Order of magnitude analysis of convective effects in dendritic solidification

The different types of convective phenomena which may occur during the dendritic solidification of metallic alloys are discussed from an order of magnitude analysis. Bulk thermal convection and/or interdendritic solutal convection have to be considered according to the values of the experimental data. Scaling laws for the solute boundary layer resulting from bulk thermal convection have already been derived. It is shown here that the interdendritic flow depends on a solutal Grashof number Gr based on the horizontal density gradient and a characteristic length L_s which is of the order of the liquid channels width. For Gr < 1, which is generally verified in practical cases, the interdendritic flow velocity U_r is proportional to the Grashof number. This a priori law compares favorably with the results of horizontal solidification experiments where the mean interdendritic flow velocity has been estimated from the resulting measured macrosegregation. In these experiments, as well as for most horizontal dendritic solidifications of metallic alloys at 1 g, the ratio $\text{U}{}_{\mathrm{r}}\text{R}$ (R is the growth rate) is of order one. In order to cancel the interdendritic flow effects, this ratio has to be lowered by one order of magnitude. According to our analysis, this can be obtained by performing the experiments either at a slightly reduced g level (～10^?1 g), or at 1 g in a vertical stable configuration with a sufficiently low residual horizontal thermal gradient.     

Methods for rotor aerodynamic and dynamic analysis

The complex problems associated with the aerodynamics of blade/vortex interactions, the dynamics of a blade displaced out of its plane of rotation, and the position control of a hovering helicopter are discussed. Simplified models help to describe, and appear to be adequate for analysing, many aspects of these problems. Free wake analyses are shown to be of importance in determining blade loads and performance for hovering flight or for wind turbines. Unsteady aerodynamics and careful definition of the wake formation are required when computing vibratory airloads in forward flight.     

The interest of information obtained by incoherent scatter technique

Incoherent scatter measurements are of great value for establishing and improving the IRI. This holds, in particular, for the topside electron density profile, for the valley occurring under certain conditions between regions E and F, and for the electron and ion temperature profiles. Extension in time of the observations could be very helpful for future work on IRI.     

Nondestructive testing of honeycomb structures by computerized,thermographic systems

Complex honeycomb space structures (i.e. antennas, solar panels, etc.) must be inspected and accurately tested before flight.The thermography can be employed with success for the detection of the position of defects (delaminations, noneffective bondings, cracks, etc.) and for the evaluation of their size and geometry in all the cases in which the defect acts as a thermal resistance due to the low conductivity of the air filling the defect volume.The basic idea is to create in the specimen a heat flow distribution that is altered by the presence of the defect.The surface temperature distribution is then measured by means of a thermograph and is correlated with the presence of the defect.A numerical analysis and preliminary experiments have been carried out which show the feasibility of the method as applied to honeycomb structures.     

Effect of Observation Errors on Satellite Attitude Estimation

A study of the effect of observation errors on the best least squares estimate of satellite attitude based on two sets of direction measurements, where one set contains two independent measurements which are corrupted by zero-mean normally distributed additive errors, is summarized. Using Monte-Carlo techniques, the statistics of the estimated rotation of the satellite, from a known reference, were obtained. It was found that one of the parameterizations of the rotation, namely, the vector z, is best suited for estimation, since ?z is normally distributed with zero mean and its standard deviation is independent of the two direction measurements.     

An Automatic Data Processing System for Laser Anemometers

An automatic data processing system for the evaluation of statistically occurring Doppler-difference bursts is described. In addition to the higher accuracy compared with the data acquisition procedures known so far, this technique allows the Doppler-difference method to be used as an operational instrument for investigations into turbulent flows, especially in the case of low particle density and extremely small turbulence degrees.     

Survey of High-Power Microwave Filters

A summary of research and development work on high-power microwave filters is given here: first, design considerations in high-power microwave filters?power handling capacity, waveform distortion, multimode suppression, and stop and pass band characteristics; second, a discussion of filtering devices and techniques in two broad categories-dominant mode filters and harmonic filters (discussion covers methods of operation and significant characteristics of each filter developed to date); and third, a discussion of applications and limitations of filters in various systems and interference situations. Also included are the availability, cost, size, weight, etc. as functions of frequency for the various filter types.