Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

Earth and Mars observation using periodic orbits

This paper reports the results of a general study carried out on the Periodic Multi-SunSynchronous Orbits (PMSSOs), which the classical Periodic SunSynchronous Orbits (PSSOs) represent a specific solution of. Such orbits allow to obtain cycles of observation of the same region in which the solar illumination regularly varies according to the value of the orbit elements and comes back to the initial condition after a time interval which is multiple of the revisit time. Therefore this kind of orbits meets all the remote sensing applications that need observations of the same area at different local times (for example the reconstruction of the day-nighttime trend of the surface temperature of the planet) and it is particularly suitable to the study of several terrestrial and martian phenomena (diurnal cycle of the hazes and clouds, dynamics of the thermal tides, density variations, meteorology phenomena, etc.). The design of PMSSO is based on the variation of the Right Ascension of the Ascending Node due to the Earth oblateness (referred as basic solution). However, with respect to the basic solution, the analysis of the perturbative effects has demonstrated the need, especially in the case of Mars, to take into account all the superior harmonics of the gravitational field. To this end a corrective factor, to add to the basic equations, has been proposed, allowing a significant saving of propellant (of the order of 2 km/s per year). Besides, single and multi-plane satellite constellations have been taken into account in order to improve the repetition of observation and the ground spatial resolution.     

Watershed image segmentation and cloud classification from multispectral MSG-SEVIRI imagery

In this work a technique for cloud detection and classification from MSG-SEVIRI (Meteosat Second Generation-Spinning Enhanced Visible and Infra-red Imager) imagery is presented. It is based on the segmentation of the multispectral images using order-invariant watershed algorithms, which are applied to the corresponding gradient images, computed by a multi-dimensional morphological operator. To reduce the over-segmentation produced by the watershed method, a RAG (Region Adjacency Graph) based region merging technique is applied, using region dissimilarity functions. Once the objects present in the image have been segmented, they are classified using a multi-threshold method based on physical considerations that takes into account the statistical parameters inside each region.     

A demonstration of the potential of Cryosat-2 to contribute to mesoscale observation

Cryosat-2 was designed for its primary scientific objectives, i.e. for cryosphere science. As far as oceanography is concerned, various mission design choices make it less accurate than missions designed to comply with ocean surface topography requirements such as Jason-2 or ENVISAT. Cryosat-2-specific errors are equivalent to more than 50% of the sea surface height variability over 40% of the oceans. Cryosat-2’s sampling pattern is also suboptimal for mesoscale observation because the satellite tracks from any consecutive period of 2 to 20 days (e.g. the most recent and most valuable data for near real time mesoscale observation) are aggregated in 500 km wide bands which are interleaved with 500 km wide observation gaps.     

航天器近距离导引轨迹规划仿真系统设计

以航天器近距离导引轨迹规划仿真验证为目标,对基于Visual C+ +,Vega Prime和Matlab的联合仿真系统进行开发研究.首先,建立了数学模型.然后,利用Matlab对所建立的数学模型进行优化求解,得到追踪航天器近距离机动时的位置、速度等信息.并通过Multigen Creator软件建立卫星等对象的模型,使用Vega Prime进行视景仿真.之后,采用Visual C+ +进行系统集成,建立基于三者相结合的仿真验证系统.最后,以椭圆参考轨道下近距离交会的连续推力式燃料最优轨迹规划为例,验证了该联合仿真系统.     

Computer modelling of a penetrator thermal sensor

The Philae lander is part of the Rosetta mission to investigate comet 67P/Churyumov-Gerasimenko. It will use a harpoon like device to anchor itself onto the surface. The anchor will perhaps reach depths of 1–2 m. In the anchor is a temperature sensor that will measure the boundary temperature as part of the MUPUS experiment. As the anchor attains thermal equilibrium with the comet ice it may be possible to extract the thermal properties of the surrounding ice, such as the thermal diffusivity, by using the temperature sensor data. The anchor is not an optimal shape for a thermal probe and application of analytical solutions to the heat equation is inappropriate. We prepare a numerical model to fit temperature sensor data and extract the thermal diffusivity. Penetrator probes mechanically compact the material immediately surrounding them as they enter the target. If the thermal properties, composition and dimensions of the penetrator are known, then the thermal properties of this pristine material may be recovered although this will be a challenging measurement. We report on investigations, using a numerical thermal model, to simulate a variety of scenarios that the anchor may encounter and how they will affect the measurement.     

虹湾虹湾嫦娥呼叫

二近月宫充当先遣侦察员 与2007年首次奔月的嫦娥一号一样,嫦娥二号依然是一颗绕月探测卫星.虽然她们姊妹俩是双胞胎孪生姐妹.然而,老二与老大的使命却不尽相同.     

Setting a standard: the limulus amebocyte lysate assay and the assessment of microbial contamination on spacecraft surfaces

Historically, colony-forming units as determined by plate cultures have been the standard unit for microbiological analysis of environmental samples, medical diagnostics, and products for human use. However, the time and materials required make plate cultures expensive and potentially hazardous in the closed environments of future NASA missions aboard the International Space Station and missions to other Solar System targets. The Limulus Amebocyte Lysate (LAL) assay is an established method for ensuring the sterility and cleanliness of samples in the meat-packing and pharmaceutical industries. Each of these industries has verified numerical requirements for the correct interpretation of results from this assay. The LAL assay is a rapid, point-of-use, verified assay that has already been approved by NASA Planetary Protection as an alternate, molecular method for the examination of outbound spacecraft. We hypothesize that standards for molecular techniques, similar to those used by the pharmaceutical and meat-packing industries, need to be set by space agencies to ensure accurate data interpretation and subsequent decision making. In support of this idea, we present research that has been conducted to relate the LAL assay to plate cultures, and we recommend values obtained from these investigations that could assist in interpretation and analysis of data obtained from the LAL assay.     

Microbial fuel cells applied to the metabolically based detection of extraterrestrial life

Since the 1970s, when the Viking spacecrafts carried out experiments to detect microbial metabolism on the surface of Mars, the search for nonspecific methods to detect life in situ has been one of the goals of astrobiology. It is usually required that a methodology detect life independently from its composition or form and that the chosen biological signature point to a feature common to all living systems, such as the presence of metabolism. In this paper, we evaluate the use of microbial fuel cells (MFCs) for the detection of microbial life in situ. MFCs are electrochemical devices originally developed as power electrical sources and can be described as fuel cells in which the anode is submerged in a medium that contains microorganisms. These microorganisms, as part of their metabolic process, oxidize organic material, releasing electrons that contribute to the electric current, which is therefore proportional to metabolic and other redox processes. We show that power and current density values measured in MFCs that use microorganism cultures or soil samples in the anode are much larger than those obtained with a medium free of microorganisms or sterilized soil samples, respectively. In particular, we found that this is true for extremophiles, which have been proposed as potential inhabitants of extraterrestrial environments. Therefore, our results show that MFCs have the potential to be used for in situ detection of microbial life.     

电子设备结构“解耦设计”理论及方法

文章运用结构动力修改的方法对电子设备的动力响应进行控制,即通过修改电子设备中机壳与电路板组件两部分的基频（指同一方向的基频,尤其是垂直于电路板方向）,使两者的基频相互错开来降低电路板组件的动力响应。采用两自由度基础强迫振动系统来模拟电子设备的振动响应,经分析给出了“非解耦系统”与“解耦系统”的概念,指出应将电子设备设计为“解耦系统”。最后对两自由度系统进行“分解”分析,给出了电子设备的“解耦设计”方法。