Attitude control system of the first Russian nanosatellite <Emphasis Type="Italic">TNS-0 no. 1</Emphasis>

The results of designing the attitude control system of the first Russian nanosatellite TNS-0 no. 1 providing orientation of its longitudinal axis along the local geomagnetic field induction vector are presented. The system consists of a permanent magnet and two sets of hysteresis rods. The magnetic and geometric parameters of the magnet and rods are calculated. The influence of the permanent magnet field on the hysteresis rods and mutual influence of the rods in the case of compact satellite packaging are analyzed. Examples of calculations of transient processes and steady-state angular satellite motion are presented.     

Numerical Simulation of Rotor Flow Field Based on Overset Grids and Several Spatial and Temporal Discretization Schemes

A numerical method based on solutions of Euler/Navier-Stokes (N-S) equations is developed for calculating the flow field over a rotor in hover. Jameson central scheme, van Leer flux-vector splitting scheme, advection upwind splitting method (AUSM) scheme, upwind AUSM/van Leer scheme, AUSM+ scheme and AUSMDV scheme are implemented for spatial discretization, and van Albada limiter is also applied. For temporal discretization, both explicit Runge-Kutta method and implicit lower-upper symmetric Gauss-Seidel (LU-SGS) method are attempted. Simultaneously, overset grid technique is adopted. In detail, hole-map method is utilized to identify intergrid boundary points (IGBPs). Furthermore, aimed at identification issue of donor elements, inverse-map method is implemented. Eventually, blade surface pressure distributions derived from numerical simulation are validated compared with experimental data, showing that all the schemes mentioned above have the capability to predict the rotor flow field accurately. At the same time, vorticity contours are illustrated for analysis, and other characteristics are also analyzed.     

Method of designing a neural controller for the automatic lateral control of unmanned aerial vehicles

The paper discusses a method of designing the neural controller for two-channel control of a technical object by an example of the roll and yaw control depending on deviations, velocities and accelerations of their variation.     

一种型号专用电源转换器快速检定系统的研制

阐述了依据Q/W 892A-2007《电源转换器检定规程》研制的型号专用电源转换器快速检定系统。通过研制专用拔出力检定装置和多功能智能转换开关,实现由PC机通过系统软件自动控制测试仪器进行检定以及检定结果的处理,并自动生成原始记录和证书报告。系统具有自动、智能等优点,能够实现电源转换器的快速检定。经应用,降低了劳动强度,节省了时间,提高了检定效率。     

LabWindows/CVI环境下调用Word文档的实现方法

目的介绍一种在Labwindows/CVI环境下调用Word的实现方法;方法结合具体的实例,实现对Word文档的调用;结果该方法可以按照规定的格式自动生成Word文档;结论提高了软件的效率和自动化程度。     

Analysis of an arbitrarily loaded shell of revolution based on the finite element method in a mixed formulation

The volume finite element in the form of hexahedron with nodal unknowns as components of the displacement vector and stress tensor has been developed to analyze the shells of revolution. The displacement vector components for the inner point of the finite element and the components of its stress tensor are expressed through the nodal unknowns using the method of vector and tensor fields interpolation by the trilinear shape functions; that provides taking into account the finite element displacement as a whole solid. The variational principle in a mixed formulation is applied to form the matrix of hexahedron deformation. The efficiency of the proposed method for approximating the values being sought as vector and tensor fields in comparison with the traditional method for approximating the values being sought as scalar fields is confirmed by a numerical example.     

某型教练机起落架信号电路改进设计

针对某型教练机存外场使用时出现起落架未放到位，而飞行员却没能及时发现的问题，本文对飞机起落架信号电路进行了分析，并提出了相应的改进措施。     

Approximate technique of tip vortex account in calculating a helicopter main rotor

We present the materials, which substantiate the application of a rather simple approximate method of accounting for disturbances of the airflow around the helicopter main rotor blades; in this case, the disturbances are caused by vortices that come down from the blade ends. It is shown that these disturbances influence significantly the varying blade loads.     

Investigation of the motion of (99942) apophis asteroid using the SKIF cyberia multiprocessor computing system

We present the results of investigation of the dynamics of (99942) Apophis asteroid, which will undergo a very close encounter with the Earth on April 13, 2029. The region of possible motions of the asteroid is considered on the time interval (2004, 2040). In addition, it is shown that an increase of the observational interval (2004, 2006) until 2008 allowed us to reduce significantly the area of possible motions. All investigations were performed by numerical methods with the help of algorithms and software developed by us in the environment of parallel programming using the SKIF Cyberia multiprocessor computer of the Tomsk State University.     

Decision-making of Aircraft Optimum Configuration Utilizing Multidimensional Game Theory

As multi-discipline coupling and components interference often affect the aircraft configuration decision-making and analysis during conceptual design process, this article presents an approach of multidimensional game theory based on aircraft components to deal with this problem. The idea is that the configuration decision-making process is regarded as the game for different disciplines and technologies, and the aircraft components are players. The payoff function with highest total gain means that according to the game protocols and multidimensional theory, the optimal aircraft configuration within the strategy set will be chosen. The decision-making model is applied to conceptual design process of the high altitude long endurance (HALE) unmanned aerial vehicle (UAV) based on the assessment of technological risk. The obtained optimum configuration is quite consistent with the current HALE UAV development trends. Thus, taking into account the coupling and interference factors, the multidimensional gaming model based on aircraft components will be an effective analysis method in the decision-making process of aircraft optimum configuration.