X-Ray images of the supernova remnant puppis A

Space Science Reviews -     

EXOSAT observations of the bright X-ray source GX9+1

We present the results of the spectral and timing analysis of an observation of GX9+1/4U1758-205 performed with the Medium Energy Experiment aboard EXOSAT. During our observation the source flux varied irregularly in time scales from minutes to hours. No periodic emission in the period range from 16 msec to 2000 sec was found with an upper limit of around 1% (3 ) for the pulsed fraction. The hardness ratio shows a correlated change with the flux intensity (Sco X-1 behaviour). The spectrum could be fitted by a double component model, a black body component (kT=1.16–1.26 keV) together with a thermal bremsstrahlung law (kT=13–15keV). The black-body temperature-black-body flux relation follows a Stefan Boltzmann law with R_BB=15.3 km^*D/10 kpc. No iron line was detected. The upper limit for the line equivalent width of a 6.7 keV iron emission line is 40 eV (1). The X-ray spectral behaviour of GX9+1 indicates, that this source belongs to the class of Low-Mass X-ray Binaries (LMXB).     

Correction to: Mission to Planet Earth: The First Two Billion Years

Space Science Reviews - The Ionospheric Connection Explorer (ICON) mission makes measurements in near-Earth space that provide knowledge of the state of the ionosphere. From the vantage of...     

Object image linking of earth orbiting objects in the presence of cosmics

In survey series of unknown Earth orbiting objects, no a priori orbital elements are available. In surveys of wide field telescopes possibly many non-resolved object images are present on the single frames of the series. Reliable methods have to be found to associate the object images stemming from the same object with each other, so-called linking. The presence of cosmic ray events, so-called Cosmics, complicates reliable linking of non-resolved images. The tracklets of object images allow to extract exact positions for a first orbit determination.     

Dust Evolution in Protoplanetary Discs and the Formation of Planetesimals

After 25 years of laboratory research on protoplanetary dust agglomeration, a consistent picture of the various processes that involve colliding dust aggregates has emerged. Besides sticking, bouncing and fragmentation, other effects, like, e.g., erosion or mass transfer, have now been extensively studied. Coagulation simulations consistently show that \(\upmu\mbox{m}\)-sized dust grains can grow to mm- to cm-sized aggregates before they encounter the bouncing barrier, whereas sub-\(\upmu\mbox{m}\)-sized water-ice particles can directly grow to planetesimal sizes. For siliceous materials, other processes have to be responsible for turning the dust aggregates into planetesimals. In this article, these processes are discussed, the physical properties of the emerging dusty or icy planetesimals are presented and compared to empirical evidence from within and without the Solar System. In conclusion, the formation of planetesimals by a gravitational collapse of dust “pebbles” seems the most likely.     

Simulation-based evaluation of a cold atom interferometry gradiometer concept for gravity field recovery

The prospects of future satellite gravimetry missions to sustain a continuous and improved observation of the gravitational field have stimulated studies of new concepts of space inertial sensors with potentially improved precision and stability. This is in particular the case for cold-atom interferometry (CAI) gradiometry which is the object of this paper. The performance of a specific CAI gradiometer design is studied here in terms of quality of the recovered gravity field through a closed-loop numerical simulation of the measurement and processing workflow. First we show that mapping the time-variable field on a monthly basis would require a noise level below $5\text{mE}/\sqrt{\text{Hz}}$. The mission scenarios are therefore focused on the static field, like GOCE. Second, the stringent requirement on the angular velocity of a one-arm gradiometer, which must not exceed ${10}^{-6}$?rad/s, leads to two possible modes of operation of the CAI gradiometer: the nadir and the quasi-inertial mode. In the nadir mode, which corresponds to the usual Earth-pointing satellite attitude, only the gradient $V_{\mathit{yy}}$, along the cross-track direction, is measured. In the quasi-inertial mode, the satellite attitude is approximately constant in the inertial reference frame and the 3 diagonal gradients $V_{\mathit{xx}}\text{,}{V}_{\mathit{yy}}$ and $V_{\mathit{zz}}$ are measured. Both modes are successively simulated for a 239?km altitude orbit and the error on the recovered gravity models eventually compared to GOCE solutions. We conclude that for the specific CAI gradiometer design assumed in this paper, only the quasi-inertial mode scenario would be able to significantly outperform GOCE results at the cost of technically challenging requirements on the orbit and attitude control.     

H2O-Activity of Comet Hale-Bopp

Due to the outstanding brightness of Comet Hale-Bopp measurements of water production rates were possible over a wide range of heliocentric distances (up to 5 AU). A variety of observing techniques have been used, including radio observations, IR- and UV-measurements. The H₂O-production of a comet is closely connected with the energy balance and the composition of its surface. By comparing measured and calculated rates it is possible to derive properties of the nucleus. The results of this study demonstrate the importance of seasonal effects and show that a low thermal conductivity enhances the water production rate. The observations can be matched with a relatively low, lunar-like thermal conductivity. A lower size limit for the nucleus of Hale-Bopp is derived. This revised version was published online in June 2006 with corrections to the Cover Date.     

Vertical and radial metallicity gradients in high latitude galactic fields with SDSS

We used the ugr magnitudes of 1437467 F-G type main-sequence stars with metal abundance $-2?[\mathrm{Fe}/\mathrm{H}]?+0.2$ dex and estimated radial and vertical metallicity gradients for high Galactic-latitude fields, $50°<b?90°$ and $0°<l?360°$, of the Milky Way Galaxy. The radial metallicity gradient $d[\mathrm{Fe}/\mathrm{H}]/\mathit{dR}=-0.042\pm 0.011$ dex kpc^?1 estimated for the stars with $1.31<z\le 1.74$ kpc is attributed to the thin-disc population. While, the radial gradients evaluated for stars at higher vertical distances are close to zero indicating that the thick disc and halo have not undergone a radial collapse phase at least at high Galactic latitudes. The vertical metallicity gradients estimated for stars with three different Galactic latitudes, $50°<b?65°,65°<b?80°$ and $80°<b?90°$ do not show a strong indication for Galactic latitude dependence of our gradients. The thin disc, $0.5<z?2$ kpc, with a vertical metallicity gradient $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.308\pm 0.018$ dex kpc^?1, is dominant only in galactocentric distance interval $6<R?10$ kpc, while the thick disc ($2<z?5$ kpc) could be observed in the intervals $6<R?10$ and $10<R?15$ kpc with compatible vertical metallicity gradients, i.e. $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.164\pm 0.014$ dex kpc^?1 and $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.172\pm 0.016$ dex kpc^?1. Five vertical metallicity gradients are estimated for the halo ($z>5$ kpc) in three galactocentric distance intervals, $6<R?10,10<R?15$ and $15<R?20$ kpc. The first one corresponding to the interval $6<R?10$ kpc is equal to $d\left[\mathrm{Fe}/\mathrm{H}\right]/\mathit{dz}=-0.023\pm 0.006$ dex kpc^?1, while the others at larger galactocentric distances are close to zero. We derived synthetic vertical metallicity gradients for 2,230,167 stars and compared them with the observed ones. There is a good agreement between the two sets of vertical metallicity gradients for the thin disc, while they are different for the thick disc. For the halo, the conspicuous difference corresponds to the galactocentric distance interval $6<R?10$ kpc, while they are compatible at higher galactocentric distance intervals.     

γ-TiAl金属间化合物室温脆性及其影响因素

本文对影响γ-TiAl金属间化合物的室温脆性的因素从晶体结构尺寸、合金成分、变形位错、电子结构等四个方面进行了比较全面的阐述,得出结论：空间电荷的均匀分布有利于γ-TiAl合金室温塑性的改善。     

完全互补序列在MIMO雷达中的应用

多输入多输出(MIMO,Multiple-Input Multiple Output)雷达系统采用多天线方式,利用发射信号之间的正交性提高系统性能,但传统的单码序列之间不能满足完全正交(自相关和互相关旁瓣全为0)的特性,影响了系统性能.针对上述问题,结合完全互补序列的特点,推导了完全互补序列模糊函数的数学表达式,进行了相应的计算机仿真,仿真结果充分验证了模糊函数的有效性;并对基于完全互补序列的雷达速度分辨率进行了分析.另外,研究了完全互补序列在MIMO雷达中的应用问题,并建立基于完全互补序列的MIMO雷达信号模型,结果表明:完全互补序列在MIMO雷达中具有很好的应用前景,同时验证了完全互补序列在MIMO雷达应用中的合理性和正确性.