碳粉燃料在火箭冲压发动机补燃室内燃烧特性的分析

采用概率密度函数(PDF)及确定轨道模型数值模拟一种环向进气的固体火箭冲压发动机补燃室气固两相流的掺混燃烧,考虑固体颗粒直径大小和补燃室长度对燃烧效率的影响。结果表明:增大固体颗粒直径,燃料的燃烧效率明显减小;增大补燃室长度,燃料的燃烧效率增大。     

航空发动机过渡态全局寻优控制方法研究

为了对发动机的动态过程进行控制, 提出了一种基于SQP的全局寻优控制方法.每一步寻优过程分为长程优化和短程优化两个阶段.根据长程优化结果, 重构了关联目标函数, 在此基础上, 进行了短程优化修正, 并利用修正结果进行控制.将这种方法应用于某型航空发动机的过渡态控制中, 得到了理想的控制结果.仿真结果表明该方法能较好地解决一般局部优化方法在有纯延迟、模型失配等情况下的优化控制效果下降的问题.      

基于T-S模糊系统的空天飞行器鲁棒自适应轨迹线性化控制

 基于T-S模糊系统提出了鲁棒自适应轨迹线性化控制(RATLC)方法。利用T-S模糊系统逼近未知干扰和不确定性因素,并采用Lyapunov方法设计了鲁棒自适应控制律。不论系统状态的维数和用于逼近不确定的模糊系统规则数为多少,整个系统仅有两个参数在线调整。理论分析证明了闭环系统所有信号一致最终有界。应用提出的控制方案设计了空天飞行器(ASV)飞行控制系统,并在高超声速飞行条件下进行了仿真验证,仿真结果表明了控制方案的有效性和鲁棒性。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

空间辐射环境单粒子效应研究

文章介绍了空间辐射环境对航天器电子元器件产生的单粒子效应的国内外研究情况,从环境模拟方法、模拟试验设备、单粒子效应及防护以及飞行试验等方面进行了分析比较。文章对国内研究发展提出了一些建设性的建议。     

基于磁路法与等效热网络法的航天 永磁同步电机设计与仿真

针对航天永磁同步电机方案初步设计耗时长、过度依赖商业软件的问题,基于磁路法和热网络法,提出了一套方案设计阶段航天永磁同步电机磁热性能快速预估与仿真方法。给出了定子内径、定子外径、铁芯长度、匝数等关键参数的取值准则,建立了包含36个节点集总参数热网络模型,并以端部绕组为例给出了热平衡方程的详细推导过程。通过与成熟商业软件对比,其电磁计算最大误差出现在电流有效值上,偏差值为607%;与样机实测值对比,绕组温升最大误差为73%,满足方案设计阶段预示精度要求,为方案设计阶段航天永磁同步电机快速性能预估提供有力支撑。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

典型加筋板的优化设计

对飞机结构设计中典型加筋板优化设计问题进行了研究 ,对典型加筋板形式、优化问题、计算方法和优化策略进行了描述 ,编写了优化设计程序 ,并进行了算例考核。计算结果表明 ,优化设计结果合理 ,可对该类加筋板的结构设计提供参考和指导。     

发动机试车和数据采集自动化的双微机系统

本文介绍一个双微机对话型实现航空发动机试车和采集数据自动化的微机系统。两台微机分别完成发动机工作状态的控制、显示和发动机试车数据的采集,打印,重要物理参数的监控,应急处理等。两台微机间的相互通讯,可使发动机的状态控制和数据的采集按预定程序交替或同步进行,从而实现自动化的目的。本文对系统的软、硬件结构作了详细的介绍,在目前国内通用试车台的基础上,硬件的改装工作量很小,实现很方便。手动和自动控制间的切换迅速而可靠。本系统在发动机试车台上进行了试验,并通过了航空工业部部级鉴定。     

大攻角非对称涡特性及消除侧向力和力矩方法

本文提出了一个消除非对称力的头部外形方案。通过风洞实验,论证了方案是有效和稳定的。实验发现由对称涡向非对称涡的转变有一个不稳定区,建议用动态测力,得到与激光蒸汽屏流场相一致的结果,并研究其相互关系。