金属永磁材料的发展与研究现状

着重讨论了ＡｌＮｉＣｏ、Ｒ－Ｃｏ、Ｎｄ－Ｆｅ－Ｂ及Ｓｍ－Ｆｅ－Ｎ等金属永磁材料的发展与研究现状,对各种合金的性能与应用前景进行了评价。此外,简单介绍了ＦｅＣｒＣｏ、ＦｅＣｏＶ及ＭｎＡｌＣ永磁材料。并展望了磁性材料的未来发展趋势。     

弯头机动弹头再入螺旋弹道分析

针对弯头双锥机动弹头，采用内伏流牛顿方法和Euler方程数值方法计算气动力，并与六自由度弹道方程组耦合计算，分析了再入过程中的螺旋弹道特性以及滚转角速度和弹头几何参数等对螺旋弹道的影响，最后分析了利用控制质心横向运动来控制弹头滚转的方法。     

关于曲线检测的探讨

曲线测量一直是几何计量中的一个重点 ,本文阐述了已知曲线和未知曲线测量原理 ,利用 B样条拟合曲线 ,以及如何借助最小二乘对测量值 (二维 )进行最佳拟合和偏差处理     

“凹槽导流片式”机匣处理的结构尺寸优化研究

针对一种可提高压气机裕度而又不牺牲效率的新型处理机匣,进行了较为系统的几何尺寸优化研究。借助单级轴流压气机实验台,详细地研究了轴向叠合量、容腔尺寸及内置导流片数目对压气机性能的影响,归纳出若干该型处理机匣的设计准则,具有工程实用价值。     

高T_cBi－Pb－Sr－Cu－Ca－O系氧化物超导材料的Meissner效应和磁屏蔽效应

对高ＴｃＢｉ－Ｐｂ－ｓｒ－Ｃｕ－Ｃａ－Ｏ系氧化物超导材料的多晶块状、多晶粉末状和单晶等三种样品的Ｍｅｉｓｓｎｅｒ效应和磁屏蔽效应进行了仔细测量和分析．块状样品具有较强的磁屏蔽能力，在ＺＦＣ（Ｚｅｒｏ－ＦｉｅｌｄＣｏｏｌｅｄ）和ＦＣ（ＦｉｅｉｄＣｏｏｌｅｄ）两种过程中，超导体的体积比之差最大约１０％左右（μ０Ｈ≈２００Ｘ１０－４Ｔ）；粉末样品和单晶样品的磁屏蔽能力很小（７７Ｋ）．     

Process-scheme-driven N C machining cell for automatic construction of aircraft structural parts

In order to enhance the NC programming efficiency and quality of aircraft structural parts （ASPs）, an intelligent NC programming pattern driven by process schemes is presented. In this pattern, the NC machining cell is the minimal organizational structure in the technological process, consisting of an operation machining volume cell, and the type and parameters of the machining operation. After the machining cell construction, the final NC program can be easily obtained in a CAD/CAM system by instantiating the machining operation for each machining cell. Accordingly, how to automatically establish the machining cells is a key issue in intelligent NC program- ming. On the basis of the NC machining craft of ASP, the paper aims to make an in-depth research on this issue. Firstly, some new terms about the residual volume and the machinable volume are defined, and then, the technological process is modeled with a process scheme. Secondly, the approach to building the machining cells is introduced, in which real-time complement machining is mainly considered to avoid interference and overcutting. Thirdly, the implementing algorithm is designed and applied to the Intelligent NC Programming System of ASP. Finally, the developed algorithm is validated through two case studies.     

质子地磁垂直截止刚度在2004年11月7-8日两个时刻处的数值模拟

利用单粒子轨道理论, 在T04和IGRF2000磁场模式建立的磁层模型基础上, 应用四阶龙格库塔方法, 模拟计算宇宙线带电质子在地球磁层中的运动以及沿天顶方向入射到达地球磁场内的某一特定位置, 得到了距地球表面450km高度处全球质子垂直截止刚度在2004年11月7-8日中两个时刻的计算值. 根据计算得到的684个不同位置处的截止刚度值, 分析了同一时刻地磁垂直截止刚度随磁纬和磁经的变化. 与此同时, 模拟计算了相同时刻下磁纬为30°, 磁经为0°, 45°, 90°, 135°, 180°, 225°, 270°, 315°处, 地磁有效垂直截止刚度随高度的变化情况. 结果表明, 在磁纬30°处, 其质子有效垂直截止刚度随距离地心高度的变化沿向阳处向磁尾处方向, 变化越来越缓慢.     

Task allocation strategies for cooperative task planning of multi-autonomous satellite constellation

In recent years, the application of imaging satellites has entered a completely new stage, with the new demands such as rapid response to emergency events, observation of large-scale regional targets and multivariate data fusion, the multi-autonomous satellite constellation has been proposed. This paper first designs the structure of multi-autonomous satellite constellation, and a centralized-distributed structure is proposed. This structure could improve the dynamic response capacity of the whole constellation. Then, this paper adds adapted filtering mechanism to single autonomous satellite online scheduling algorithm to enhance its performance. This article also pays more attention on task allocation strategies of the master satellite in constellation, and ten different task allocation strategies based on five dimensions are analyzed by simulation experiments. At last, this paper extracts several characteristic features of the regular observation targets and designs a selector based on support vector machine (SVM). This selector could select an appropriate strategy according to the features of each experiment scenario.     

基于激光激励的火工冲击响应及其特性研究

针对传统火工冲击激励方法在频率范围方面的局限性，研究新兴的激光激励方式、激励特性及其参数的影响，探究模拟火工冲击试验的可行性。首先参考经典的冲击试验方法，制定了激光激励试验的试验方案，设计了试验装置并进行了冲击试验；然后针对火工冲击和激光激励的试验结果，在时域、频域进行了时频分析和响应谱分析与对比；最后依据该试验方法，讨论了激光脉冲频率和激光脉冲能量对冲击响应的影响。研究提出的激光激励方法对火工冲击机理研究与地面模拟试验设计具有一定的参考价值。