Hardware-Constrained Hybrid Coding of Video Imagery

The design, implementation, and performance of a video bandwidth compression system is described. In this system, compression is obtained by several methods including the use of DCT/DCPM hybrid coding, frame rate reduction, and resolution reduction. The overall compression ratio is up to 1000:1. The hardware-constrained design of the DCT and the DPCM is described and a new method is derived to solve the optimum integer bit-assignment problem associated with the block quantization process in the DPCM. Computer simulation results are presented which predict that the performance of the system using the derived optimal bit assignment method is superior to those obtained by other bit assignment methods. The real-time hybrid coding system design is optimized for a set of ?modified? average statistics to compress a wide variety of input video images. This approach eliminates the problem of nonzero dc mean value which could otherwise cause serious degradations in the system performance. The compression system is fully implemented and the quality of the reconstructed video as predicted by computer simulation has been demonstrated by the actual hardware performance. The PSNR of the reconstructed imagery is in excess of 36 dB at 2 bits per pixel.     

A coarse/fine search PN code acquisition scheme

A parallel two-stage acquisition technique is described for direct sequence spread spectrum (DS/SS) range finding applications. The technique offers hardware complexity that scales better with code length than matched filter correlators while providing better performance than sequential detection using comparable hardware     

Calculation of resonance current in high-frequency series-resonanceDC-DC converters

A method to calculate the resonance current in high-frequency series-resonant DC-DC converters is presented that includes the effect of the reverse-bias capacitance of output rectifiers and that of the primary inductance of the output transformer. A computer program developed as a tool to determine the amplitude of the resonance current for any given input and output conditions is also discussed. The results of the computer calculations agree well with experimental measurements     

具有两个测量控制面的适应壁风洞理论与实验

本文研究了具有两个测量控制面的适应壁风洞。在超临界马赫条件下,做了二维NACA-0012翼型实验。在近洞壁处的两个控制面上测取了静压。基于上述测量,叙述了在适应壁风洞中得到无干扰流场的迭代方法。给出了为外场计算这两个控制面上静压的函数关系。评述了所选取迭代方法的收敛性。得到了一步收敛公式,并且在数字模拟风洞中得到证实。结果指出,应用一步迭代公式,所选取的迭代方法可以加速使流场收敛到无界条件。     

A Discussion of Digital Processing in Synthetic Aperture Radar

This is a summary paper describing the processing of synthetic aperture radar (SAR) data using digital correlation algorithms. Fundamental SAR theory as it applies to the various SAR modes, namely, strip mapping, spotlight mapping, and Doppler beam sharpened mapping, is described and a baseline design applicable to all SAR modes is presented. Digital processor design is developed, starting with a simple single filter mechanization and proceeding through more complex processing algorithms. Prefilter design is discussed, as is the more advanced processing algorithms, namely, multiple parallel prefilters, two-stage correlation, and FFT processing. The primary processor tradeoff is increased functional complexity versus reduced arithmetic and memory requirements. For high-resolution applications, the arithmetic requirements can be reduced by an order of magnitude or more by implementing the more advanced processing algorithms.     

Random hysteresis PWM inverter with robust spectrum shaping

A hysteresis current-controlled pulsewidth modulation (PWM) scheme is simple and robust in switching control, but it is subject to not constant switching frequency. However, since its harmonic spectrum is not randomly distributed like those yielded by the random PWM (RPWM) scheme, the annoying harmonic effects still exist. A random switching control strategy is proposed here to let the harmonic spectrum of the hysteresis current-controlled PWM inverter be randomly distributed. First, the effect of varying band on the harmonic distribution characteristic of a hysteresis current-controlled PWM scheme is analyzed. Then a random hysteresis PWM scheme and its quantitative design procedure are proposed. Finally, a robust spectrum shaping technique is devised such that the desired harmonic distribution pattern can be achieved. In the resulting frequency spectrum, the magnitudes of lower frequency harmonics are shaped and reduced. Hence the inverter output with a better harmonic attribute is obtained. Validity of the proposed random hysteresis PWM scheme is verified by some simulated and measured results     

Proton phase space densities (0.5eV<Ep<5MeV) at midlatitudes from Ulysses SWICS/HI-SCALE measurements

Proton phase space densities in the solar wind frame from suprathermal velocities 10 km s^–1 to 30,000 km s^–1 (0.5 eV–5 MeV) were derived from combined SWICS and HISCALE measurements when Ulysses was at 5 AU and –24° heliolatitude. The period (19–23 January 1993) encompasses a forward/reverse shock pair (20 January, 0500 UT and 22 January, 0300 UT). Strong evidence is found for shock acceleration of pickup protons from interstellar hydrogen at all energies measured.     

THE CLUSTER ION SPECTROMETRY (CIS) EXPERIMENT

The Cluster Ion Spectrometry (CIS) experiment is a comprehensive ionic plasma spectrometry package on-board the four Cluster spacecraft capable of obtaining full three-dimensional ion distributions with good time resolution (one spacecraft spin) with mass per charge composition determination. The requirements to cover the scientific objectives cannot be met with a single instrument. The CIS package therefore consists of two different instruments, a Hot Ion Analyser (HIA) and a time-of-flight ion COmposition and DIstribution Function analyser (CODIF), plus a sophisticated dual-processor-based instrument-control and Data-Processing System (DPS), which permits extensive on-board data-processing. Both analysers use symmetric optics resulting in continuous, uniform, and well-characterised phase space coverage. CODIF measures the distributions of the major ions (H⁺, He⁺, He⁺⁺, and O⁺) with energies from ~0 to 40 keV/e with medium (22.5°) angular resolution and two different sensitivities. HIA does not offer mass resolution but, also having two different sensitivities, increases the dynamic range, and has an angular resolution capability (5.6° × 5.6°) adequate for ion-beam and solar-wind measurements.     

Global ena Image Simulations

The energetic neutral atom (ENA) images obtained by the ISEE and POLAR satellites pointed the way toward global imaging of the magnetospheric plasmas. The Imager for Magnetopause to Aurora Global Exploration (IMAGE) is the first mission to dedicate multiple neutral atom imagers: HENA, MENA and LENA, to monitor the ion distributions in high-, medium- and low-energy ranges, respectively. Since the start of science operation, HENA, MENA and LENA have been continuously sending down images of the ring current, ionospheric outflow, and magnetosheath enhancements from high pressure solar wind. To unfold multiple-dimensional (equal or greater than 3) plasma distributions from 2-dimensional images is not a trivial task. Comparison with simulated ENA images from a modeled ion distribution provides an important basis for interpretation of features in the observed images. Another approach is to develop image inversion methods to extract ion information from ENA images. Simulation studies have successfully reproduced and explained energetic ion drift dynamics, the transition from open to closed drift paths, and the magnetosheath response to extreme solar wind conditions. On the other hand, HENA has observed storm-time ion enhancement on the nightside toward dawn that differs from simple concepts but can be explained using more sophisticated models. LENA images from perigee passes reveal unexpected characteristics that now can be interpreted as evidence for a transient superthermal exospheric component that is gravitationally-influenced if not bound. In this paper, we will report ENA simulations performed during several IMAGE observed events. These simulations provide insight and explanations to the ENA features that were not readily understandable previously.     

Modeling and simulation of spacecraft power systems

Modeling of a complete spacecraft power processing system is presented, using the Boeing EASYS software. Component models are developed, and several system models including a solar array switching system, a partially shunted solar system, and cosmic background explorer (COBE) system are simulated. The modes of operation of the power system, such as shunt mode, battery-charge mode, and battery-discharge mode, are simulated for a complete orbit cycle