EXPERIMENTAL STUDY OF TURBULENT WINGBODY JUNCTION AND WAKE FLOW

ＥＸＰＥＲＩＭＥＮＴＡＬ　ＳＴＵＤＹ　ＯＦ　ＴＵＲＢＵＬＥＮＴ　ＷＩＮＧＢＯＤＹ　ＪＵＮＣＴＩＯＮ　ＡＮＤ　ＷＡＫＥＦＬＯＷＫａｎｇＨｏｎｇｗｅｎ；ＦａｎＭｅｎｇ；ＷｅｉＺｈｏｎｇｌｅｉ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃｓ，ＰｅｋｉｎｇＵｎｉ...     

关于有理Bézier曲面片的几何连续拼接问题

本文深入研究了有理Bézier曲面片的几何连续拼接问题,给出了GC~1拼接条件的显式表示和判断两曲面片GC~1拼接状况的判定条件。用此条件可编写一简单程序,通过输入两曲面片的控制顶点及权因子,便可以“YES”或“NO”的输出回答两曲面片的拼接是否为GC~1连续。在非GC~1拼接时,可对称地修改两曲面片使其GC~1拼接。最后,本文给出了几种CAD/CAM工程中实用的充分条件。     

U型脉冲爆震燃烧室的点火起爆工作特性试验研究

为了缩短脉冲爆震燃烧室轴向长度,开展了气液两相U型脉冲爆震燃烧室（U-PDC）点火起爆特性试验研究。试验时采用火花塞点火和热射流点火,且点火能量可调。研究结果表明,两种点火方式均可实现U-PDC工作频率10~30Hz稳定工作,且DDT时间随工作频率提高而缩短,在5~11ms之间。此外,实现U-PDC稳定工作时,热射流所需的点火能量为0.05J较火花塞点火能量1J更低,并且热射流点火DDT距离更短,约718mm,起爆位置距来流入口的轴向距离约280mm,缩短了起爆所需的轴向长度,有利于工程应用。但是,进一步提高热射流点火能量,其DDT距离无明显变化。     

飞行器航迹规划研究现状与趋势

介绍了飞行器航迹规划的特点,从安全性、航迹约束、飞行器的协作性以及规划时间等方面分析了飞行器航迹规划的基本需求;对当前国内外航迹规划研究现状进行了阐述,从规划环境表示、约束条件处理、航迹的隐蔽性、算法的实时性、可替换航迹、多飞行器协调规划等方面指出了现有规划方法需要解决的问题;指明了飞行器航迹规划进一步的研究方向。     

动态环境中的飞行器实时三维航迹规划方法研究

本文提出了一种新的飞行器三维航迹规划方法－SDS。该方法能够在具有预先未知威胁的飞行环境中在线实时航迹规划。当飞行器上装备的探测器探测到飞行环境中有预先未知的威胁出现时，根据探测到的信息及时更新威胁数据。SDS根据新的环境信息局部修正受到影响的航迹段来获得新的全局最优航迹。在每一时刻考虑当前已知的信息下，SDS生成的航迹是满足要求的最优航迹。     

SIMULATION OF BLEED AIR BEHAVIOR DURING AIRCRAFT IN FLIGHT BASED ON FLOWMASTER

Bleed air system is one of the most important components of air management system(AMS).It acts as transfer pipes responsible for air supply at high temperature and pressure.The thermal and flow performance of the bleed air system is a key issue for the design of AMS since the characteristics of air source have a great influence on the anti-ice system,the environmental control system and other downstream system in need of high temperature pressurized air.Based on the one-dimensional lumped parameter technology,a computer analysis model of bleed air system is developed in order to analyze the thermal and flow behaviors of the nodal points in the pipeline network.The simulation are performed with a given flight assignment using the analysis model,and the results verify that the system meets the design requirements.     

Control system design of the Korean lunar lander demonstrator

In preparation for the lunar exploration program scheduled to be launched during the early 2020s in Korea, a lunar lander demonstrator, which will be used for developing and demonstrating lunar landing technologies, is being developed. The control configuration of the lunar lander demonstrator is determined with the consideration of available technologies and flight requirements. It is suggested that altitude control be achieved by clustering five 200 N monopropellant thrusters and attitude control with eight 3 N thrusters. A control algorithm designed to follow a predefined trajectory is developed using quaternion feedback. Control system configuration and control logic are verified by using computer simulations. Simulation results show that a soft landing with a touchdown velocity of less than 3 m/s is achieved. Attitude control performance is also verified using computer simulations. The developed control configuration will be further tested by hardware in the loop simulations and ground based firing tests during the next phase of the study.     

模糊控制在雷达天线控制系统中的应用

针对目前在雷达天线控制系统中采用数字PID控制存在超调量大、响应时间长等不足，分析比较了数字PID控制和模糊控制的不同特点，介绍了模糊控制在雷达天线控制系统中的应用。     

Random hysteresis PWM inverter with robust spectrum shaping

A hysteresis current-controlled pulsewidth modulation (PWM) scheme is simple and robust in switching control, but it is subject to not constant switching frequency. However, since its harmonic spectrum is not randomly distributed like those yielded by the random PWM (RPWM) scheme, the annoying harmonic effects still exist. A random switching control strategy is proposed here to let the harmonic spectrum of the hysteresis current-controlled PWM inverter be randomly distributed. First, the effect of varying band on the harmonic distribution characteristic of a hysteresis current-controlled PWM scheme is analyzed. Then a random hysteresis PWM scheme and its quantitative design procedure are proposed. Finally, a robust spectrum shaping technique is devised such that the desired harmonic distribution pattern can be achieved. In the resulting frequency spectrum, the magnitudes of lower frequency harmonics are shaped and reduced. Hence the inverter output with a better harmonic attribute is obtained. Validity of the proposed random hysteresis PWM scheme is verified by some simulated and measured results