Utilization of white potatoes in CELSS.

Potatoes (Solanum tuberosum) have a strong potential as a useful crop species in a functioning CELSS. The cultivar Denali has produced 37.5 g m-2 d-1 when grown for 132 days with the first 40 days under a 12-h photoperiod and a light:dark temperature cycle of 20 degrees C:16 degrees C, and then 92 days under continuous irradiance and a temperature of 16 degrees C. Irradiance was at 725 micromoles m-2 s-1 PPF and carbon dioxide at 1000 micromoles mol-1. The dried tubers had 82% carbohydrates, 9% protein and 0.6% fat. Other studies have shown that carbon dioxide supplementation (1000 micromoles mol-1) is of significant benefit under 12-h irradiance but less benefit under 24 h irradiance. Irradiance cycles of 60 minutes light and 30 minutes dark caused a reduction of more than 50% in tuber weight compared to cycles of 16 h light and 8 h dark. A diurnal temperature change of 22 degrees C for the 12-h light period to 14 degrees C during the 12-h dark period gave increased yields of 30% and 10% for two separate cultivars, compared with plants grown under a constant 18 degrees C temperature. Cultivar screening under continuous irradiance and elevated temperatures (28 degrees C) for 8 weeks of growth indicated that the cvs Haig, Denali, Atlantic, Desiree and Rutt had the best potential for tolerance to these conditions. Harvesting of tubers from plants at weekly intervals, beginning at 8 weeks after planting, did not increase yield over a single final harvest. Spacing of plants on 0.055 centers produced greater yield per m2 than spacing at 0.11 or 0.22 m2. Plants maintained 0.33 meters apart (0.111 m2 per plant) in beds produced the same yields when separated by dividers in the root matrix as when no separation was made.     

Transient Nonstationary Behavior of a Delay Line Discriminator

The development of numerical methods for studying the transient nonstationary behavior of a delay line discriminator is presented. Expressions are developed for the mean and the variance of the output noise process. For the cases where the output is stationary, power density spectra are found.     

Direct Energy Transfer for High Efficiency Photovoltaic Energy Systems Part I: Concepts and Hypothesis

This two-part paper presents a comprehensive comparative study on parallel power processing (PPP) and standard schemes in dc/dc converters for photovoltaic (PV) energy systems. It is demonstrated how PPP can improve direct energy transfer (DET), which results in PV systems operating at higher voltage and efficiency. Discussions of the concepts, hypotheses and computer simulations are presented in Part I. Part II provides the experimental results, which confirm the validity of the analysis and simulations.     

Testing the Stability of the Fine Structure Constant in the Laboratory

In this review we discuss the progress of the past decade in testing for a possible temporal variation of the fine structure constant α. Advances in atomic sample preparation, laser spectroscopy and optical frequency measurements led to rapid reduction of measurement uncertainties. Eventually laboratory tests became the most sensitive tool to detect a possible variation of α at the present epoch. We explain the methods and technologies that helped to make this possible.     

Integrated Planning and Execution for Autonomous Spacecraft

An autonomous spacecraft must balance long-term and short-term considerations. It must perform purposeful activities that ensure long-term science and engineering goals are achieved and ensure that it maintains positive resource margins. This requires planning in advance to avoid a series of shortsighted decisions that can lead to failure. However, it must also respond in a timely fashion to a somewhat dynamic and unpredictable environment. Thus, in terms of high-level, goal-oriented activity, spacecraft plans must often be modified due to fortuitous events such as early completion of observations and setbacks such as failure to acquire a guidestar for a science observation. This describes an integrated planning and execution architecture that supports continuous modification and updating of a current working plan in light of a changing operating context.     

Launch Envelope Optimization of Virtual Sliding Target Guidance Scheme

This paper presents an optimization of the performance of a recently proposed virtual sliding target (VST) guidance scheme in terms of maximization of its launch envelope for three-dimensional (3-D) engagements. The objective is to obtain the launch envelope of the missile using the VST guidance scheme for different lateral launch angles with respect to the line of sight (LOS) and demonstrate its superiority over kinematics-based guidance laws like proportional navigation (PN). The VST scheme uses PN as its basic guidance scheme and exploits the relation between the atmospheric properties, missile aerodynamic characteristics, and the optimal trajectory of the missile. The missile trajectory is shaped by controlling the instantaneous position and the speed of a virtual target which the missile pursues during the midcourse phase. In the proposed method it is shown that an appropriate value of initial position for the virtual target in 3-D, combined with optimized virtual target parameters, can significantly improve the launch envelope performance. The paper presents the formulation of the optimization problem, obtains the approximate models used to make the optimization problem more tractable, and finally presents the optimized performance of the missile in terms of launch envelope and shows significant improvement over kinematic-based guidance laws. The paper also proposes modification to the basic VST scheme. Some simulations using the full-fledged six degrees-of-freedom (6-DOF) models are also presented to validate the models and technique used.     

Detection of Thin Lines using Low-Quality Video from Low-Altitude Aircraft in Urban Settings

A novel thin line detection algorithm for use in low-altitude aerial vehicles is presented. This algorithm is able to detect thin obstacles such as cables, power lines, and wires. The system is intended to be used during urban search and rescue operations, capable of dealing with low-quality images, robust to image clutter, bad weather, and sensor artifacts. The detection process uses motion estimation at the pixel level, combined with edge detection, followed by a windowed Hough transform. The evidence of lines is tracked over time in the resulting parameter spaces using a dynamic line movement model. The algorithm's receiver operating characteristic curve (ROC) is shown, based on a multi-site dataset with 86 videos with 10160 wires spanning in 5576 frames.     

A technique for selecting a rational variant of a multifunctional aircraft system

A technique for selecting a rational variant of a multifunctional aircraft system using the analytic hierarchy process is proposed and a solution of a practical problem is presented.     

Development of an Italian low cost GNSS/INS system universally suitable for mobile mapping

The first studies for the mobile mapping and creation of a vehicle for this kind of research was carried out by Canadian Researchers in the 1980s. Since then, these vehicles have been widely employed in several applications (road cadastre maps, terrestrial photogrammihetry, road sign recognition, etc.) for both commercial and research purposes throughout the world. Many GNSSIINS vehicles which can be equipped in different ways with one or more GPS, inertial sensors, and one or several cameras, have been realized. A characteristic shared by most of these devices concerns the high costs of the sensors, of the realization and of the maintenance. For this reason, a GNSSIINS system, that is suitable for any vehicle, made up of low cost devices (two GPS receivers, an INS, and a camera rigidly placed on a metallic bar), has been designed and built by our research group. Two tests run at different velocities have been carried out to evaluate the reliability of the system. After a presentation of the system, the differences that were witnessed during the application of these calibration methods are explained herein.     

Investigating Earth’s Atmospheric Electricity: a Role Model for Planetary Studies

The historical development of terrestrial atmospheric electricity is described, from its beginnings with the first observations of the potential gradient to the global electric circuit model proposed by C.T.R. Wilson in the early 20th century. The properties of the terrestrial global circuit are summarised. Concepts originally needed to develop the idea of a global circuit are identified as “central tenets”, for example, the importance of radio science in establishing the conducting upper layer. The central tenets are distinguished from additional findings that merely corroborate, or are explained by, the global circuit model. Using this analysis it is possible to specify which observations are preferable for detecting global circuits in extraterrestrial atmospheres. Schumann resonances, the extremely low frequency signals generated by excitation of the surface-ionosphere cavity by electrical discharges, are identified as the most useful single measurement of electrical activity in a planetary atmosphere.