The Search Coil Magnetometer for THEMIS

THEMIS instruments incorporate a tri-axial Search Coil Magnetometer (SCM) designed to measure the magnetic components of waves associated with substorm breakup and expansion. The three search coil antennas cover the same frequency bandwidth, from 0.1 Hz to 4 kHz, in the ULF/ELF frequency range. They extend, with appropriate Noise Equivalent Magnetic Induction (NEMI) and sufficient overlap, the measurements of the fluxgate magnetometers. The NEMI of the searchcoil antennas and associated pre-amplifiers is smaller than 0.76 pT $/\sqrt{\mathrm{Hz}}$ at 10 Hz. The analog signals produced by the searchcoils and associated preamplifiers are digitized and processed inside the Digital Field Box (DFB) and the Instrument Data Processing Unit (IDPU), together with data from the Electric Field Instrument (EFI). Searchcoil telemetry includes waveform transmission, FFT processed data, and data from a filter bank. The frequency range covered depends on the available telemetry. The searchcoils and their three axis structures have been precisely calibrated in a calibration facility, and the calibration of the transfer function is checked on board, usually once per orbit. The tri-axial searchcoils implemented on the five THEMIS spacecraft are working nominally.     

Calculation of decoupling zeroes in the multiconnected dynamic system

A recursive method for calculating decoupling zeroes in the linear multiconnected dynamic system based on the application of matrix canonization techniques is proposed. Its essence is that the problem dimension is successively decreased and reduced to finding eigenvalues of some matrix. The results obtained can be used to check controllability and observability as well as to calculate uncontrollable and unobservable modes of the dynamic system.     

Computation of aircraft geometric height under radar surveillance

A radar system for geometric height estimation of civil aircraft is described. The system consists of one standard or mode S secondary surveillance radar (SSR) and one omnidirectional antenna sited away from SSR under an airplane. The geometric height is derived by trilateration. Systematic errors are compensated for by deriving the profile of the effect on height measurements of the bias in range measurements. A curve-fitting technique is then used, which estimates both the geometric height and any non-zero systematic errors     

Monopulse-radar angle tracking in noise or noise jamming

In many monopulse radars, feedback in the angle-tracking servo system is taken to be directly proportional to the monopulse ratio. In those radars, monopulse measurements are conditioned on simultaneous occurrences of receiver sum-channel video exceeding a detection threshold: if a detection fails to occur, the measurement is ignored, and the angle-tracking servo is made to coast. Such conditioning is shown to be necessary in order that the noise power be finite in the servo feedback. The conditional mean value and conditional variance of the monopulse ratio are derived and quantified in terms of threshold level as well as signal-to-noise ratio. The formulation permits the noise covariance between receiver difference and sum channels to be complex rather than only real-valued, so that the sources of noise jamming are not required to be positioned in the receiving-antenna mainlobe and to be copolarized with the antenna response there. Nonfluctuating and Rayleigh-fluctuating target cases are considered and compared, and fluctuation loss is quantified     

A technique for numerical modeling of liquid film disintegration in the pneumatic injector of aircraft engines

A technique for calculating the two-phase flows in the pneumatic injector of the aircraft engine is developed based on solving the model problem, namely, on verification of the two-phase flow model by means of solving the problem of liquid column disintegration under the effect of an incident airflow. We determine the turbulence models that satisfactorily describe the biphase flow processes.     

SAMI3_ICON: Model of the Ionosphere/Plasmasphere System

Space Science Reviews - The NRL ionosphere/plasmasphere model SAMI3 has been modified to support the NASA ICON mission. Specifically, SAMI3_ICON has been modified to import the thermospheric...     

The Extinct Radionuclide Timescale of the Early Solar System

The tendency of iodine to be mobilised during secondary processing is reflected both in the presence of ¹²⁹Xe_XS in secondary minerals and in the bulk ¹²⁹Xe_XS/I ratios in meteorites. Comparison of absolute ages derived through calibration of chronometers based on ¹²⁹Xe, ⁵³Mn and ²⁶Al against the Pb-Pb system yields a plausible timescale for the early solar system. In this system, the earliest chondrule ages are most readily interpreted as representing formation after the beginning of parent body processing. This revised version was published online in June 2006 with corrections to the Cover Date.     

Tracking a maneuvering target using sensors of variable quality

In an environment subject to sudden change, the accuracy of tracking and prediction is strongly influenced both by the sensor architecture and by the quality of the sensors. An image-enhanced algorithm is presented for both path following and covariance estimation in applications where the sensors are subject to sudden and unpredictable variation in quality. For an illustrative trajectory, the performance of the algorithm is contrasted with an extended Kalman filter (EKF) and an image-enhanced algorithm based upon the nominal sensors     

Reduced-rank STAP performance analysis

The space-time radar problem is well suited to the application of techniques that take advantage of the low-rank property of the space-time covariance matrix. It is shown that reduced-rank (RR) methods outperform full-rank space-time adaptive processing (STAP) when the space-time covariance matrix is estimated from a data set with limited support. The utility of RR methods is demonstrated by theoretical analysis, simulations and analysis of real data. It is shown that RR processing has two opposite effects on the performance: increased statistical stability which tends to improve performance, and introduction of a bias which lowers the signal-to-noise ratio (SNR). A method for evaluating the theoretical conditioned SNR for fixed RR transforms is also presented. It Is shown that while best performance is obtained using data-dependent transforms, the loss incurred by the application of fixed transforms (such as the discrete cosine transform) may be relatively small. The main advantage of fixed transforms is the availability of efficient computational procedures for their implementation. These findings suggest that RR methods could facilitate the development of practical, real-time STAP technology