气体燃料燃烧强化和污染控制的分析与探讨

本篇通过燃气燃烧特性的分析，指出了强化燃烧的措施，并通过燃气燃烧污染因素的分析，指出了污染控制的措施。     

对RLC串联电路中通频带与RLC参数关系的讨论——从一道习题引起的问题

讨论了RLC串联电路中通频带与RLC参数的关系,说明在设计一个RLC串联谐振电路时,在给定谐振频率,电感量和频带宽度时,上下边界频率不能只满足通频带宽度而任意假定,还应满足通频带与RLC这些参数之间关系的表达式.     

一种基于约束框架的棱柱网格生成方法

提出了一种基于约束框架的棱柱网格生成方法,即利用物面网格节点与背景结构框架网格之间的单一映射关系线性插值生成棱柱网格。背景结构框架网格基于TFI方法生成。物面网格节点与背景框架网格之间的映射关系通过一种线性投影方法建立。然后通过V型槽、圆球、M6机翼和F6翼身组合体四种不同外形对该棱柱网格生成方法进行了测试,测试结果表明该方法能够避免棱柱网格生成中的网格交叉现象,保证棱柱网格的成功生成。该方法在棱柱网格质量控制、棱柱网格局部修改等方面具有较好的效率和优势,但背景框架网格的生成依然是该方法的一个瓶颈,需要进一步的研究。     

Characteristics of pulsed plasma synthetic jet and its control effect on supersonic flow

The plasma synthetic jet is a novel flow control approach which is currently being studied. In this paper its characteristic and control effect on supersonic flow is investigated both experimentally and numerically. In the experiment, the formation of plasma synthetic jet and its propagation velocity in quiescent air are recorded and calculated with time resolved schlieren method. The jet velocity is up to 100 m/s and no remarkable difference has been found after changing discharge parameters. When applied in Mach 2 supersonic flow, an obvious shockwave can be observed. In the modeling of electrical heating, the arc domain is not defined as an initial condition with fixed temperature or pressure, but a source term with time-varying input power density, which is expected to better describe the influence of heating process. Velocity variation with different heating efficiencies is presented and discussed and a peak velocity of 850 m/s is achieved in still air with heating power density of 5.0 · 1012W/m3. For more details on the interaction between plasma synthetic jet and supersonic flow, the plasma synthetic jet induced shockwave and the disturbances in the boundary layer are numerically researched. All the results have demonstrated the control authority of plasma synthetic jet onto supersonic flow.     

Transfer element method with application to acoustic design of aeroengine nacelle

In the present survey, various methods for the acoustic design of aeroengine nacelle are first briefly introduced along with the comments on their advantages and disadvantages for practical application, and then detailed analysis and discussion focus on a kind of new method which is called ‘‘transfer element method'(TEM) with emphasis on its application in the following three problems: turbomachinery noise generations, sound transmission in ducts and radiation from the inlet and outlet of ducts, as well as the interaction between them. In the theoretical frame of the TEM, the solution of acoustic field in an infinite duct with stator sound source or liner is extended to that in a finite domain with all knows and unknowns on the interface plane, and the relevant acoustic field is solved by setting up matching equation. In addition, based on combining the TEM with the boundary element method(BEM) by establishing the pressure and its derivative continuum conditions on the inlet and outlet surface, the sound radiation from the inlet and outlet of ducts can also be investigated. Finally, the effects of various interactions between the sound source and acoustic treatment have been discussed in this survey. The numerical examples indicate that it is quite important to consider the effect of such interactions on sound attenuation during the acoustic design of aeroengine nacelle.     

Multi-objective evolutionary design of selective triple modular redundancy systems against SEUs

To improve the reliability of spaceborne electronic systems,a fault-tolerant strategy of selective triple modular redundancy(STMR)based on multi-objective optimization and evolvable hardware(EHW)against single-event upsets(SEUs)for circuits implemented on field programmable gate arrays(FPGAs)based on static random access memory(SRAM)is presented in this paper.Various topologies of circuit with the same functionality are evolved using EHW firstly.Then the SEU-sensitive gates of each circuit are identified using signal probabilities of all the lines in it,and each circuit is hardened against SEUs by selectively applying triple modular redundancy(TMR)to these SEU-sensitive gates.Afterward,each circuit hardened has been evaluated by SEU Simulation,and the multi-objective optimization technology is introduced to optimize the area overhead and the number of functional errors of all the circuits.The proposed fault-tolerant strategy is tested on four circuits from microelectronics center of North Carolina(MCNC)benchmark suite.The experimental results show that it can generate innovative trade-off solutions to compromise between hardware resource consumption and system reliability.The maximum savings in the area overhead of the STMR circuit over the full TMR design is 58%with the same SEU immunity.     

直升机应急漂浮系统传感器模块可靠性分析

直升机应急漂浮系统是直升机海上救生的主要装备之一,对其传感器模块进行可靠性分析,对保证直 升机应急漂浮系统安全运行、坠水过程中可靠触发至关重要。在充分了解非同型单元k/n(G)表决系统的基础 上,通过 Matlab/Simulink搭建不同逻辑关系下传感器模块的蒙特卡罗模拟平台,并进行相应模拟与理论计算。 结果表明:将蒙特卡罗模拟应用于传感器模块的可靠性分析具有一定的可行性与有效性;依据功能危险性分析 相应结论,并结合可靠性分析结果,该直升机应急漂浮系统传感器模块选择3/5表决系统最为合适。研究结果可为后续相似模块的逻辑关系选择与可靠性设计提供技术路线。     

折叠翼变体飞机的传动机构设计和驱动方式优化分析

变体飞机能够在飞行过程中显著地改变外形和尺寸,从而使单一的飞行器能够实现在起飞、俯冲、巡航等多种飞行状态下都具备优良的飞行性能.折叠翼变体飞机的折叠传动机构对折叠翼的结构动力学和传力特性具有显著的影响.本文设计了一种轴/轴套式的折叠传动机构,利用ANSYS有限元软件建立了有限元网格模型,采用DYNA求解器,详细求解分析...     

结构优化设计专家系统ESOPD的设计与应用

介绍了结构优化专家系统ESOPD的原理与应用,包括知识库的建立、推理机的选择、用户接口的设计等。对知识库中的知识作了重点介绍。