Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

150kV/30kW逆变式电子束焊接高压电源设计

针对150kV/30kW电子束焊接高压电源高电压、大功率输出的要求,低压电路采用IGBT (Insulated Gate Bipolar Transistor)逆变隔离直流电源与逆变全桥串联的主电路拓扑,高压电路由3组升压变压器与10倍压整流电路的串联结构并联组成;设计了高压采样电路、束流采样电路,以及双闭环控制电路.基于上述技术,实现了150kV/30kW高电压大功率输出.实验结果表明高压加速电源的输出线性度和束流输出线性度较好,同时高压稳定度和束流稳定度均在0.5%左右,能够满足电子束焊接的要求.     

摄影测量技术及其在航天器变形测量中的应用

文章介绍了摄影测量技术的测量原理,系统调研了近年来摄影测量技术在国内外航天器变形测量领域的发展概况,分析总结了该技术的发展趋势和关键技术,并结合我国的具体国情提出了当前变形测量技术发展的建议,为我国在航天器大型复杂部件微变形测量技术的发展提供借鉴和参考。     

Dynamics and control of spacecraft hovering using the geomagnetic Lorentz force

To achieve hovering, a spacecraft thrusts continuously to induce an equilibrium state at a desired position. Due to the constraints on the quantity of propellant onboard, long-time hovering around low-Earth orbits (LEO) is hardly achievable using traditional chemical propulsion. The Lorentz force, acting on an electrostatically charged spacecraft as it moves through a planetary magnetic field, provides a new propellantless method for orbital maneuvers. This paper investigates the feasibility of using the induced Lorentz force as an auxiliary means of propulsion for spacecraft hovering. Assuming that the Earth’s magnetic field is a dipole that rotates with the Earth, a dynamical model that characterizes the relative motion of Lorentz spacecraft is derived to analyze the required open-loop control acceleration for hovering. Based on this dynamical model, we first present the hovering configurations that could achieve propellantless hovering and the corresponding required specific charge of a Lorentz spacecraft. For other configurations, optimal open-loop control laws that minimize the control energy consumption are designed. Likewise, the optimal trajectories of required specific charge and control acceleration are both presented. The effect of orbital inclination on the expenditure of control energy is also analyzed. Further, we also develop a closed-loop control approach for propellantless hovering. Numerical results prove the validity of proposed control methods for hovering and show that hovering around low-Earth orbits would be achievable if the required specific charge of a Lorentz spacecraft becomes feasible in the future. Typically, hovering radially several kilometers above a target in LEO requires specific charges on the order of 0.1 C/kg.     

基于球几何特征的摄像机内参分步标定方法

在摄像机标定过程中,球形靶标对图像数量、拍摄角度要求小,能够适应遮挡环境,在使用中具有明显优势.在分析球投影模型几何性质的基础上,提出一种利用球靶标分步标定摄像机内部参数的方法.该方法通过拍摄一幅包含空间中2个不同位置球体的图像,得到图像中的2条投影二次曲线;利用2条投影二次曲线的对称轴和公切线计算球心投影点,通过投影二次曲线的对称轴确定图像主点坐标,根据球心投影点和图像主点的位置关系求解归一化焦距;利用整体优化算法得到内参标定结果.仿真数据实验分析了引入测量误差的主要因素,实物标定结果与平面方格靶标方法相比误差在5%之内,重复测量结果稳定.      

火箭发动机气体-颗粒两相流双流体模型研究

探讨了两相流双流体模型中颗粒相压强、两相界面压强以及两相界面速度等若干关键问题,从理论上推导了双流体模型的控制方程,并讨论了颗粒相控制方程的双曲性.把LU隐式时间格式和Van-Leer矢通量分裂格式应用到两相流双流体模型中,并对一维等截面传热摩擦管道和轴对称JPL喷管中气固两相流进行了计算,计算结果与文献结果吻合良好,所建数学模型正确,所用数值计算方法可靠.     

压电自适应桁架结构主动控制模型及实验

为提高结构对外部环境的抗干扰能力,构造了压电柔性自适应桁架结构,并对其主动控制进行了研究.由传感器、作动器与柔性梁组成压电自适应桁架结构.基于自适应结构的机电耦合理论,在测量位移的情况下,采用改进的二次积分力反馈控制方法研究了空间压电柔性自适应桁架结构的振动主动控制问题.建立了压电柔性自适应桁架结构主动控制实验系统,并对这类自适应结构进行了实时计算机振动主动控制实验研究.实验研究表明柔性自适应桁架结构能够改善结构的动力学特性,对外界的干扰具有良好的自适应性.     

轴向通流旋转盘腔内流动不稳定性研究

为了研究旋转腔内流动不稳定性问题,采用旋转坐标系稳态方程,用数值模拟的方法分析了轴向通流旋转盘腔内的流动,得到了旋转系下哥氏力和离心浮升力分别对流动不稳定的作用,以及这两个力的非线性综合作用对流动不稳定的影响.结果表明:哥氏力是恢复力,不影响流动稳定性;离心浮升力是造成流动不稳定的主要因素,盘腔内的流动是离心力场下的Rayleigh-Benard对流和强迫对流的混合流,随着浮升力的增强流动由稳态发展为非稳态;哥氏力与离心浮升力的综合作用加剧了流动不稳定性,盘腔内r-θ面出现了明显的旋向相反的对涡.     

某单缸柴油机表面辐射噪声源试验分析与改进

针对某单缸柴油机表面辐射噪声过大,整机声功率级超标的问题,采用9点声功率法与近场声压扫描阵面法相结合的识别方法,进行了柴油机主要表面辐射噪声源识别的试验分析,发现齿轮室盖、油底壳、水油箱是单缸柴油机主要表面噪声源的主要辐射部件。通过采用频谱分析方法,进一步研究了主要辐射部件振动特性与表面噪声辐射特性之间的关系。在此基础上,设计了一种具有高插入损失的紧贴式齿轮室盖隔声结构、选择了具有高阻尼特性的复合阻尼钢板油底壳、选取了新型尼龙合金复合材料制造的水油箱来降低单缸柴油机的表面辐射噪声。综合以上各种降噪方法,使得单缸柴油机整机噪声水平降低了1.5dB(A),优于国家标准要求。     

空乘大学生心理健康现状调查与对策分析

心理健康对于学生的成长成才具有至关重要的作用。文章针对飞行学院2009级和2010级空乘专业学生进行了心理健康现状调查,分析了目前学院学生的心理健康整体水平和成长需求,为学院在制订学生心理健康培养对策时提供理论参考。