Analytical and numerical approaches of a solar array thermal analysis in a low-earth orbit satellite

This paper researches the thermal analysis of a fixed-type solar array in a low-earth orbit satellite through both an analytical method with a simplified thermal model and a numerical method with a detailed thermal model.     

Medium resolution near-infrared spectra of the host galaxies of nearby quasars

We present medium resolution near-infrared host galaxy spectra of low redshift quasars, PG 0844+349$0844+349$ (z = 0.064), PG 1226+023$1226+023$ (z = 0.158), and PG 1426+015$1426+015$ (z = 0.086). The observations were done by using the Infrared Camera and Spectrograph (IRCS) at the Subaru 8.2 m telescope. The full width at half maximum of the point spread function was about 0.3 arcsec by operations of an adaptive optics system, which can effectively resolve the quasar spectra from the host galaxy spectra. We spent up to several hours per target and developed data reduction methods to reduce the systematic noises of the telluric emissions and absorptions. From the obtained spectra, we identified absorption features of Mg I (1.503 μm), Si I (1.589 μm) and CO (6-3) (1.619 μm), and measured the velocity dispersions of PG 0844+349$0844+349$ to be 132 ± 110 km s⁻¹ and PG 1426+015$1426+015$ to be 264 ± 215 km s⁻¹. By using an _MBH–σ$M_{\text{BH}}''–''\sigma$ relation of elliptical galaxies, we derived the black hole (BH) mass of PG 0844+349$0844+349$, log(_MBH/_M⊙)=7.7±5.5$\log (M_{\text{BH}}/M_{\odot })=7.7\pm 5.5$ and PG 1426+015,log(_MBH/_M⊙)=9.0±7.5$1426+015\text{,}\log (M_{\text{BH}}/M_{\odot })=9.0\pm 7.5$. These values are consistent with the BH mass values from broad emission lines with an assumption of a virial factor of 5.5.     

Experimental and numerical investigation of threedimensional vortex structures of a pitching airfoil at a transitional Reynolds number

This research examines the vortex behaviors and aerodynamic forces in dynamic stall phenomena at a transitional Reynolds number(Re = 90000) using experimental and numerical approaches.Periodic sinusoidal pitching motion at two different reduced frequencies is used to achieve the dynamic stall of a NACA 0012 airfoil.Several leading edge vortices form and detach in the dynamic stall stage.The flow then quickly transitions to a full separation zone in the stall stage when the angle of attack starts to decrease.There is discrepancy between the phaseaveraged and instantaneous flow field in that the small flow structures increased with angle of attack, which is a characteristic of the flow field at the transitional Reynolds number.The interaction between the streamwise vortices in the three-dimensional numerical results and the leading edge vortex are the main contribution to the turbulent flow.In addition, the leading edge vortex that supplies vortex lift is more stable at higher reduced frequency, which decreases the lift fluctuation in the dynamic stall stage.The leading edge vortex at higher reduced frequency is strong enough to stabilize the flow, even when the airfoil is in the down-stroke phase.     

Effects of coarse riblets on air flow structures over a slender delta wing using particle image velocimetry

This research investigates the aerodynamic performance and flow characteristics of a delta wing with 65° sweep angle and with coarse axial riblets,and then compares with that of a smooth-surface delta wing.Particle Image Velocimetry(PIV)were utilized to visualize the flow over the wing at 6 cross-sections upright to the wing surface and parallel to the wing span,as well as 3 longitudinal sections on the leading edge,symmetry plane,and a plane between them at Angles of Attack(AOA)=20°and 30°and Re=1.2×10~5,2.4×10~5,and 3.6×10~5.The effects of the riblets were studied on the vortices diameter,vortex breakdown location,vortices distance from the wing surface,flow lines pattern nearby the wing,circulation distribution,and separation.The results show that the textured model has a positive effect on some of the parameters related to drag reduction and lift increase.The riblets increase the flow momentum near the wing’s upper surface except near the apex.They also increase the flow momentum behind the wing.     

Modified input estimation technique using pseudoresiduals

An adaptive tracking filter for maneuvering targets is proposed using modified input estimation technique. Pseudoresiduals are defined using measurements and the velocity estimate at the hypothesized maneuver onset time. With the pseudoresiduals and a new target model representing transitions of nominal accelerations, a new input estimation method for tracking a maneuvering target is derived. Since the proposed detection technique is more sensitive to maneuvers than previous work, the shorter window length can be employed to detect and compensate target maneuvers. Also shown is that the tracking performance of the proposed filter is similar to that of interacting multiple model method (IMM) with 3 models, while computational loads of our method are drastically reduced     

Sounding rocket developments in Spain

This paper contemplates the efforts and developments in the field of sounding rockets carried out in Spain from the decade of the 1960s to the early 1990s when the use of such vehicles was abandoned worldwide.The initial sounding rocket planning within the National Space Research Programs around 1964 (when Spain joined ESRO) is presented.The status of the rocket technology in Spain in 1964 is analysed, reviewing the main technology gaps and the way they were filled to make the planned developments possible.Three Spanish sounding rockets are presented: the INTA-255 (150 km apogee with formative objectives, first launched in 1969), the INTA-300 (300 km apogee with high characteristics and commercial capabilities, first launched in 1974) and the INTA-100 (115 km apogee being finally a totally national product, first launched in 1980).Some guided rocket vehicle projects which were based, on some way, on the previous sounding rockets activities are also mentioned in this paper.     

A new approach to the telescope operation method for satellite tracking using a time synchronization technique

For the development of a telescope that is capable of precisely tracking satellites and high-speed operation such as satellite laser ranging, a special method of telescope operation is required. This study aims to propose a new telescope operation method and system configuration for the independent development of a mount and an operation system which includes the host computer. Considering that the tracking of a satellite is performed in real time, communication and synchronization between the two independent subsystems are important. Therefore, this study applied the concept of time synchronization, which is used in various fields of industry, to the communication between the command computer and the mount. In this case, communication delays do not need to be considered in general, and it is possible to cope with data loss. Above all, when the mount is replaced in the future, only the general communication interface needs to be modified, and thus, it is not limited by replacement in terms of the overall system management. The performance of the telescope operation method developed in this study was verified by applying the method to the first mobile SLR system in Korea. This study is significant in that it proposed a new operation method and system configuration, to which the concept of time synchronization was applied, for the observation system that requires an optical telescope.     

An introduction to the lunar and planetary science activities in Korea

Korea is planning a series of lunar space programs in 2020 starting with a lunar orbiter and a lander with a rover. Compared to other countries, Korea has a relatively brief history in space and planetary sciences. With the expected Korean missions on the near-term horizon and the relatively few Korean planetary scientists, Korea Institute of Geoscience and Mineral Resources (KIGAM) has established a new planetary research group focusing on development of prospective lunar instruments, analysis of the publicly available planetary data of the Moon, organizing nationwide planetary workshops, and initiating planetary educational programs with academic institutions. Korea has also initiated its own rocket development program, which could acquire a rocket-launch capability toward the Korean lunar mission. For the prospective Korea’s lunar science program, feasibility studies for some candidate science payloads have been started since 2010 for an orbiter and a lander. The concept design of each candidate instrument has been accomplished in 2012. It is expected that the development of science payloads may start by 2014 as Phase A. Not only developing hardware required for the lunar mission but also educational activities for young students are high priorities for Korea. The new plan of the Korean lunar mission can be successfully accomplished with international cooperative outreach programs in conjunction with internationally accessible planetary data system (PDS). This paper introduces the KIGAM’s international cooperative planetary research and educational programs and also summarizes other nationwide new developments for Korean lunar research projects at Kyung Hee University and Hanyang University.     

Sensitivity analyses of satellite propulsion components with their thermal modelling

Performing the sensitivity analyses of the contact conduction and the position of thermostat on the basis of the thermal model established, the study of thermal design is accomplished for the preparation of possible mechanical interface change of the satellite propulsion system depending on the satellite system design. A relatively simple thermal model is taken into consideration for the convenience of the analysis. A variety of the spacecraft bus voltages and the contact resistances are examined as well as the position of thermostat on propulsion components. As a consequence, even though the mechanical interface condition is changed on the same module, the successful thermal design could be achieved if we design the heater to have sufficiently large power with reference to the heritage value of contact resistance. Besides the reasonable performance on the thermal control is assured with the thermostat location errors, if the uncertainty in the position of thermostat is not quite large when assembling tank module.     

Development of multi-functional composite structures with embedded electronics for space application

Conventional spacecraft structural function has been limited to supporting loads and mounting avionics only. In contrast, the technology of ‘multi-functional structures’ can integrate thermal and electronic functions into the spacecraft’s inherent load-bearing capability. In addition, sufficient radiation shielding effectiveness can be provided for the anticipated mission environment. Utilizing this concept, the ratio of electrical functionality to spacecraft volume can be dramatically increased and significant mass savings can be obtained. In this paper, spacecraft electronics are miniaturized using advanced IT applications such as flexible circuitry, miniaturized components, featherweight connectors, and so on, that they can be easily embedded within a structural panel. A sandwich structural panel consists of an aluminum honeycomb core and lightweight CFRP facesheets. Integration of electronics is implemented within the panel by mounting electronics on a multi-layered composite enclosure with multi-materials. This composite enclosure provides a load-bearing, effective thermal conduction, radiation shielding capabilities and an available space for embedding electronics. A series of environmental tests and analyses is carried out to demonstrate that the flight hardware is qualified for the expected mission environments. This approach will be utilized for the advanced small satellite ‘STSAT-3’ to validate the multi-functional structures concept.