一种微波等离子体原子氧模拟装置

介绍了一种新颖的原子氧模拟试验装置。该装置采用了微波电子回旋共振（ｅｌｅｃｔｒｏｎｃｙｃｌｏｔｒｏｎｒｅｓｏｎａｎｃｅ简称“ＥＣＲ”）的先进技术。最佳调试状态下，可获得１０（１５）／（ｃｍ２·ｓ）的束流。在该试验装置上，对航天器上常用的Ｋａｐｔｏｎ和石墨环氧材料进行了原子氧效应试验，首次在国内成功的获得了原子氧束流模拟试验的样品结果。对样品的表面形貌分析证明：试验结果完全与国外同类设备的试验结论一致，这标志着中国在原子氧地面模拟技术领域的研究已取得重要进展。     

磁层亚暴膨胀相的近地触发模型

本文指出现有亚暴的中性线模型其源区在赤疲乏面上离地球太远；以ＧＥＯＳ－２的观测资料为依据，提出了亚暴膨胀相的一个近地触发模型－气球模不稳定性模型，该模型认为，在增长相期间到达Ｒ≈（６－１０）ＲＥ的近地等离子体片内边缘区，出现指向地球方向的离子压强梯度，越尾电流强度增大，磁力线向磁尾拉伸。当等离子体片变薄，电子沉降增强，极光带电离层电导率骤增时，气球模不稳定性在近地等离子体片内边缘区被激发，场向电流     

Charged-particle mutagenesis II. Mutagenic effects of high energy charged particles in normal human fibroblasts.

The biological effects of high LET charged particles are a subject of great concern with regard to the prediction of radiation risk in space. In this report, mutagenic effects of high LET charged particles are quantitatively measured using primary cultures of human skin fibroblasts, and the spectrum of induced mutations are analyzed. The LET of the charged particles ranged from 25 KeV/micrometer to 975 KeV/micrometer with particle energy (on the cells) between 94-603 MeV/u. The X-chromosome linked hypoxanthine guanine phosphoribosyl transferase (hprt) locus was used as the target gene. Exposure to these high LET charged particles resulted in exponential survival curves; whereas, mutation induction was fitted by a linear model. The Relative Biological Effect (RBE) for cell-killing ranged from 3.73 to 1.25, while that for mutant induction ranged from 5.74 to 0.48. Maximum RBE values were obtained at the LET of 150 keV/micrometer. The inactivation cross-section (alpha i) and the action cross-section for mutant induction (alpha m) ranged from 2.2 to 92.0 micrometer2 and 0.09 to 5.56 x 10(-3) micrometer2, respectively. The maximum values were obtained by 56Fe with an LET of 200 keV/micrometer. The mutagenicity (alpha m/alpha i) ranged from 2.05 to 7.99 x 10(-5) with the maximum value at 150 keV/micrometer. Furthermore, molecular analysis of mutants induced by charged particles indicates that higher LET beams are more likely to cause larger deletions in the hprt locus.     

Ada软件的动态测试技术研究

为改善软件质量，对Ａｄａ软件的动态测试技术进行了研究，并且就以下内容着重进行了讨论；Ａｄａ软件的分析与理解；Ａｄａ软件的动态测试原则与方法；Ａｄａ软件的动态测试工具ＡＳＤＴ。     

冗余度机器人力控制的运动学稳定性分析

把非冗余度机器人位置／力混合控制方案引入到冗余度机器人，用线性化的动力学模型对其运动学稳定性进行分析，提出一种改进的基于运动学稳定的冗余度机器人混合控制策略。仿真研究结果证明了所提出方法的有效性。     

单片机控制无刷直流电动机速度伺服系统

介绍了一种稀土永磁无刷直流方波电动机速度伺服系统，该系统以８０９８单片机为核心，外加ＧＡＬ芯片构成控制器，主回路开关器件采用ＩＧＢＴ，用ＥＸＢ８４０驱动，组成功率变换电路，实现了ＰＷＭ波单极半调制方式的电机伺服控制。     

卫星通信的产业化

回顾了中国发展卫星通信的简要历史，介绍了中国卫星通信的现状和作用。在调查国内用户需求的基础上，预测了１９８８－２００２年国内用户对卫星通信转发器需要的数量。     

亚、超音速机翼非定常广义气动力系数之间的关系

 <正> 研究弹性飞机的动力学特性应计及非定常广义气动力。为了尽可能保留非定常运动历程,应首先计算由阶跃函数形式下洗产生的非定常气动力函数(指示函数或指数函数),再利用卷积形式的迭加原理处理任意函数形式下洗产生的非定常气动力。用振型法建立飞机弹性运动方程,可将飞机上任一质点的弹性位移近似地表示为     

电子束表面造型对液冷冷板散热性能影响研究

为了获得电子束表面造型对液冷冷板散热性能的影响规律,对带有柱状表面造型的液冷冷板进行数值模拟。结果表明,当冷却液通道中存在柱状表面造型时,可有效提高冷板的散热性能,其中造型高度对冷板的散热性能影响最大,造型流向间距的影响其次,造型直径的影响最小;当柱状造型直径1mm、高度6mm且相邻造型的流向间距为4mm时,冷却液与模拟发热芯片的温差为46.08℃,该冷板的散热性能与空白试样对比可提升23.23%。之后根据模拟结果,制备了具有不同表面造型特征的液冷冷板试样,散热性能测试结果表明,通道内制备柱状造型可提高冷板散热性能达13%以上;但当柱状造型高度4mm,且造型数量较少时,改变柱状造型特征对提升冷板散热性能的影响较小。     

Low-latitude storm time ionospheric predictions using support vector machines

The electromagnetic drift plays an important role in low-latitude storm time ionospheric dynamics. In this study we attempt to utilize the electric field data into ionospheric predictions by using support vector machine (SVM), a promising algorithm for small-sample nonlinear regressions. Taking the disturbance electric field data as input, different SVMs have been trained for three seasonal bins at two stations near the north crest of the Equatorial Ionization Anomaly (EIA). Eighteen storm events are used to check out their predicting abilities. The results show fairly good agreement between the predictions and observations. Compared with STORM, a widely used empirical correlation model, the SVM method brings a relative improvement of 23% for these testing events. Based on this study we argue that the SVM method can improve the storm time ionospheric predictions.