某型教练机嵌入式训练系统顶层设计技术研究

本文通过对该型教练机现有航空电子系统构型、驾驶员操作程序、接口控制文件深入研究,结合未来功能扩展需求,给出了合理的系统构型分析、功能分配、数据流规划、原相关系统软件改动分析,在此基础上还设计出了嵌入式训练系统技术方案.依据方案研制的嵌入式训练系统原理样机通过系统动态试验、航电系统地面综合试验和飞机地面通电试验,证明系统...     

舰载机着舰中侧风和常值甲板风的影响研究

舰载机要安全着舰,需要精确控制全着舰航线轨迹及其稳定性,风是影响舰载机着舰航线的主要因素。论文主要研究了侧风和常值甲板风对舰载机着舰飞行产生的影响,建立了影响舰载机着舰飞行的不同侧风、甲板风的数学模型。根据数学模型计算了不同甲板风和侧风下着舰飞行轨迹参数,从而提出了着舰飞行修正方法。     

8mm Dicke辐射计波形仿真研究

采用System view软件对从输入到天线的噪声信号到A/D采样之前的各个模块和辐射计线性度进行了波形的仿真研究,仿真结果和实际相符合,对辐射计的硬件实现提供了很好的指导作用。     

基于人性假设理论的双师型教师培养激励机制研究

高等职业院校是我国深入实施十二五科教兴国战略和人才强国战略的重要平台和基地，随着高等职业院校规模的扩大．高技能人才培养所需要的高素质师资队伍的建设变得更加重要。从人性假设理论人手，分析了高等职业院校培养双师型师资队伍存在的不足之处，指出了双师型教师的培养和队伍建设必须充分考虑到教师这个主题的特殊性，需要在生理需求至自我实现需求的各个层次上做出合理的决策，有效激励教师，达到双师型教师培养和学校发展统一的目标。     

EPDM包覆层热解状态下的力学行为及本构模型

为了准确描述固体火箭发动机三元乙丙(EPDM)包覆层在不同热解状态下的力学特性,通过热重分析的方法得到EPDM的热解温度范围,并采用准静态单轴拉伸实验的方法获得EPDM在不同热解温度下的应力-应变曲线。以Ogden(n=2)模型为基础,分别对不同热解状态下的力学曲线进行建模,并通过对实验数据的拟合获得模型参数。结果表明,在初始热解状态下,材料只发生了少量的失水和气体的逃逸,其力学行为可通过粘超弹本构模型进行描述;随着材料热解程度增加,基体材料和填充纤维均遭到破坏,其力学行为表现为超弹脆性材料特性。     

A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.     

Water feed influence on nitric oxide emission under oxidation of near-stoichiometric air-methane mixtures

We considered the influence of temperature on the nitric oxide emission under combustion of the near-stoichiometric mixtures with and without water feed. We revealed the advantage of the method of fuel-water-air mixture combustion over that of the leaned mixture combustion.     

Determination of characteristic frequencies of elastic oscillations of the <Emphasis Type="Italic">International Space Station</Emphasis> construction

The results of investigating free oscillations of the International Space Station construction appearing during spacecraft docking and undocking are described. The study is carried out using the measurement data of the low-frequency MAMS accelerometer. Several intervals of measurements performed in 2005 and 2006 were chosen to be studied. For chosen intervals, only the data intervals corresponding to the process of free attenuation of the oscillations construction elements were analyzed. Characteristic frequencies of elastic oscillations of the station construction and attenuation coefficients corresponding to them are found. The comparative analysis of the results obtained for various docking ports (nodes) is carried out. The described study is performed as a part of the technical experiment “The ISS Environment” carried out onboard the station in accordance with the Russian program of scientific and engineering experiments.     

直升机超短波通信链路分析

通过对超短波通信链路的分析,得出直升机超短波通信链路模型;以实现超短波电台通信距离要求为目标,分析通信链路中影响通信距离的各因素及其影响程度,并根据直升机实际情况,对机上配置多部超短波电台及与其他机载设备的电磁兼容性方面提出改善建议。