华东地区围护结构节能研究

根据南京市的典型年逐时气象参数，对于该市的某一座高层建筑物，应用自编的逐时动态负荷模拟程序，输入围护结构（窗户、墙体和屋顶）相关的物理参数及其与周围环境的关系（地点及朝向等），计算围护结构冬季采暖期散热量及夏季制冷得热量。结果表明，采用双层塑窗代替单层塑窗，使用节能墙体代替传统墙体能够使得冬季围护结构传散热量减少51％，夏季围护结构总得热量减少46％。因此，这一结果为华东地区建筑节能技术提供了理论依据。     

金属载体上线天线阻抗与辐射特性的矩量法研究

用线网格模拟金属载体表面，应用矩量法求出天线及载体网格上的电流分布，据此研究在该金属载体影响下的天线特性，在计算阻抗矩阵元素时，利用了非对称正弦偶极子辐射场的精确表达式，并采用了直接复数积分，简化了计算公式，本文给出了几种金属载体上线天线的阻抗与辐射特性的计算结果，它们与有关文献上的数据或实验结果一致，最后计算了一种舰船简单模型上两根线天线的远区辐射场及它们的自阻抗与互阻抗。     

基于BP网络的热工过程模型辨识方法

主要研究了人工神经网络在辨识火电厂热工过程模型中的应用，利用Visual C^ 语言构造BP神经网络,提出了把BP网络权值转换为传递函数的方法，针对火电厂常见的热工过程，不用人为加入特殊的激励信号，只利用现场生产中自然存在的扰动信号进行辨识试验，试验结果准确可靠。     

相位法曲面三维可测梯度极限的研究

简述了相位法曲面三维全场无接触检测的基本原理，研究了被测曲面的梯度变化对频谱分析和滤波处理的影响，推导出相位法曲面可测梯度极限的理论公式，并通过锥面测量验证了这一公式的正确性。     

危害性分析中的模糊数学方法

利用模糊集合理论对影响故障模式危害性的各因素进行了模糊化处理，建立了故障模式危害性评定的模糊评判模型，并阐述了模糊评判方法的基本步骤。     

支持MEMS的CAD/CAE系统结构研究

CAD/CAE技术在MEMS(Micro Electro Mechanical Systems)研究过程中具有非常重要的作用.本文首先介绍了用于MEMS的CAD/CAE技术特点,然后研究了MEMS CAD/CAE系统结构,给出了软件支持工具结构框图,指明了解决其中关键技术的途径.CAD/CAE技术的应用,将提高微型机电系统的设计质量,缩短研制周期,使之及早走向工业化.     

Crystal orientation and morphology of a lamellae in wrought titanium alloys: On the role of microstructure evolution in b processing

To obtain high-quality aviation forgings of titanium alloys, b forging is an essential processing step which must be considered throughout a production process. In this work, the effect of b forging on the crystal orientation and morphology of lamellar a was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during b working resulted in the formation of low-angle grain boundary(LAGBb) inside b grains. The lamellar a can penetrate through the LAGBb, leading to similar intra a LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed.A continuous change of the b orientation in diffusive boundaries results in the formation of fine and disordered a lamellae without intra-lamellar boundary to hold the Burgers orientation relationship(OR). On sharp boundaries, it is prone to producing continuous grain boundary a(aGB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary a for a smoother orientation change on the b grain boundary.     

RTK model and positioning performance analysis using Galileo four-frequency observations

This paper proposes a real-time kinematic (RTK) model that uses one common reference satellite for the Galileo system with four frequency observations. In the proposed model, the double-differenced (DD) pseudorange and carrier phase biases among the different frequencies are estimated as unknown parameters to recover the integer features of the DD ambiguities among the different frequencies for ambiguity resolution and precise positioning. Analysis results show that the E5a, E5b, and E5 frequencies have virtually the same performance in terms of the positioning accuracy, observation residuals, and ratio values of ambiguity resolution. However, the E1 frequency performs worse than the E5a, E5b, and E5 frequencies. The RTK results for the combination of multiple frequencies are much better than those for a single-frequency observation, the coordinates’ standard deviation is improved about 20–30%, and the ambiguity fix time is improved about 10%.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

工业园区配套住房的成本分担机制——以东北某市谋划的“廉租家户式公寓”为例

农业转移人口市民化成本是新型城镇化推进的主要障碍,其中住房成本占有较大的份额。工业园区是农业转移人口的就业集聚区,现有的保障性住房供给体系并未将农民工全面纳入,尚未充分考虑农业转移人口的临时性居住问题。东北某市运用成本分担机制谋划的"廉租家户式公寓"项目,实现了农业转移人口短期居住的"优区位、高品质、全配套、低租金",形成了政府、企业、个人三方积极参与、合作共赢的格局。该模式的核心要义在于政府的克己惠民,或将成为工业园区周边配套住房供给的可推广模式。