飞机下滑波束导引系统设计及仿真

下滑波束导引系统是飞机在自动着陆时所采用的一种重要无线电波束导引系统。首先,简要阐述了下滑波束导引系统的基本工作原理;然后,对导引系统的运动学环节及下滑耦合器进行分析,对飞机下滑波束导引系统结构进行设计;最后,在MATLAB平台下,对所设计的下滑波束导引系统进行大量仿真研究。仿真结果显示。所设计的下滑波束导引系统结构是合理的,其控制系统是稳定的,且其稳态性能也得到改善。     

基于A320飞机横航向控制律架构的LQ设计

空客A320飞机横航向控制律采用特征结构配置方法计算闭环增益,实现了期望特征值的配置及横航向关键参数之间的解耦。基于A320横航向控制律架构,提出使用线性二次型(Linear Quadratic,简称LQ)方法,对闭环增益进行重新设计。首先根据期望的特征值引入关键参数的频域整形环节,而后通过调整二次型性能指标加权矩阵实现期望特征值的逼近及关键参数之间的解耦,并求得闭环反馈增益,最后在特征结构、稳定裕度和横航向解耦效果方面与空客设计结果作了对比分析。仿真结果表明,LQ设计可获得与特征结构配置设计相近的结果,即得到接近期望值的特征值,并实现关键变量的解耦,同时保证了闭环稳定裕度。     

BAMO-THF叠氮型热塑性聚氨酯弹性体的合成与表征

为了研究叠氮型热塑性含能粘合剂的合成方法及反应条件对其力学性能的影响,通过熔融预聚二步法合成了以3,3-双(叠氮甲基)环氧丁烷-四氢呋喃共聚醚(BAMO-THF)为软段、异佛尔酮二异氰酸酯(IPDI)及1,4-丁二醇(BDO)为硬段的叠氮型热塑性聚氨酯弹性体(ATPE)。采用傅立叶变换红外光谱(FTIR)对所制备的ATPE的结构进行了表征。通过二正丁胺滴定法确定了最佳的预聚反应时间。研究比较了固化参数R和硬段含量对ATPE力学性能的影响。利用差示扫描量热(DSC)测定了ATPE的玻璃化转变温度,计算了硬段溶于软段的百分数。研究结果表明,所合成的ATPE具有典型的叠氮聚醚聚氨酯特征;确定了预聚反应时间为2 h;当R=1.02时,ATPE的拉伸强度最大,约为4 MPa;硬段含量为40%的ATPE的拉伸强度最大,为3.54 MPa;当硬段含量超过40%以后,硬段溶入软段的百分数小于10%,ATPE体现出良好的微相分离。     

Statistical study of interplanetary condition effect on geomagnetic storms: 2. Variations of parameters

We investigate the behavior of mean values of the solar wind’s and interplanetary magnetic field’s (IMF) parameters and their absolute and relative variations during the magnetic storms generated by various types of the solar wind. In this paper, which is a continuation of paper [1], we, on the basis of the OMNI data archive for the period of 1976–2000, have analyzed 798 geomagnetic storms with D _st ≤ −50 nT and their interplanetary sources: corotating interaction regions CIR, compression regions Sheath before the interplanetary CMEs; magnetic clouds MC; “Pistons” Ejecta, and an uncertain type of a source. For the analysis the double superposed epoch analysis method was used, in which the instants of the magnetic storm onset and the minimum of the D _st index were taken as reference times. It is shown that the set of interplanetary sources of magnetic storms can be sub-divided into two basic groups according to their slowly and fast varying characteristics: (1) ICME (MC and Ejecta) and (2) CIR and Sheath. The mean values, the absolute and relative variations in MC and Ejecta for all parameters appeared to be either mean or lower than the mean value (the mean values of the electric field E _y and of the B _z component of IMF are higher in absolute value), while in CIR and Sheath they are higher than the mean value. High values of the relative density variation sN/〈N〉 are observed in MC. At the same time, the high values for relative variations of the velocity, B _z component, and IMF magnitude are observed in Sheath and CIR. No noticeable distinctions in the relationships between considered parameters for moderate and strong magnetic storms were observed.     

推力室逆置点火瞬时真空舱流场数值与试验研究

针对高空模拟舱内逆向布置的推力室点火瞬时过程中舱内压力的变化规律进行了理论和数值仿真分析,推力室高速气流的动能是推力室短程点火过程中舱内压力大幅上升的主要原因.为保证推力室点火时舱内的真空度,需要在推力室出口配置导流装置将燃气导出真空舱.对单台和4台并联推力室进行点火试验,试验表明：采用燃气导流能够较好保持舱内真空度,是整机多推力室高空模拟试验的新思路.     

Detonation engine fed by acetylene–oxygen mixture

The advantages of a constant volume combustion cycle as compared to constant pressure combustion in terms of thermodynamic efficiency has focused the search for advanced propulsion on detonation engines. Detonation of acetylene mixed with oxygen in various proportions is studied using mathematical modeling. Simplified kinetics of acetylene burning includes 11 reactions with 9 components. Deflagration to detonation transition (DDT) is obtained in a cylindrical tube with a section of obstacles modeling a Shchelkin spiral; the DDT takes place in this section for a wide range of initial mixture compositions. A modified ka-omega turbulence model is used to simulate flame acceleration in the Shchelkin spiral section of the system. The results of numerical simulations were compared with experiments, which had been performed in the same size detonation chamber and turbulent spiral ring section, and with theoretical data on the Chapman–Jouguet detonation parameters.     

Thermodynamic properties of mixed fuel combustion products

In this paper, the results of calculating the processes of two fuel mixture combustion in different proportions are presented. The values of temperature, thermal capacity, specific gas constant and isentropic expansion ratio of combustion products are given. Also shown is the distinction of thermodynamic properties from the additivity law.     

数字化检验在航电系统集成生产中的应用

针对航电系统集成生产模式下数字化检验工作的深入研究,系统地总结了航电系统集成检验的内容、方法和工作流程。结合某型飞机航电系统集成数字化检验,构建了航电系统集成生产过程中数字化检验标准的框架结构,为实现航电系统集成生产中数字化检验标准和手段的发展提供了宝贵经验。     

有磁场时电子在航天器光电子鞘层中的漂移运动

采用二级漂移近似理论，研究了在航天器光电子鞘层中与电流收集有关的电子在磁场中的运动轨道和收集电子有关的磁瓶结构，结果表明当磁场越强，航天器表面电势越弱，磁瓶在无穷远处横截面积就越小。在光电子鞘层中，势垒对电流收集影响较大，磁瓶的横截面积在略远于垫垒处有极大值，磁瓶在无穷远处的横截面积并非随着势垒距航天器距离的远近而单调变化。     

Biomedical problems of EVA support during manned space flight to Mars

Current projects of manned missions to Mars are aimed to their realization in the second-third decades of this century. The purpose of this paper is to determine and review the main biomedical problems, that require a first and foremost decision for safety support of extravehicular activity (EVA) carried out by crewmembers of the Mars expedition. To a number of such problems the authors of the paper attribute a creation of adequate EVA equipment intended, first, for assembly of interplanetary spacecraft on the Earth orbit, performance of maintenance operations and scientific researches on the external surface of spacecraft during interplanetary flight and, secondly, for work on the Mars surface. New generation of space suits with low weight, high mobility and acceptable risk of decompression sickness must be as a central component of EVA equipment. The program for preparation to a Mars expedition also has to include special investigations in order to design the means and methods for a reliable protection of crew against space radiation, to elaborate the approach to medical monitoring and primary medical care during autonomous space mission, to maintain good health condition of crewmembers during EVA under the Mars gravity (0.38 g) after super long-term flight in weightlessness.