Energy and charge localization in irradiated DNA.

The relation between the site of energy deposition and the site of its biological action is an important question in radiobiology. Even at 77 degrees K, evidence is clear that these two sites must be separated since energy deposition is random but specific products are formed. Several processes that may contribute to this separation are: 1) hole migration and stabilization through deprotonation to give neutral oxidation product radicals; 2) electron trapping and transfer to form specific radical anions, possibly followed by protonation to give neutral reduction product radicals; and 3) recombination of spatially separated charges or radicals. These microscopic processes will be reviewed critically in an analysis using electron paramagnetic resonance spectroscopy (EPR) evidence for and against long-range transfer of energy and/or charge in frozen, hydrated DNA.     

Robust wavelet neuro control for linear brushless motors

Design, simulation and experimental implementation of a wavelet basis function network learning controller for linear brushless dc motors (LBDCM) are considered. Stability robustness with position tracking is the primary concern. The proposed controller deals mainly with external disturbances, e.g. nonlinear friction force and payload variation in motion control of linear motors. It consists of two parts, one is a state feedback component, and the other one is a learning feedback component. The state feedback controller is designed on the basis of a simple linear model, and the learning feedback component is a wavelet neural controller. The attenuation effect of wavelet neural networks on friction force is first verified by the numerical method. The learning effect of wavelet neural networks on friction force is also shown in the numerical results. Then, a wavelet neural network is applied on a real LBDCM to on-line suppress the friction force, which may be variable due to the different lubrication. The effectiveness of the proposed control schemes is demonstrated by simulated and experimental results.     

Performance characteristics of lithium ion cells at low temperatures

The low temperature charge and discharge characteristics of experimental MCMB-Li/sub x/Ni/sub y/Co/sub 1-y/O/sub 2/ cells containing different electrolytes were investigated. The use of low ethylene carbonate (EC)-content electrolyte formulations has resulted in good discharge performance to temperatures as low as -40/spl deg/C. The effect of charge voltage and charge current upon the individual electrode potentials at low temperature was investigated using the three electrode cells (containing lithium reference electrodes). In some cases, lithium plating was observed to occur upon low temperature charge, and found to be facilitated by high charge voltages, high charge currents, and poor anode kinetics. Electrochemical characterization of the cells has helped to establish the conditions under which lithium plating can occur by providing information regarding the polarization effects present at each electrode.     

Improved multilevel quantization for detection of narrowbandsignals

Nearly optimum quantization levels for multileveled quantizers in radar receivers and distributed-detection are calculated for preassigned false-alarm probability Q₀ by maximizing the detection probability Q_d after replacing both Q ₀ and (1-Q_d) by the saddlepoint approximations. Narrowband signals of random phase and with both fixed and Rayleigh-fading amplitudes in Gaussian noise are treated, and the loss in signal detectability incurred by quantization is estimated     

Interaction of artificially injected plasma flows with ionospheric plasma

Results of rocket experiments on study of plasma flows (PF) artificially injected by sources separated from vehicles and their effect on medium parameters in ionosphere at altitudes 160:230 km are presented.PF were injected comprising lithium ions with velocities 1,2 x 10⁴ m/sec. and cesium-potassium ions with velocities (1,4–1,5)x10³ m/sec. Mass flow rate in case of lithium PS is 2 mg/sec, and in case of cesium-potassium PS is 0,2 g/sec. During experiments mass-spectrometer measurements of ion medium content in ranges of different ion masses were held, disturbancies of electric fields with frequencies up to 20 kHz and electron flows with energies 0,7keV, 4,6keV and over 40 keV were controlled at distancies from 150m to (500–600)m between plasma source and scientific equipment.     

Temporal decorrelation of X-band backscatter from wind-influencedvegetation

The temporal decorrelation characteristics of X-band radar backscatter from wind-influenced vegetation were investigated using a short-range CW radar. Radar reflectance data were gathered on various types of individual trees from a distance of approximately 30 m. The windspeed was monitored during each measurement, which lasted 5 s. The crown cover and the mean leaf area of the trees were also recorded. Autocovariance plots were generated for each measurement, from which the decorrelation time was estimated. As expected, the return signals decorrelated faster at higher wind speeds. However, the decorrelation time was also found to depend on the tree type, tree structure, and leaf cover characteristics. Measured decorrelation times for moderate winds (7-9 m/s) were often between 40-60 ms, although the lowest decorrelation time measured under these conditions was 14 ms for the Eastern Cottonwood. In lighter winds (1-4 m/s), decorrelation times were much longer, and there was substantial spread in the data     

Microprocessor smart cards with fingerprint user authentication

Due to the great increase in Information Technology (IT) systems where user authentication is needed, security in those systems relies on using PINs or passwords. During recent years, the scientific community has been trying to improve biometric techniques to be accepted as an alternative to other user authentication schemes. One of the sectors where user identity must be verified, is the identification cards sector. In fact, if great security wants to be achieved, smart cards should be used. But cardholder verification is performed using Card Holder Verification Keys (CHV-Keys), which are PIN-based. The authors are trying to integrate fingerprint verification inside a smart card, following their works in the past. The fingerprint scheme used is shown, and the work to achieve the integration inside a commercial smart card is detailed.     

Multiple moving target detection and trajectory estimation using a single SAR sensor

A novel methodology is presented for determining the velocity and location of multiple moving targets using a single strip-map synthetic aperture radar (SAR) sensor. The so-called azimuth position uncertainty problem is therefore solved. The method exploits the structure of the amplitude and phase modulations of the returned echo from a moving target in the Fourier domain. A crucial step in the whole processing scheme is a matched filtering, depending on the moving target parameters, that simultaneously accounts for range migration and compresses two-dimensional signatures into one-dimensional ones without losing moving target information. A generalized likelihood ratio test approach is adopted to detect moving targets and derive their trajectory parameters. The effectiveness of the method is illustrated with synthetic and real data covering a wide range of targets velocities and signal-to-clutter ratios (SCRs). Even in the case of parallel to platform moving target motion, the most unfavorable scenario, the proposed method yields good results for, roughly, SCR > 10 dB.     

Avionics data buses: an overview

An overview of military avionics data buses and their applications, with the emphasis on optical fiber networking techniques. The evolution of military avionics data buses is discussed. The development trend actually reflects an increasing demand on such data buses, which requires the change from low-speed to high-speed transmissions, from single-rate to dual-rate operations, and from centralized control to distributed control. Recent progress in military avionics networks is described.     

Evaluation of light emitting diode characteristics for a space-based plant irradiation source.

Light emitting diodes (LEDs) are a promising irradiation source for plant growth in space. Improved semiconductor technology has yielded LED devices fabricated with gallium aluminum arsenide (GaAlAs) chips which have a high efficiency for converting electrical energy to photosynthetically active radiation. Specific GaAlAs LEDs are available that emit radiation with a peak wavelength near the spectral peak of maximum quantum action for photosynthesis. The electrical conversion efficiency of installed systems (micromole s-1 of photosynthetic photons per watt) of high output LEDs can be within 10% of that for high pressure sodium lamps. Output of individual LEDs were found to vary by as much as 55% from the average of the lot. LED ratings, in mcd (luminous intensity per solid angle), were found to be proportional to total photon output only for devices with the same dispersion angle and spectral peak. Increasing current through the LED increased output but also increased temperature with a consequent decrease in electrical conversion efficiency. A photosynthetic photon flux as high as 900 micromoles m-2 s-1 has been produced on surfaces using arrays with LEDs mounted 7.6 mm apart, operating as a current of 50 mA device-1 and at an installed density of approximately 17,200 lamps m-2 of irradiated area. Advantages of LEDs over other electric light sources for use in space systems include long life, minimal mass and volume and being a solid state device.