Computation of aircraft geometric height under radar surveillance

A radar system for geometric height estimation of civil aircraft is described. The system consists of one standard or mode S secondary surveillance radar (SSR) and one omnidirectional antenna sited away from SSR under an airplane. The geometric height is derived by trilateration. Systematic errors are compensated for by deriving the profile of the effect on height measurements of the bias in range measurements. A curve-fitting technique is then used, which estimates both the geometric height and any non-zero systematic errors     

High-frequency AC power distribution in Space Station

A utility-type, 20-kHz, AC power distribution system for the space station employing resonant power-conversion techniques is presented. The system converts raw DC voltage from photovoltaic cells or three-phase, low-frequency AC voltage from a solar dynamic generator into a regulated, 20-G kHz AC voltage for distribution among various loads. Operations of the components of the system such as driver inverter, DC receiver, bidirectional receiver, and three-phase AC receiver are discussed. EASY5 computer modeling and simulations were performed to study the local and global performance of the system. Simulation results show that the system has fast response and good transient behavior. The AC bus voltage is effectively regulated using the phase-control scheme, which is demonstrated with both line and load variations. The feasibility of paralleling the outputs of driver modules is illustrated with the driver modules synchronized and sharing a common feedback loop. A high-frequency, sinusoidal AC voltage is generated in the three-phase, AC input case, when the driver modules are phased 120° away from one another and their outputs are connected in series     

A multioutput LLC-type parallel resonant converter

When an LLC-type parallel resonant converter (LLC-PRC) operates above resonant frequency, the switching transistors can be turned off at zero voltage. Further study reveals that the LLC-PRC possesses the advantage of lower converter voltage gain as compared with the conventional PRC. Based on the analytic results derived, a complete set of design curves from which a systematic design procedure is developed is obtained. Experimental results from a 150-W, 150-kHz, multioutput LLC-type PRC power supply are presented     

Current distribution control for parallel connected converters. II

For pt.I, see ibid., vol.28, no.3, p.829-840 (1992). In the central-limit control (CLC), the multiloop controls are employed to regulate the output voltage and track the central weighted current, thus equalizing the output current of each converter module (CM). The current distribution error (CDE) between the output current of each CM is used as a criterion in judging system performance. The prediction and simulation results of this control scheme are illustrated. When incorporated with the maximum current limit, the proposed control method can determine the number of required converters in the active state for each load condition. As a result, the efficiency of a system can be increased significantly. A comparison between the performances of the system under master-slave control (MSC) and CLC is given     

具有两个测量控制面的适应壁风洞理论与实验

本文研究了具有两个测量控制面的适应壁风洞。在超临界马赫条件下,做了二维NACA-0012翼型实验。在近洞壁处的两个控制面上测取了静压。基于上述测量,叙述了在适应壁风洞中得到无干扰流场的迭代方法。给出了为外场计算这两个控制面上静压的函数关系。评述了所选取迭代方法的收敛性。得到了一步收敛公式,并且在数字模拟风洞中得到证实。结果指出,应用一步迭代公式,所选取的迭代方法可以加速使流场收敛到无界条件。     

The SOHO concept and its realisation

The Solar and Heliospheric Observatory (SOHO) — a space observatory to be placed, in 1995, 1.5 Gm sunward from the Earth in a halo orbit around the L1 Lagrange point — will investigate:

the solar corona, its heating and expansion into the solar wind, by both studying the radiation emerging from the outer solar atmosphere and in-situ solar wind measurements near 1 AU, and

the structure and dynamics of the solar interior by the method of helioseismology.

The science policy evolution leading to this comprehensive observatory concept is described. SOHO's link to the space-plasma-physics mission CLUSTER — devoted to the three-dimensional study of small structures in the magnetosphere — within the Solar Terrestrial Science Programme (STSP) and the embedding of STSP in the much larger International Solar Terrestrial Physics (ISTP) Programme are cited as well. The scientific subjects to be addressed by SOHO are introduced, and their current status assessed. Subsequently, the measurements required to advance these subjects are stated quantitatively and the payload, which will actually perform these measurements, is presented. The mission design, comprising spacecraft, orbit, operations and the data and ground systems are described. The special efforts made to obtain a reliable radiometric calibration of the instruments observing the Sun in the extreme-ultraviolet and to achieve a stable sensitivity through extreme cleanliness of spacecraft and instruments are emphasized and substantiated.     

Simulation considers the human factors

Human factors aspects of flight simulation design at McDonnell Douglas are considered. Modeling approaches are examined and testing with pilots and cockpits is described.     

Optimal serial distributed decision fusion

The problem of distributed detection involving N sensors is considered. The configuration of sensors is serial in the sense that the Jth sensor decides using the decision it receives along with its own observation. When each sensor uses the Neyman-Pearson test, the probability of detection is maximized for a given probability of false alarm, at the Nth stage. With two sensors, the serial scheme has a performance better than or equal to the parallel fusion scheme analyzed in the literature. Numerical examples illustrate the global optimization by the selection of operating thresholds at the sensors     

Noise analysis of a digital tanlock loop

The noise performance analysis of a nonuniform digital phase-locked loop (DPLL), called the digital tanlock loop (DTL), is investigated by both analytic and computer-simulation methods. The results are presented in terms of phase error probability mass function and mean time to skip cycle versus input signal-to-noise ratio (SNR). These results are compared to the ones obtained with the conventional sinusoidal DPLL loop (DPLL). It is found that, for low-to-moderate input SNR, the DTL has only a slight improvement over the DPLL. The DTL, however, has larger linear characteristics than the conventional DPLL, which makes it attractive for applications that require an increased tracking range or as a first stage in carrier tracking systems based on optimum estimation procedures such as a Kalman smoother     

Calculation of resonance current in high-frequency series-resonanceDC-DC converters

A method to calculate the resonance current in high-frequency series-resonant DC-DC converters is presented that includes the effect of the reverse-bias capacitance of output rectifiers and that of the primary inductance of the output transformer. A computer program developed as a tool to determine the amplitude of the resonance current for any given input and output conditions is also discussed. The results of the computer calculations agree well with experimental measurements