磁选态单束铯束管束光学参数的模拟计算和设计

为提高铯束管跃迁信号强度,在束光学参数设计中,用蒙特卡罗方法模拟计算铯原子通过率和未跃迁比例。通过改变模拟计算中的束光学参数,分析铯原子通过率、未跃迁比例和倍增器首极电流的变化趋势,得到了主要束光学参数的合理取值范围。在铯束管实际装配和试验中使用束光学参数设计结果,有效地增加了倍增器首极电流。     

表面介质阻挡放电对扩散火焰燃烧特性的影响

针对表面介质阻挡放电（SDBD）在激发等离子体时具有显著的气动效应和化学活化效应，为分析表面介质阻挡放电对空气/甲烷同轴剪切扩散燃烧的助燃效果，实验使用高频交流电源，基于等离子体诱导射流逆向激励对火焰施加控制。根据获取的射流流场纹影图像、火焰图像和CH*自发辐射，研究了等离子体对不同燃烧条件下火焰燃烧特性的影响。结果表明:受等离子体气动激励作用，火焰上游细长剪切层的空气/甲烷掺混得到增强，从而扩大了剪切层燃烧宽度，同时燃烧释热速率会明显提高，这主要与等离子体活化效应有关，并且该效应显著增强了位于喷嘴出口火焰基的燃烧强度。在空气流量较低时，等离子体气动激励可有效增大火焰下游湍流度和射流角，使火焰高度降低、宽度增大，且作用效果随放电电压提高逐渐增强。      

Influence of TiB2 particles on machinability and machining parameter optimization of TiB2/Al MMCs

In situ formed TiB₂ particle reinforced aluminum matrix composites (TiB₂/Al MMCs) have some extraordinary properties which make them be a promising material for high performance aero-engine blade. Due to the influence of TiB₂ particles, the machinability is still a problem which restricts the application of TiB₂/Al MMCs. In order to meet the industrial requirements, the influence of TiB₂ particles on the machinability of TiB₂/Al MMCs was investigated experimentally. Moreover, the optimal machining conditions for this kind of MMCs were investigated in this study. The major conclusions are: (1) the machining force of TiB₂/Al MMCs is bigger than that of non-reinforced alloy and mainly controlled by feed rate; (2) the residual stress of TiB₂/Al MMCs is compressive while that of non-reinforced alloy is nearly neutral; (3) the surface roughness of TiB₂/Al MMCs is smaller than that of non-reinforced alloy under the same cutting speed, but reverse result was observed when the feed rate increased; (4) a multi-objective optimization model for surface roughness and material removal rate (MRR) was established, and a set of optimal parameter combinations of the machining was obtained. The results show a great difference from SiC particle reinforced MMCs and provide a useful guide for a better control of machining process of this material.     

纤维增韧陶瓷基复合材料的比例极限应力与残余热应力关系

从细观力学角度分析并建立了纤维增韧陶瓷基复合材料从制备温度冷却到室温过程中产生的残余热应力与复合材料的比例极限应力的关系模型。该模型表明,减少复合材料的残余热应力或提高复合材料的纤维与基体的模量比,均可提高复合材料的比例极限应力。通过单调拉伸实验测试了先驱体浸渍裂解法(PIP)制备的2D SiC/SiC复合材料的比例极限应力,并采用文中建立的比例极限应力与残余热应力关系模型,计算出复合材料SiC基体的残余热应力为-19.5 MPa。分析表明,该结果是合理的。此外,引用了公开文献报道的5种复合材料体系数据,用于验证文中所建立的比例极限应力与残余热应力关系模型的适应性和可靠性,计算结果与实验结果最大误差为18.6%,表明该模型具有较好的适应性和可靠性,可为纤维增韧陶瓷基复合材料的研究提供新思路。     

可控曲率半径的圆柱形叶片逐点绘型方法

针对中低比转速离心泵,根据叶片进出口边界条件,以逐点绘型方法为基础,提出了一种新的曲率半径可控的叶片绘型方法。该方法的主要特点是曲率半径比值可作为设计常量由设计人员根据需要事先给定,随后分析了曲率半径及比例因子对叶片安放角、叶片包角、相对速度及速度矩等的影响。结果表明,不同曲率半径比值下的叶型参数及流动参数变化范围很大,曲率半径比值较大时,节流损失较大,泵扬程较低,曲率半径比值较小时,脱流损失较大,泵效率较低,存在较优的曲率半径比值区间[1.4,2.4],使叶片安放角平滑变化,泵的综合性能较优,在该优化区间内,取较大的曲率半径比值有利于获得较优的汽蚀性能,比例因子为0时叶片安放角的变化较为平稳,可用于开展离心泵的初步设计。     

黄渤海晴空像元下雾霾识别的机器学习算法

为实时有效地识别和监测雾霾，选取2013年10月4日与10月5日的两景MODIS遥感图像，利用不同类型像元的光谱差异，基于神经网络模型，建立海上雾霾的遥感识别机器学习算法。经检验表明，在晴空条件下，机器学习算法反演精度相对较高，已超过98%，利用算法可以实现对中国近海上空雾霾的监测。     

A surface parametric control and global optimization method for axial flow compressor blades

An aerodynamic optimization method for axial flow compressor blades available for engineering is developed in this paper. Bezier surface is adopted as parameterization method to control the suction surface of the blades, which brings the following advantages:(A) significantly reducing design variables;(B) easy to ensure the mechanical strength of rotating blades;(C) better physical understanding;(D) easy to achieve smooth surface. The Improved Artificial Bee Colony(IABC) algorithm, which significantly increases the convergence speed and global optimization ability, is adopted to find the optimal result. A new engineering optimization tool is constructed by combining the surface parametric control method, the IABC algorithm, with a verified Computational Fluid Dynamics(CFD) simulation method, and it has been successfully applied in the aerodynamic optimization for a single-row transonic rotor(Rotor 37) and a single-stage transonic axialflow compressor(Stage 35). With the constraint that the relative change in the flow rate is less than0.5% and the total pressure ratio does not decrease, within the acceptable time in engineering, the adiabatic efficiency of Rotor 37 at design point increases by 1.02%, while its surge margin 0.84%,and the adiabatic efficiency of Stage 35 0.54%, while its surge margin 1.11% after optimization, to verify the effectiveness and potential in engineering of this new tool for optimization of axial compressor blade.     

Availability modeling for periodically inspection system with different lifetime and repair-time distribution

Availability is a main feature of design and operation of all engineering system. Recently,availability evaluation of periodical inspection systems with different structures is at the center of attention due to the wide application in engineering. In this paper, an analytical and probabilistic availability model for periodical inspection system is proposed by a new recursively algorithm,which can achieve limiting average availability and instantaneous availability of periodical inspection system under arbitrary lifetime and repair-time distributions. Then three application examples are presented, the systems lifetime and repair-time are respectively fellow exponential/exponential,Weibull/normal and Weibull/lognormal distribution. Finally, a Weibull/lognormal system is studied to analyze the dynamic relationship between inspection period and availability. The results indicate that the proposed approach can provide the technology support for improving system availability and determining reasonable inspection period.