A theoretical model of semi-elliptic surface crack growth

A theoretical model of semi-elliptic surface crack growth based on the low cycle strain damage accumulation near the crack tip along the cracking direction and the Newman–Raju formula is developed. The crack is regarded as a sharp notch with a small curvature radius and the process zone is assumed to be the size of cyclic plastic zone. The modified Hutchinson, Rice and Rosengren(HRR) formulations are used in the presented study. Assuming that the shape of surface crack front is controlled by two critical points: the deepest point and the surface point.The theoretical model is applied to semi-elliptic surface cracked Al 7075-T6 alloy plate under cyclic loading, and five different initial crack shapes are discussed in present study. Good agreement between experimental and theoretical results is obtained.     

一种组合体航天器帆板的光照遮挡计算新方法

提出了一种新的太阳帆板遮挡计算方法,用于组合体航天器的能量平衡分析与计算。根据航天器轴线与帆板转轴垂直的几何关系,将其沿轴线离散化为若干平面的集合,将所分析的帆板离散化为点集,判断离散点沿太阳矢量逆向是否经过离散的舱体平面或其它帆板平面,以此确定遮挡关系。通过仿真计算得到不同入射太阳方向下某组合体对应的遮挡区域,结果表明,新方法适用于轴对称形状组合体航天器的帆板遮挡分析。     

Performance improvement for constellation SAR using signal processing techniques

A new concept of spaceborne synthetic aperture radar (SAR) implementation has recently been proposed - the constellation of small spaceborne SAR systems. In this implementation, several formation-flying small satellites cooperate to perform multiple space missions. We investigate the possibility to produce high-resolution wide-area SAR images and fine ground moving-target indicator (GMTI) performance with constellation of small spaceborne SAR systems. In particular, we focus on the problems introduced by this particular SAR system, such as Doppler ambiguities, high sparseness of the satellite array, and array element errors. A space-time adaptive processing (STAP) approach combined with conventional SAR imaging algorithms is proposed which can solve these problems to some extent. The main idea of the approach is to use a STAP-based method to properly overcome the aliasing effect caused by the lower pulse-repetition frequency (PRF) and thereby retrieve the unambiguous azimuth wide (full) spectrum signals from the received echoes. Following this operation, conventional SAR data processing tools can be applied to focus the SAR images fully. The proposed approach can simultaneously achieve both high-resolution SAR mapping of wide ground scenes and GMTI with high efficiency. To obtain array element errors, an array auto-calibration technique is proposed to estimate them based on the angular and Doppler ambiguity analysis of the clutter echo. The optimizing of satellite formations is also analyzed, and a platform velocity/PRF criterion for array configurations is presented. An approach is given to make it possible that almost any given sparse array configuration can satisfy the criterion by slightly adjusting the PRF. Simulated results are presented to verify the effectiveness of the proposed approaches.     

莲花湖曲径尽头的深幽

眼前的折多山让人无法忍受，海拔4280米的垭口淹没在汽车尾气和鼎沸人声之中。有人在攀援佛塔，有人在抓扯风马旗，雪坡上满是豪气干云的征服者嘴脸．著名的康藏第一关正以它汉藏界山的博大胸怀接纳无知游人．没办浩．今天是伟大的五月一日，山洪般的旅游大潮从城市席卷而至，湮没郊野，淫没乡镇，湮没崇山峻岭，所及之处皆为沼国．     

关于对住宅基本要求的讨论

良好的居信环境不仅有利于身心健康，而且，对人类大脑智力的发育和发展提供了优良条件，现代科学研究表明：良好的环境可使人类大脑的思维效果提高15－35％。     

基于开路电压法的电池荷电状态估计误差校正

本文提出分别研究电池开路电压在充电结束后停置过程和放电结束后停置过程的不同变化规律,并考虑了不同停置时间在两个过程中的作用和影响,从而达到提高开路电压法估算荷电状态精度的效果。实验验证表明,此方法的精度比传统开路电压法更加准确。     

歼击机纵向多模态控制规律设计方法初探

一、问题的提出 多模态控制规律在现代飞行控制系统中得到广泛应用。由于采用多控制面控制飞机的机动运动,仅仅采用仿真的方法来选择控制律的参数是很困难的。在此,我们对AFTI/F-16飞机多模态飞行控制规律按已知控制律结构及基本设计思想进行设计,探索其主要通道的基本功能及参数选择方法,以便对其系统设计方法进行深入探讨和分析。     

关于加强高校网络思想政治教育的理论探讨

网络信息技术的快速发展,为高校思想政治工作提供了新的手段,极大地拓展了思想政治工作的空间和渠道。思想政治教育工作者有必要深入研究学生思想活动的新情况、新特点,充分发挥网络信息技术的优势,创新思想政治工作的方法、形式和手段,进而完善高校思想政治工作体制。     

多重网格法求解二元跨音速欧拉流

 近年来,采用时间相关欧拉方程或N-S方程求解跨音速流得到了迅速发展。为了获得二元或三元复杂形体正确的表面气动参数和足够高分辨率的流场物理特性,必须采用十分细密的网格,因而导致计算时间成倍增长。为此,除继续发展各种差分格式,探讨各种自适应网格技术外,运用多重网格技术加速收敛过程得到了国外普遍关注并取得了一定的成功。国内也已有采用多重网格法解跨音速欧拉流的文章,然而均局限于两重网格的计算。为探索多重网格法和焓阻尼技术对加速收敛的作用,我们以NACA0012翼型的跨音速流动为例,采用MacCormack两步显式格式进行了数值实验。     

叠层穿刺CF/Al复合材料准静态拉伸力学行为与失效机制

针对新型的叠层穿刺碳纤维织物增强铝基复合材料（CF/Al复合材料）,通过细观力学数值模拟与实验结合的方法研究了其在准静态拉伸载荷作用下的渐进损伤与断裂力学行为。复合材料经向拉伸弹性模量、极限强度与断裂应变的实验结果分别为129.61 GPa、630.14 MPa和0.75%,细观力学模型预测误差分别为-9.41%、7.57%和1.33%,均匀化计算的宏观应力-应变曲线与实验曲线总体上相符。经向拉伸变形初期首先出现经/纬纱交织处基体合金的局部损伤,随着拉伸应变量的增大依次发生纬纱和穿刺纱的横向开裂,拉伸变形后期基体合金与经纱失效引起宏观应力-应变曲线的急剧下降,复合材料拉伸断口表现为经纱轴向断裂及纬纱和穿刺纱横向开裂共存的形貌特征,纤维拔出和基体断裂导致的经纱轴向断裂是诱发复合材料最终失效的主要机制。