纯模态试验中的作动器/传感器优化配置

基于有效独立法,研究了逐步消减法在纯模态试验作动器/传感器优化配置中的应用。对一给定自由度的结构系统,由系统的模态动能可得系统的F isher信息阵。在优化过程中,根据F isher信息阵可得到各自由度节点所对应的E fI值,由E fI值的大小来确定每次要删除的作动器/传感器。在逐步消减的过程中,把E fI的值表示为一个矩阵的形式,使得优化过程清晰明了,提高了优化效率。最后,通过对一个20自由度的离散悬臂梁的激振器布设进行优化,验证了本文方法的有效性。     

网格环境下基于移动代理的两级环调度模型

网格环境下基于移动代理的两级环调度模型主要由网格任务管理中心、网格资源节点、网格用户、用户作业组成。网格任务管理中心依据网格用户提交的作业动态生成两级环,即超级环和普通环。两级环中资源节点由超级环管理节点、普通环管理节点和普通环资源节点构成。不同节点充分利用移动代理的自主迁移能力共同维护任务的正常运行。通过对两级环模型的事件响应时间延迟、系统可靠性、负载平衡、作业运行时间的分析和仿真,证实该模型能够有效利用网格计算资源、均衡资源负载。     

用推力矢量控制技术改进超声速飞行器空气动力特性

为了提高某超声速飞机的空气动力学效率和机动性能,本文采用低阶的三维板块法和DATCOM半经验公式,在亚声速和超声速条件下,对不同马赫数和迎角情况计算了基本气动外形的飞机空气动力学特性、表面压力分布以及最大升力。此外还开发了一套软件以实现由引进的先进气动操纵面（如鸭翼等）控制的二维推力矢量技术。试验结果表明：气动操纵面结合推力矢量技术能够产生足够的低头力矩,且有能力满足高度机动飞行时的稳定性要求。此外,不论是亚声速还是超声速飞行,气动操纵面均可以提高气动效率5％-6％。     

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。     

Comparison of convergence time and positioning accuracy among BDS,GPS and BDS/GPS precise point positioning with ambiguity resolution

Precise point positioning (PPP) usually takes about 30?min to obtain centimetre-level accuracy, which greatly limits its application. To address the drawbacks of convergence speed and positioning accuracy, we develop a PPP model with integrated GPS and BDS observations. Based on the method, stations with global coverage are selected to estimate the fractional cycle bias (FCB) of GPS and BDS. The short-term and long-term time series of wide-lane (WL) FCB, and the single day change of narrow-lane (NL) FCB are analysed. It is found that the range of GPS and BDS non-GEO (IGSO and MEO) WL FCB is stable at up to a 30-day-time frame. At times frame of up to 60?days, the stability is reduced a lot. Whether for short-term or long-term, the changes in the BDS GEO WL FCB are large. Moreover, BDS FCB sometimes undergoes a sudden jump. Besides, 17 and 10 stations were used respectively to investigate the convergence speed and positioning errors with six strategies: BDS ambiguity-float PPP (Bfloat), GPS ambiguity-float PPP (Gfloat), BDS/GPS ambiguity-float PPP (BGfloat), BDS ambiguity-fixed PPP (Bfix), GPS ambiguity-fixed (Gfix), and BDS/GPS ambiguity-fixed (BGfix). The average convergence speed of the ambiguity-fixed solution is greatly improved compared with the ambiguity-float solution. In terms of the average convergence time, the Bfloat is the longest and the BGfix is the shortest among these six strategies. Whether for ambiguity-float PPP or ambiguity-fixed PPP, the convergence reduction time in three directions for the combined system is the largest compared with the single BDS. The average RMS value of the Bfix in three directions (easting (E), northing (N), and up (U)) are 2.0?cm, 1.5?cm, and 5.9?cm respectively, while those of the Gfix are 0.8?cm, 0.5?cm, and 1.7?cm. Compared with single system, the BDS/GPS combined ambiguity-fixed system (BGfix) has the fastest convergence speed and the highest accuracy, with average RMS as 0.7?cm, 0.5?cm, and 1.9?cm for the E, N, U components, respectively.     

基于微课的材料成型及控制工程专业英语翻转课堂教学实践与探索

微课不是指用于微学习的微内容,而是指使用专业软件构建便于在线和移动学习的实际教学内容。笔者结合教学实践,利用iSpring Suite软件制作微课,开展对材料成型专业英语的教学研究,并进一步探索基于微课的翻转课堂教学模式。