Effects of increased shielding on gamma-radiation levels within spacecraft.

The Shuttle Activation Monitor (SAM) experiment was flown on the Space Shuttle Columbia (STS-28) from 8-13 August, 1989 in a 57 degrees, 300 km orbit. One objective of the SAM experiment was to determine the relative effect of different amounts of shielding on the gamma-ray backgrounds measured with similarly configured sodium iodide (NaI) and bismuth germante (BGO) detectors. To achieve this objective twenty-four hours of data were taken with each detector in the middeck of the Shuttle on the ceiling of the airlock (a high-shielding location) as well as on the sleep station wall (a low-shielding location). For the cosmic-ray induced background the results indicate an increased overall count rate in the 0.2 to 10 MeV energy range at the more highly shielded location, while in regions of trapped radiation the low shielding configuration gives higher rates at the low energy end of the spectrum.     

Analysis of GPS and Loran-C performance for land vehicle navigationin the Canadian Rockies

Loran-C and GPS were assessed for vehicular navigation along selected roads of British Columbia during the winter of 1991. The general topography of this mountainous area is described, together with the specific topographic features and tree coverage characteristics of the 2000 km of roads tested on the mainland and on Vancouver Island. The configuration and characteristics of the Loran C Canadian West Coast chain along the roads used are described. The portable vehicle-mounted system used to collect and analyze the Loran-C and GPS signals along road profiles is described. The performance of Loran-C is analyzed in terms of signal to noise ratios (SNR), field strength, and time-difference distortions, as measured by differential GPS. These distortions, which can reach several hundred meters over distances of less than 20 km, are analyzed in terms of topographic features. The possibility of using these time-independent distortions to calibrate Loran-C for use along the above roads is discussed. Masking of GPS signals due to topographic features and tree coverage along the roads is analyzed. A comparative analysis of both Loran-C and GPS is presented in terms of signal availability and accuracy     

Deducing turbulence parameters from transionospheric scintillation measurements

The theoretical framework and experimental methodology used to interpret observations of ionospheric scintillations in terms of geophysical processes are reviewed and recent experimental observations of ionospheric scintillations are discussed in this paper. During the past 15 years significant progress has been made in several areas. In particular, significant advances have been made in theoretical understanding of the strong scintillation regime and the effects of short-term temporal variations of the scintillation producing irregularities on observations made with spaced-receiver geometries in both weak and strong scintillations. This improved understanding of the scintillation process has significantly increased the utility of the technique particularly in the equatorial latitudes where geometrical effects are least important.     

Development of x-ray mirrors for high-energy astrophysics in czechoslovakia

The grazing incidence X-ray mirrors with diameters between 20 and 240 mm were produced by two different replica techniques. Five mirrors were flown in space experiments. It has been confirmed that the galvanoplastic replica mirrors are well suited for applications in space telescopes and laboratory microscopes.     

Solar radiometry: Total irradiance measurements

The operating principles of modern absolute radiometers are discussed and the methods of their characterization, that is the accurate determination of the uncertainties, are described. In view of this analysis, the results of the solar constant determinations of the last 6 years are reviewed and an estimate of their uncertainties given. Procedures for the strategy of future experiments are recommended.     

Adaptive Input Filter Compensation for Switching Regulators

An input filter is frequently employed between a switching regulator and its power source. However, its presence often results in degradation of dynamic performances and stability. The detrimental interaction is between an input filter and a switching regulator and is a function of the input filter parameters and also of the supply voltage. An earlier paper presented an analysis and design procedure aimed at developing a feed-forward loop to cancel this undesirable interaction. The feed-forward design is extended here to encompass a scheme that automatically accounts for changes in the supply voltage; the result is an adaptive compensation that tracks the input voltage variations. Experimental results are presented that confirm the adaptive nature of the design.     

Instrumentenentwicklungen für anwendungsaufgaben der fernerkundung photogrammetrie,geophysik und geodäsie

(Instrument Developments for Applications in Remote Sensing, Photogrammetry, Geophysics and Geodesy) The Modular Optoelectronic Multispectral Seanner MOMS-01, a CCD camera using the push-broom scanner principle, is presented in this paper in its flight configuration. This instrument will be the first European-built spaceborne unaging system for remote sensing applications (launch with Shuttle flight No. 7).Follow-on developments of this initial two-channel version are oriented to an extension of capabilities by a panchromatic high-resolution stereoscopic module for thematic mapping and two additional spectral channels in the reflective IR (up to 2.3 μm) offering a high interpretation potential for future earth resources exploration missions. Furthermore the subjects of advanced laser technology studies are introduced: A picosecond pulse laser system for detection of tectonic motions and for geodetic application, a CO laser for ultra precise range rate determination (Earth potential and Geoid) and a laser range finder for intersatellite distance measurements.     

Cellular parameters for track structure modeling of radiation hazard in space.

Based on irradiation with 45 MeV/u N and B ions and with Co-60 gamma rays, cellular parameters of Katz's track structure model have been fitted for the survival of V79-379A Chinese hamster lung fibroblasts. Cellular parameters representing neoplastic transformations in C3H10T/1/2 cells after their irradiation with heavy ion beams, taken from earlier work, were also used to model the radiation hazard in deep space, following the system for evaluating, summing and reporting occupational exposures proposed in 1967 by a subcommittee of NCRP. We have performed model calculations of the number of transformations in surviving cells, after a given fluence of heavy charged particles of initial energy 500 MeV/u, penetrating thick layers of cells. We take the product of cell transformation and survival probabilities, calculated along the path lengths of charged particles using cellular survival and transformation parameters, to represent a quantity proportional to the "radiation risk factor" discussed in the NCRP document. The "synergistic" effect of simultaneous charged particle transfers is accounted for by the "track overlap" mode inherent in the model of Katz.     

Uncertainties in estimates of the risks of late effects from space radiation.

Methods used to project risks in low-Earth orbit are of questionable merit for exploration missions because of the limited radiobiology data and knowledge of galactic cosmic ray (GCR) heavy ions, which causes estimates of the risk of late effects to be highly uncertain. Risk projections involve a product of many biological and physical factors, each of which has a differential range of uncertainty due to lack of data and knowledge. Using the linear-additivity model for radiation risks, we use Monte-Carlo sampling from subjective uncertainty distributions in each factor to obtain an estimate of the overall uncertainty in risk projections. The resulting methodology is applied to several human space exploration mission scenarios including a deep space outpost and Mars missions of duration of 360, 660, and 1000 days. The major results are the quantification of the uncertainties in current risk estimates, the identification of factors that dominate risk projection uncertainties, and the development of a method to quantify candidate approaches to reduce uncertainties or mitigate risks. The large uncertainties in GCR risk projections lead to probability distributions of risk that mask any potential risk reduction using the "optimization" of shielding materials or configurations. In contrast, the design of shielding optimization approaches for solar particle events and trapped protons can be made at this time and promising technologies can be shown to have merit using our approach. The methods used also make it possible to express risk management objectives in terms of quantitative metrics, e.g., the number of days in space without exceeding a given risk level within well-defined confidence limits.     

A novel satellite image encryption algorithm based on hyperchaotic systems and Josephus problem

With the rapid growth of the number of Earth observation satellite (EOS) supporting critical applications, it is required to improve the security techniques to protect the sensitive data and images during the transmission between the satellites and the ground stations. This paper introduces a new satellite image encryption algorithm based on the Linear Feedback Shift Register (LFSR) generator, SHA 512 hash function, hyperchaotic systems, and Josephus problem. LFSR generates a matrix that is used to construct the 512-bits value of the hash function. These bits are used to set the initial values and parameters of the proposed encryption algorithm. Firstly, the six dimensions (6-D) hyperchaotic system is divided into three parts, where every two equations are considered as one part. Secondly, the 1-D hyperchaotic logistic-tent system is considered as the controller to select one part. The selected part is used to generate a matrix that is XORed with the original image. Thirdly, the scrambling operation by Josephus sequences is applied to the output of the previous step by scrambling the rows and the columns according to the selected part to produce the pre-encrypted image. Finally, if the number of iterations is less than the required number which is considered as a parameter of the secret key, the previous operations will be repeated in the pre-encrypted image; otherwise, the pre-encrypted image is considered as the final cipher image. Experimental and analyses results show that the proposed algorithm has good performance in terms of high level of security, large enough key-space, tolerance to Single Event Upsets (SEU) as well as low time complexity.