Recent advances in lunar base simulation

This article reports about the results of the latest computer runs of a lunar base simulation model. The lunar base consists of 20 facilities for lunar mining, processing and fabrication. The infrastructure includes solar and nuclear power plants, a central workshop, habitat and farm. Lunar products can be used for construction of solar power systems (SPS) or other spacecraft at several space locations. The simulation model evaluates the mass, energy and manpower flows between the elements of the system as well as system cost and cost of products on an annual basis for a given operational period. The 1983 standard model run over a fifty-years life cycle (beginning about the year 2000) was accomplished for a mean annual production volume of 78 180 Mg of hardware products for export resulting in average specific manufacturing cost of 8.4 $/kg and total annual cost of 1.25 billion dollars during the life cycle. The reference space transportation system uses LOX/LH₂ propulsion for which at the average 210 500 Mg LOX per year is produced on the moon. The sensitivity analysis indicates the importance of bootstrapping as well as the influence of market size, space transportation cost and specific resources demand on the mean lunar manufacturing cost. The option using lunar resources turns out to be quite attractive from the economical viewpoint. Systems analysis by this lunar base model and further trade-offs will be a useful tool to confirm this.     

The evolution of massive stars; an observational viewpoint

The review is a discussion of observationally deduced values of the masses, mass-loss rates, temperatures, luminosities and element abundances for the most massive stars. The comparison of these quantities with theoretical calculations is also discussed, in terms of our present understanding of their evolution.     

Rare observation of daytime whistlers at very low latitude (L = 1.08)

The source region and propagation mechanism of low latitude whistlers (Geomag. lat. <30°) have puzzled scientific community for last many decades. In view of recent reports, there is consensus on the source region of low latitude whistlers in the vicinity of the conjugate point. But the plausible conditions of ionospheric medium through which they travel are still uncertain. In addition to that, the whistlers in daytime are never observed at geomagnetic latitudes less than 20°. Here, for the first time, we present a rare observations of whistlers during sunlit hours from a very low-latitude station Allahabad (Geomag. Lat: 16.79°N, L = 1.08) in India on 04 February 2011. More than 90 whistlers are recorded during 1200–1300 UT during which the whole propagation path from lightning source region to whistler observation site is under sunlit. The favorable factors that facilitated the whistlers prior to the sunset are investigated in terms of source lightning characteristics, geomagnetic and background ionospheric medium conditions. The whistler activity period was found to be geomagnetically quiet. However, a significant suppression in ionospheric total electron content (TEC) compared to its quiet day average is found. This shows that background ionospheric conditions may play a key role in low latitude whistler propagation. This study reveals that whistlers can occur under sunlit hours at latitudes as low as L = 1.08 when the source lightning and ionospheric medium characteristics are optimally favorable.     

基于ECSS标准的航天器姿轨控系统内1553B总线数据协议设计

摘要： 国内外航天器姿轨控系统广泛应用基于1553B内总线的体系结构.针对国内航天器姿轨控系统内部1553B总线数据协议不统一带来的可集成性、可扩展性和通用性差的问题,本文设计了基于ECSS标准的姿轨控系统内1553B数据总线协议,从姿轨控系统内部总线数据业务需求分析出发,提出了四层结构的数据协议体系结构,重点介绍了在应用支持层和链路服务层应用ECSS标准的总线协议设计,并说明了协议的应用情况.应用该国际通用的标准协议,有助于实现国内航天器姿轨控系统内1553B总线数据协议的标准化,进而提升姿轨控系统体系结构的可集成性、可扩展性、以及星载设备(含软件)的通用化.     

Ionosphere modelling for Galileo single frequency users: Illustration of the combination of the NeQuick model and GNSS data ingestion

The ionospheric effect remains one of the main factors limiting the accuracy of Global Navigation Satellite Systems (GNSS) including Galileo. For single frequency users, this contribution to the error budget will be mitigated by an algorithm based on the NeQuick global ionospheric model. This quick-run empirical model provides flexible solutions for combining ionospheric information obtained from various sources, from GNSS to ionosondes and topside sounders. Hence it constitutes an interesting simulation tool not only serving Galileo needs for mitigation of the ionospheric effect but also widening the use of new data.     

Cycle slip detection using multi-frequency GPS carrier phase observations: A simulation study

The detection and repair of the cycle slip or gross error is a key step for high precision global positioning system (GPS) carrier phase navigation and positioning due to interruption or unlocking of GPS signal. A number of methods have been developed to detect and repair cycle slips in the last two decades through cycle slip linear combinations of available GPS observations, but such approaches are subject to the changing GPS sampling and complex algorithms. Furthermore, the small cycle slip and gross error cannot be completely repaired or detected if the sampling is quite longer under some special observation conditions, such as Real Time Kinematic (RTK) positioning. With the development of the GPS modernization or Galileo system with three frequencies signals, it may be able to better detect and repair the cycle slip and gross error in the future. In this paper, the cycle slip and gross error of GPS carrier phase data are detected and repaired by using a new combination of the simulated multi-frequency GPS carrier phase data in different conditions. Results show that various real-time cycle slips are completely repaired with a gross error of up to 0.2 cycles.     

MAP estimation of target manoeuvre sequence with theexpectation-maximization algorithm

Two algorithms are derived for the problem of tracking a manoeuvring target based on a sequence of noisy measurements of the state. Manoeuvres are modeled as unknown input (acceleration) terms entering linearly into the state equation and chosen from a discrete set. The expectation maximization (EM) algorithm is first applied, resulting in a multi-pass estimator of the MAP sequence of inputs. The expectation step for each pass involves computation of state estimates in a bank of Kalman smoothers tuned to the possible manoeuvre sequences. The maximization computation is efficiently implemented using the Viterbi algorithm. A second, recursive estimator is then derived using a modified EM-type cost function. To obtain a dynamic programming recursion, the target state is assumed to satisfy a Markov property with respect to the manoeuvre sequence. This results in a recursive but suboptimal estimator implementable on a Viterbi trellis. The transition costs of the latter algorithm, which depend on filtered estimates of the state, are compared with the costs arising in a Viterbi-based manoeuvre estimator due to Averbuch, et al. (1991). It is shown that the two criteria differ only in the weighting matrix of the quadratic part of the cost function. Simulations are provided to demonstrate the performance of both the batch and recursive estimators compared with Averbuch's method and the interacting multiple model filter     

ISCCP cloud analysis algorithm intercomparison

The International Satellite Cloud Climatology Project (ISCCP) will provide a uniform global climatology of satellite-measured radiances and derive a climatology of cloud radiative properties from these radiances. For this purpose, a pilot study of cloud analysis algorithms was initiated to define a state-of-the-art algorithm for ISCCP. This study compared the results of applying the nine different algorithms to the same satellite radiance data. The comparison allowed for a sharper understanding of the process of detecting clouds and shows that all algorithms can be improved by better information about clear sky radiance values (essentially equivalent to surface property information) and by better understanding of cloud size distribution variations. The dependence of all methods on cloud size distribution led to selection of an advanced bispectral threshold technique for ISCCP because this method is currently better understood and more developed. Further research on cloud algorithms is clearly suggested by these results.     

Model QA3000 Q-Flex accelerometer high performance test results

Q-Flex quartz flexure suspension technology has evolved to produce a world class accelerometer with thousands of units delivered in 1991. The Sundstrand Model QA3000 Q-Flex design achieves a new level of inertial grade performance while maintaining a competitive market price. The specification for the QA3000, supported by actual performance data, depicts performance characteristics superior in both bias and scale factor. Long term measurements display bias and scale factor repeatability obtained across temperature over a period of three years. These data exhibit improved thermal behavior with reduced errors. Reaction time and radiation data highlight the performance of the hybrid position detector circuit