Nondestructive Characterization of RBSOA of High-Power Bipolar Transistors

Reverse-bias safe operating area (RBSOA) of high-power Darlington transistors is characterized using a 120 A/1000 V nondestructive reverse-bias second breakdown tester designed and fabricated at Virginia Polytechnic Institute and State University. Elaborate RBSOA characteristics are generated with different forward/reverse base drives and collector current levels. The effects of elevated case temperature and second-base drive on RBSOA of four-terminal Darlington devices are also discussed.     

A Detection Algorithm for Optical Targets in Clutter

There is active interest in the development of algorithms for detecting weak stationary optical and IR targets in a heavy opticalclutter background. Often only poor detectability of low signal-to-noise ratio (SNR) targets is achieved when the direct correlation method is used. In many cases, this is partly obviated by using detection with correlated reference scenes [1, 2].This paper uses the experimentally justified assumption that most optical clutter can be modeled as a whitened Gaussian randomprocess with a rapidly space-varying mean and a more slowlyvarying covariance [2]. With this assumption, a new constant falsealarm rate (CFAR) detector is developed as an application of the classical generalized maximum likelihood ratio test of Neyman and Pearson. The final CFAR test is a dimensionless ratio. This test exhibits the desirable property that its probability of a false alarm(PFA) is independent of the covariance matrix of the actual noiseencountered. When the underlying noise processes are complex intime, similar considerations can yield a sidelobe canceler CFARdetection criterion for radar and communications. Performance analyses based on the probability of detection (PD)versus signal-to-noise ratio for several given fixed false alarm probabilities are presented. Finally these performance curves are validated by computer simulations of the detection process which use real image data with artificially implanted signals.     

DO 28飞行试验数据一致性检验

 本文研究DO28试验机飞行试验数据一致性检验及其误差校正。建立了由非线性运动学方程及内容广泛的校正环节构成的一致性检验模型,解决了大地风场重构、测量信号时间延迟估计、ψ转换及测量控制信号的校正。为DO28参数估计提供了可靠、准确的飞行试验数据。     

环向圈连带冠叶片的动态分析

 本文将动态子结构方法中链式加载技术与群论算法相结合,提出环向固连带冠叶片动力特性分析的一种新方法。文中列出了分析步骤与具体公式,并有实例的计算结果。该方方法适用于研究具有带冠叶片的单级转子中,“冠”的整体效应。     

多径衰落条件下两种常规测向方法的误差问题

讨论了莱斯多径衰落信道模型在两类常规测向技术中的应用。利用常规测向技术对信噪比的特定要求,分析了具有莱斯分布特性衰落信道对比相、比幅测向误差抖动的影响,给出了其分布函数,并通过仿真指出其应用限制。最后就工程应用中所关心的模型参数获取和采样点数确定等问题作一论述。     

用欧拉方程计算机翼与翼身组合体绕流

本文用保角转绘加剪切变换生成三维机翼与翼身组合体Ｃ－Ｈ型网格，并在这类网格拓扑上，用有限体积法研制出可供分析机翼与翼身组合体绕流的三维欧拉方程计算程序。本方法的特色是改进了机翼表面网格点的分布，使机翼后缘与网格线一致；采用了当量机身，使机岙表面到对称面光滑过渡；嵌入了边界层粘性修正。改善了计算结果。数值计算表明，对粘性影响较大的超临界绕流，边界层修正效果显著。     

SRM 纤维缠绕壳体的蒙特卡罗随机有限元分析

采用蒙特卡罗随机有限元方法，结合复合材料壳体力学、纤维缠绕理论等知识，分析了固体火箭发动机纤维缠绕壳体在燃气内压随机变化作用下的应力响应，绘出应力分布曲线，为固体火箭发动机结构可靠性评估奠定基础。     

湍流型动态畸变下涡喷发动机稳定性分析

对湍流型动态畸变进气流场进行了分析和描述，给出了随机涡在压气机进口所产生的总压脉动的通用分布曲线，并统计地分析和预测了该总压脉动引起的最可能最大失速裕度损失。数值分析表明在考虑压气机对非定常流响应方面，最为关心的压气机最大失速裕度损失值是脉动压力的均方根值、功率谱密度、压气机进口转子弦长和转速的函数。     

室温贮存对树脂粘度和加压点的影响

讨论了５４０５改性双马来酰亚胺树脂基体在室温下，贮存时间对粘度以及对固化过程中加压点的影响，给出了相应的计算方法。     

仿真与响应曲面法的结合及其在综合生产计划中的应用

 论述响应曲面法与仿真相结合的优化结构,着重讨论了一阶和二阶响应曲面的仿真拟合原理和寻优过程,从而可在仿真环境下给出最优决策参数。利用所开发的GASPRSM仿真优化软件,对飞机工厂生产计划安排进行了仿真运行,证明可以取得显著的经济效果。