Aircraft vertical profile implementation using directed-graphmethods

Aircraft vertical profile simulation is realized using a demand-driven minimal-calculation directed graph structure to reduce calculation time and to force synchronization of the performance measurement functions with the system state variables. Performance-directed model adaptation makes dynamic vertical profile path corrections, in the presence of fixed drag variations, possible. Drag variations ranging from +10% to -10% yielded fuel consumption improvements of less than 1% in the majority of the cases. Calculation time improvement for path simulation ranges from a factor of 1.19 in the worst case to 1.5 in the best case     

Experimental work on the aerodynamics of integrated slender wings for supersonic flight

This paper reviews an extensive programme of experimental work which was aimed at the production of integrated slender wings which had volume distributions and cross-section shapes compatible with the requirements of a supersonic transport aircraft. The wings were also to be cambered so that they were trimmed at the cruise condition about a centre of gravity position located at the aerodynamic centre position at the approach condition; furthermore the camber was to be chosen so that the drag was as low as possible. The main work was carried out about 20 years ago, but the involvement in specific design applications resulted in no overall account of the programme being published, although a number of reports on individual wings, or groups of wings, have appeared. This paper reviews the whole programme from the initial tests on very simple delta wings with diamond cross-sections to the final tests on realistic shapes which achieved almost all of the design requirements.     

A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

An Optimal Normalization Scheme

An attitude normalization scheme, based on quaternion updates' of the attitude matrix in a strapdown system, is presented which is optimal in the two-norm sense. Furthermore, the algorithm requires minimal computer time and memory load.     

Growth and development of cultured carrot cells and embryos under spaceflight conditions

Morphogenetically competent proembryonic cells and well-developed somatic embryos of carrot at two levels of organization were exposed for 18.5 days to a hypogravity environment aboard the Soviet Biosatellite Cosmos 1129. It was confirmed that cultured totipotent cells of carrot can give rise to embryos with well-developed roots and minimally developed shoots. It was also shown that the space hypogravity environment could support the further growth of already-organized, later somatic embryonic stages and give rise to fully developed embryo-plantlets with roots and shoots.     

Vertical profiles of halocarbons in the stratosphere

Stratospheric air samples collected between 10 and 35 km altitude my means of a cryogenic sampler were analyzed by gaschromatography. Thus vertical profiles of source gases for halogen radicals were derived, such as CCl₄, CCl₃F, CCl₂F₂, CClF₃, CF₄, C₂F₃Cl₃, C₂F₄Cl₂, C₂F₅Cl, C₂F₆, CH₃Cl, CH₃CCl₃, CHF₂Cl, CH₃Br, CBrF₃, and CBrCl₂F. Systematic discrepancies between measured and modelled halocarbon profiles point to deficiencies of present one- and two-dimensional models. Measurements of fully halogenated hydrocarbons provide a tool for systematically studying these deficiencies and thus improving the models.     

A Nonlinear Tracker Using Attitude Measurements

The subject of this paper involves tracking the present position of a maneuvering aircraft as well as predicting its future position. A tracking filter is developed that uses aircraft attitude angles (yaw, pitch, roll) in addition to the usual radar measurements. Computer simulation of tracker performance when tracking violently maneuvering aircraft indicates that a dramatic improvement is obtained by using attitude information. The approach taken is to develop a 12-or 15-state extended Kalman filter that models both translational and rotational degrees of freedom. By measuring and estimating attitude it is possible to approximately determine the magnitude and direction of the force system acting on the vehicle and therefore determine vehicle linear acceleration. Knowledge of acceleration is then used to improve the estimate of present and future position of the vehicle being tracked. Simulation of a T-38 aircraft performing a 5 g turn indicates that the new tracker produces maximum trajectory prediction errors that are 36 percent of the errors experienced by more conventional trackers.     

Application of remote sensing techniques in mineral resources survey — a case study pertaining to Singhbhum Shear Zone,Bihar, India

Geological analysis and evaluation of digitally processed and enhanced LANDSAT MSS data products for three test areas of Singhbhum Shear Zone, India has led to certain significant results regarding optimisation and utility of such techniques for geological studies and obtaining additional/new information regarding lithology and structure. Three band-to-band ratio images are found to give best results. Lithologic formations could be subdivided into a number of units. The Westward and southeastward extension of the shear zone could be delineated thereby indicating scope of mineralisation in these parts.     

Skylab experiment results: hematology studies

These studies were designed and coordinated to evaluate specific aspects of man's immunologic and hematologic systems which might be altered by or respond to the space flight environment. The biochemical functions investigated included cytogenetic damage to blood cells, immune resistance to disease, regulation of plasma and red cell volumes, metabolic processes of the red blood cell, and physical chemical aspects of red blood cell functions. Only minor changes were observed in the functional capacity of erythrocytes as determined by measuring the concentrations of selected intracellular enzymes and metabolites. Tests of red cell osmotic regulation indicated some elevation in the activity of the metabolic dependent Na-K pump, with no significant alterations in the cellular Na and K concentrations or osmotic fragility. A transient shift in red cell specific-gravity profile was observed on recovery, possibly related to changes in cellular water content. Measurements of hemoconcentration (hematocrit, hemoglobin concentration, red cell count) indicated significant fluctuations postflight, reflecting observed changes in red cell mass and plasma volume. There was no apparent reticulocytosis during the 18 days following the first manned Skylab mission in spite of a significant loss in red cell mass. However, the reticulocyte count and index did increase significantly 5 to 7 days after completion of the second, longer duration, flight. There were no significant changes in either the while blood cell count or differential. However, the capacity of lymphocytes to respond to an in vitro mitogenic challenge was repressed postflight, and appeared to be related to mission duration. The cause of this repression is unknown at this time. Only minor differences were observed in plasma protein patterns. In the second mission there were changes in the proteins involved in the coagulation process which suggested a hypercoagulative condition.     

Linear FM Signal Formats for Beacon and Communication Systems

This paper examines the capabilities of the class of linear FM spread-spectrum signals within the context of potential communications systems usage in order to establish some performance criteria and bounds that permit comparison with other spread-spectrum formats. A systematic basis is provided for parameter selection for this class of signals by examining the interaction a mong the frequency-modulation indices, time-bandwidth product, and cross-talk criteria that determine the number of effective linear FM signals (or channels) that can be used within the constraints of a bounded time-frequency region. A general expression is derived relating N, the number of useful signals, R2, a cross-talk parameter, ToWo, the mean time-bandwidth product, and ?max and ?min, the maximum and minimum FM rates of the signal set. Canonic signal processor structures are described for ensembles of linear FM signals that have either constant duration or constant bandwidth. It is then shown that the signal modulation format can be modified in accordance with classical paired-echo theory to expand the utility of this class of signals in both synchronous and nonsynchronous operations to yield the equivalent of time-division and code multiplexing. Possible applications for this signal format are discussed.