conventional antennas. Results are predicted using the appropriate theory and validated using data collected from the Global Positioning System (GPS).     

Search radar detection and track with the Hough transform. II.detection statistics

For pt.I see ibid., vol.30, no.1, (Jan.1994). This paper describes the calculation of P_F and P_D for the Hough transform technique when the primary threshold crossings are weighted by their power before transforming (i.e., noncoherent integration). After expressions for P_F and P_D are derived, we examine the question of optimal granularity of the Hough accumulator space. We also investigate the relationship between primary and secondary thresholds and its effect on detectability     

Investigation of corona initiation voltage at reduced pressures

The results of an experimental study of the 60 Hz ac corona inception voltage at reduced pressures for a cylindrical conductor and a parallel ground plane are presented. Several spacings and bare and insulated conductors of several diameters are considered. Empirical expressions from which a reasonably accurate prediction of the corona inception voltage (CIV) may be made have been inferred from experimental data     

On the relation between the mass loss rate and the stellar parameters of OB-type stars

We discuss mass loss relations for OB-type stars as a function of luminosity, effective temperature, and mass. We conclude that a simple first order linear regression relation is as good as any other more sophisticated relation, with the advantage that the simple form consumes much less computer time when used in evolutionary codes.