月面钻取采样回转齿轮副啮合生热试验研究

针对月面钻取采样装置的回转齿轮副啮合热进行理论分析,依据辐射换热定律建立了理论温升模型;模拟实际月面真空、带载工况并开展试验研究。分析了啮合热在月面高真空环境的制约条件下,向机体外传播的方式、传热途径以及散发不畅时的积聚作用对附近运动副工作特性的影响。研究结果表明：回转齿轮副作为钻具驱动单元动力传递的中间环节,在20Nm负载转矩工况下持续运行40分钟,理论预测最大温升28.66℃,与试验测量的最大温升结果28℃相吻合,充分验证了钻进驱动单元热设计的正确性,准确地识别出回转齿轮副啮合热积聚的潜在风险。     

一种无人机旋翼设计方法

为了提高多旋翼无人机的航时,本文提出了一种无人机旋翼设计方法.该方法根据给定的爬升速度、旋翼转速、拉力、旋翼直径、桨叶数、翼型,能够计算出最大力效旋翼的几何特性,包括弦长分布、桨叶角分布.利用该方法设计了某型无人机的旋翼,得到了桨叶角和弦长沿径向的分布.制作了旋翼模型,并且开展了旋翼台架试验.在不同转速下,测量出拉力、...     

Research on failure criterion of composite based on unified macro- and micro-mechanical model

A new unified macro- and micro-mechanics failure analysis method for composite structures was developed in order to take the effects of composite micro structure into consideration. In this method, the macro stress distribution of composite structure was calculated by commercial finite element analysis software. According to the macro stress distribution, the damage point was searched and the micro-stress distribution was calculated by reformulated finite-volume direct averaging micromechanics (FVDAM), which was a multi-scale finite element method for composite. The micro structure failure modes were estimated with the failure strength of constituents. A unidirectional composite plate with a circular hole in the center under two kinds of loads was analyzed with the traditional macro-mechanical failure analysis method and the unified macro- and micro-mechanics failure analysis method. The results obtained by the two methods are consistent, which show this new method’s accuracy and efficiency.     

初级教练机综合航电系统发展趋势

分析和总结了综合航空电子系统的发展历史和现状,以及我国航电技术水平发展状态,阐述了当前初级教练机航电系统存在的问题。对国外军用初I中级教练机、国外民用轻型飞机和国产初级教练机现状进行了分析,论述了初级教练机综合航空电子系统的发展趋势。     

新型聚苯并噁嗪改性树脂的制备与性能

通过预聚反应制备了一种新型聚苯并噁嗪改性树脂.利用FTIR、GPC表征了改性树脂.利用旋转黏度计、DSC、DMA和TGA分别考察了树脂的流动性能、固化行为和改性树脂固化物的热性能.结果表明:制备的苯并噁嗪改性树脂在60～ 100℃,黏度小于500 mPa·s,恒温6h黏度不明显增大,具有良好的流动性能,适用于RTM成型工艺.改性树脂聚合温度较低,具有良好的固化工艺性.改性树脂固化物在氮气气氛下Td5在430℃以上,在900℃的残重高达73.71％,Ts为353.4℃,具有良好热性能.     

Prediction of transient responses of a folding wing during the morphing process

Accurate prediction of the structural dynamic characteristics of a folding wing during the morphing process is a prerequisite for performing transient aeroelastic analysis. In view of this fact, this paper develops a set of differential-algebraic equations that govern the time evolution of the folding wing during the morphing process by using the floating frame approach. Using the established equations of motion, the transient responses of the wing during the morphing process are computed. The developed equations can be further integrated with the CFD codes to carry out the transient aeroelastic analysis of the morphing wing.     

Investigation of longitudinal aerodynamic parameters identification method for fly-by-wire passenger airliners

The flight control system of a fly-by-wire （FBW） passenger airliner with a complex frame-work and high feedback gain augmentation would change the original characteristic of a loaded signal and suppress the excitation of an airplane＇s pertinent motion modes. Taking a research example of an FBW passenger airliner model with longitudinal relaxed-static-stability, a new method of signal type selection and signal parameter design is proposed, through analysis of signal energy distribution and plane body＇s frequency response. According to CCAR60--the Appraisal and Use Regulation of Flight Simulator Device, the simulation validation of the FBW passenger airliner＇s longitudinal aerodynamic parameters identification is put forward. The validation result indicates that the designed signal could excite the longitudinal motion mode of the FBW passenger airliner adequately and the multiparameter comparison in simulation meets the objective test request of CCAR60. Meanwhile, the relative errors of aerodynamic parameters are less than 10%.     

一种基于家用控制的Ad Hoc网络体系结构

借鉴现有的Ad Hoc网络协议,提出了一种基于家用设备控制应用的Ad Hoc网络体系结构。它最大的特点就是适合家庭应用中简便、易实现、低成本的要求。研究结果表明,它适合低速、平等、多跳的家用设备控制网络。     

自抗扰控制技术在转台频响伺服中的应用

在转台频响伺服中,针对低频和低速时干扰难补偿、高频时相位滞后和幅值衰减程度急剧恶化、常规控制策略严重依赖精确对象模型等难题,引入不依赖精确对象模型的自抗扰控制技术,并设计了控制系统.控制系统中,自抗扰控制器用来在线观测补偿干扰,前置处理单元用来补偿相位和幅值.控制系统应用到转台频响伺服中,实测得到的"双十"标准下最大跟踪频率和扫频频率都大于转台出厂时的验收指标.实测结果表明:自抗扰控制技术应用到转台频响伺服中可以有效提升转台的频响性能.     

基于小波变换的光纤周界定位系统

为提高基于双Mach-Zehnder干涉仪结构的光纤周界定位系统的定位精度,对信号频率范围及信噪比对系统定位精度的影响进行了理论分析和仿真研究.在此基础上,提出在选用光缆时需要兼顾对外界振动的敏感性和对外场复杂环境的适应性,以确保在长期可靠运行的前提下,扩展采集信号的频率范围;使用小波阈值降噪算法,提取振动信号的有效频率成分,滤除噪声,提高信噪比.最后进行了监测距离31 km的外场实验,验证了所选用光缆的优良性能和小波降噪算法的有效性.