直升机滑油散热器动态性能分析

滑油散热器的动态特性是直升机滑油冷却系统设计的基础,使用模块化集总参数法建立了直升机滑油散热器的动态仿真模型,采用Laplace变换建立动态传递函数,结合动态仿真模拟曲线的比较以及传递函数的分析,对热侧和冷侧入口温度阶跃变化时的热侧出口温度动态响应性能进行分析,得到了影响动态性能的重要影响参数——芯体蓄热时间常数τw以及热侧温度随流动时间τ变化的时间常数hτ,从而可通过改变这两个重要影响参数来有效改变散热器以及系统的动态延迟时间.通过散热器动态实验测量,验证了模型的正确性.研究成果可有效改进散热器以及系统的动态性能,以及指导散热器与系统的优化耦合设计.     

Multi-frequency RCS Reduction Characteristics of Shape Stealth with MLFMA with Improved MMN

Three new control factors are presented for calculating the multipole mode number (MMN) efficiently and precisely. The effects of these control factors on the number of integral samples and the precision of multilevel fast multipole algorithm (MLFMA) are investigated. A new approach based on control factors which is proven to be able to improve the computational efficiency and reduce the needed memory significantly as well as ensuring the proper precision. For three aircraft models, the improved MLFMA is employed to analyze their multi-frequency scattering characteristics. It is found that aircraft shape can influence radar cross section (RCS) in different frequency zones. Both the multi-frequency RCS reduction characteristics of shape stealth aircraft and the conventional aircraft with stealth design taken into account are investigated, and the results show that shape stealth exhibits significant RCS reduction in the resonance and high-frequency zones, and with a weaker influence in the Rayleigh zone. Compared with radar absorbing material (RAM), shape stealth yields a wider multi-frequency RCS reduction. The above-mentioned results can be applied to stealth design for multiple frequencies or even for all frequencies.     

低速风洞绳牵引并联支撑系统的模型气动试验研究(英文)

根据绳牵引并联机构的优点,建造了一种新型的用于低速风洞试验的飞机模型绳牵引并联支撑系统,研究该系统中模型的空气动力参数的测量与计算方法。文中对机构进行了静力学分析,建立了描述实验模型气动载荷的数学模型,提出了通过测量绳系拉力求得模型空气动力参数的解算方法;设计并构建了绳系拉力测量及数据采集系统;将该系统置于开口式回流低速风洞中进行了吹风试验,采集了模型在不同姿态和不同风速下的各牵引绳的拉力数据,并对数据进行了处理分析,通过解算得到了不同吹风条件下模型的气动载荷参数曲线。研究结果表明,绳牵引并联机构用于低速风洞试验的支撑系统是可行的。     

Process-condition-driven Automatic Location of Components

In order to reduce the development cycle of mechanical products and corresponding toolings, a large number of components are utilized in these structures. Accordingly, automatic location method for components is a key issue in the research on intelligent computer aided design (CAD) techniques. Integrated with the investigation into intelligent design techniques for aircraft manufacturing toolings, in-depth researches on this issue are conducted. Formalized automatic location principles, representative methods and implementation algorithms are proposed and established. First, several terms and their formalized representative methods including process condition, location base and location operator are defined. Second, computation modeling of components automatic location and methods of location transformation are proposed. Then, definition of base structure and some key algorithms for automatic location are introduced. These principles and algorithms are developed, applied and verified in research project “Jig Intelligent CAD (JigICAD) System”.     

固体火箭发动机燃烧室外压稳定性

应用有限元软件开展了燃烧室外压稳定计算,以壳体表面环向应变为判据,从环向应变-载荷曲线保守估算了燃烧室外压失稳载荷。为了验证有限元计算模型,通过假药配方的调试,研制外压试验用模拟燃烧室,开展全尺寸模拟燃烧室外压试验,得到了燃烧室失稳载荷。通过计算与试验结果的比较分析,为有限元模型的修正提供了基础,采用推进剂的压缩模量进行燃烧室外压稳定性计算更接近实际情况。     

基于COTS的航空电子软件开发

介绍了商用货架产品(COTS)在航空电子软件开发中应用的优点和缺点,和基于COTS的航电软件构架;并给出了一个开发过程和部分开发工具。最后通过一个实例说明基于COTS的航电软件开发是实际可行的。     

太阳电池阵布局对微小卫星结构特性影响

通过对比某型号微小卫星两种体装式太阳电池阵布局及连接方式,从结构响应灵敏度的角度分析了结构的阻尼对整星顶板太阳敏感器测点加速度响应的影响程度。同时对两种方案整星的正弦振动试验结果对比分析,结果显示:减少侧板固定连接点且增加电池片数量的方案使其顶板部分测点响应超出了设备试验条件,且比初始设计方案测点的响应高出了27.1%,纵向和横向一阶频率均有不同程度的降低。因此,从结构特性的角度来看,初始设计方案更为合理。     

空间微小碎片撞击对太阳能电池性能影响

文章利用中国科学院空间科学与应用研究中心的等离子体驱动微小碎片加速器,进行了空间微小碎片累积撞击太阳能电池的模拟试验。之后,利用体式显微镜统计出太阳能电池表面的撞击坑,并测量了撞击前后太阳能电池的开路电压、短路电流、最大输出功率等参数的变化。试验结果与理论分析揭示了引起太阳能电池功率衰减的主要原因是碎片累积撞击导致的太阳能电池表面损伤。     

超高速撞击中的弹丸形状效应数值模拟研究

文章用AUTODYN仿真软件对球形、圆锥形、圆柱形和盘形4种不同形状弹丸超高速撞击Whipple防护结构所产生的碎片云形貌特征及对后墙的毁伤程度进行了数值仿真研究。对比分析结果指出:质量与速度相等的4种不同形状弹丸撞击缓冲屏所产生的碎片云有明显差异;弹丸长径比越小,穿过缓冲屏后的破碎程度越大;在5 km/s撞击速度下,球形弹丸对后墙的毁伤程度最小,而圆柱形弹丸的毁伤程度最大。这说明弹丸的形状对超高速撞击结果有显著影响,在航天器超高速撞击风险评估和防护工程设计中应充分考虑弹丸的形状效应。球形弹丸的弹道极限曲线在防护结构的碎片防护能力评价时存在高估的问题,在实际工作中要特别注意这一点。     

3DG111F等四种双极晶体管空间总剂量效应研究

3DG111F等4种双极晶体管在航天器驱动电子设备中有着重要的应用。研究和掌握空间辐射环境对这些器件产生的总剂量效应有助于了解单机总剂量效应。文章对3DG111F等4种双极晶体管进行了总剂量辐照试验、测量及试验结果分析。研究结果可为单机总剂量效应的分析提供试验依据。