Slope Coding of Coherent Pulse-Burst Waveforms

Useful new properties are obtained with a coherent pulse-burst waveform if the FM slopes are allowed to change from pulse to pulse. A design feature using such a "slope-coded" waveform is the ability to transfer, in a controllable manner, ambiguity volume from the range ambiguity peaks to regions located between the peaks (in the frequency direction). Slope coding thus provides a useful mechanism for matching the waveform to the environment; i. e., it permits the signal designer to make some compromise between range ambiguity-peak heights and low-velocity clutter rejection.     

The early history of pulse compression radar-the history of pulsecompression at Sperry Gyroscope Company

The development of pulse compression radar at Sperry is related on the basis of the author's personal recollections. He discusses the first experiments, concept improvements, demonstration of the concept, system implementations, dealings with the US Patent Office, and finishing touches     

Electrical power on a 30 kW space-based radar satellite

An electrical power system for a space-based radar satellite is described. When the radar is on, its transmitter needs an average DC power of 30 kW. The problem of distributing the power efficiently in pulses to many transmit/receive modules is addressed. System requirements include a high-voltage battery and transmission line, load-sharing between the solar array, and the battery during sunlit periods, and a 25-kW solar array. A scaled-down version of the power system for a proof-of-concept demonstration is described     

Effects of increased shielding on gamma-radiation levels within spacecraft.

The Shuttle Activation Monitor (SAM) experiment was flown on the Space Shuttle Columbia (STS-28) from 8-13 August, 1989 in a 57 degrees, 300 km orbit. One objective of the SAM experiment was to determine the relative effect of different amounts of shielding on the gamma-ray backgrounds measured with similarly configured sodium iodide (NaI) and bismuth germante (BGO) detectors. To achieve this objective twenty-four hours of data were taken with each detector in the middeck of the Shuttle on the ceiling of the airlock (a high-shielding location) as well as on the sleep station wall (a low-shielding location). For the cosmic-ray induced background the results indicate an increased overall count rate in the 0.2 to 10 MeV energy range at the more highly shielded location, while in regions of trapped radiation the low shielding configuration gives higher rates at the low energy end of the spectrum.     

Deducing turbulence parameters from transionospheric scintillation measurements

The theoretical framework and experimental methodology used to interpret observations of ionospheric scintillations in terms of geophysical processes are reviewed and recent experimental observations of ionospheric scintillations are discussed in this paper. During the past 15 years significant progress has been made in several areas. In particular, significant advances have been made in theoretical understanding of the strong scintillation regime and the effects of short-term temporal variations of the scintillation producing irregularities on observations made with spaced-receiver geometries in both weak and strong scintillations. This improved understanding of the scintillation process has significantly increased the utility of the technique particularly in the equatorial latitudes where geometrical effects are least important.     

Solar radiometry: Total irradiance measurements

The operating principles of modern absolute radiometers are discussed and the methods of their characterization, that is the accurate determination of the uncertainties, are described. In view of this analysis, the results of the solar constant determinations of the last 6 years are reviewed and an estimate of their uncertainties given. Procedures for the strategy of future experiments are recommended.     

Adaptive Input Filter Compensation for Switching Regulators

An input filter is frequently employed between a switching regulator and its power source. However, its presence often results in degradation of dynamic performances and stability. The detrimental interaction is between an input filter and a switching regulator and is a function of the input filter parameters and also of the supply voltage. An earlier paper presented an analysis and design procedure aimed at developing a feed-forward loop to cancel this undesirable interaction. The feed-forward design is extended here to encompass a scheme that automatically accounts for changes in the supply voltage; the result is an adaptive compensation that tracks the input voltage variations. Experimental results are presented that confirm the adaptive nature of the design.     

A novel satellite image encryption algorithm based on hyperchaotic systems and Josephus problem

With the rapid growth of the number of Earth observation satellite (EOS) supporting critical applications, it is required to improve the security techniques to protect the sensitive data and images during the transmission between the satellites and the ground stations. This paper introduces a new satellite image encryption algorithm based on the Linear Feedback Shift Register (LFSR) generator, SHA 512 hash function, hyperchaotic systems, and Josephus problem. LFSR generates a matrix that is used to construct the 512-bits value of the hash function. These bits are used to set the initial values and parameters of the proposed encryption algorithm. Firstly, the six dimensions (6-D) hyperchaotic system is divided into three parts, where every two equations are considered as one part. Secondly, the 1-D hyperchaotic logistic-tent system is considered as the controller to select one part. The selected part is used to generate a matrix that is XORed with the original image. Thirdly, the scrambling operation by Josephus sequences is applied to the output of the previous step by scrambling the rows and the columns according to the selected part to produce the pre-encrypted image. Finally, if the number of iterations is less than the required number which is considered as a parameter of the secret key, the previous operations will be repeated in the pre-encrypted image; otherwise, the pre-encrypted image is considered as the final cipher image. Experimental and analyses results show that the proposed algorithm has good performance in terms of high level of security, large enough key-space, tolerance to Single Event Upsets (SEU) as well as low time complexity.     

ExoMars 2016 Schiaparelli Module Trajectory and Atmospheric Profiles Reconstruction

On 19^th October 2016 Schiaparelli module of the ExoMars 2016 mission flew through the Mars atmosphere. After successful entry and descent under parachute, the module failed the last part of the descent and crashed on the Mars surface. Nevertheless the data transmitted in real-time by Schiaparelli during the entry and descent, together with the entry state vector as initial condition, have been used to reconstruct both the trajectory and the profiles of atmospheric density, pressure and temperature along the traversed path.The available data-set is only a small sub-set of the whole data acquired by Schiaparelli, with a limited data rate (8 kbps) and a large gap during the entry because of the plasma blackout on the communications.This paper presents the work done by the AMELIA (Atmospheric Mars Entry and Landing Investigations and Analysis) team in the exploitation of the available inertial and radar data. First a reference trajectory is derived by direct integration of the inertial measurements and a strategy to overcome the entry data gap is proposed. First-order covariance analysis is used to estimate the uncertainties on all the derived parameters. Then a refined trajectory is computed incorporating the measurements provided by the on-board radar altimeter.The derived trajectory is consistent with the events reported in the telemetry and also with the impact point identified on the high-resolution images of the landing site.Finally, atmospheric profiles are computed tacking into account the aerodynamic properties of the module. Derived profiles result in good agreement with both atmospheric models and available remote sensing observations.     

Regolith X-Ray Imaging Spectrometer (REXIS) Aboard the OSIRIS-REx Asteroid Sample Return Mission

The Regolith X-ray Imaging Spectrometer (REXIS) is the student collaboration experiment proposed and built by an MIT-Harvard team, launched aboard NASA’s OSIRIS-REx asteroid sample return mission. REXIS complements the scientific investigations of other OSIRIS-REx instruments by determining the relative abundances of key elements present on the asteroid’s surface by measuring the X-ray fluorescence spectrum (stimulated by the natural solar X-ray flux) over the range of energies 0.5 to 7 keV. REXIS consists of two components: a main imaging spectrometer with a coded aperture mask and a separate solar X-ray monitor to account for the Sun’s variability. In addition to element abundance ratios (relative to Si) pinpointing the asteroid’s most likely meteorite association, REXIS also maps elemental abundance variability across the asteroid’s surface using the asteroid’s rotation as well as the spacecraft’s orbital motion. Image reconstruction at the highest resolution is facilitated by the coded aperture mask. Through this operation, REXIS will be the first application of X-ray coded aperture imaging to planetary surface mapping, making this student-built instrument a pathfinder toward future planetary exploration. To date, 60 students at the undergraduate and graduate levels have been involved with the REXIS project, with the hands-on experience translating to a dozen Master’s and Ph.D. theses and other student publications.