疲劳裂纹扩展速率da/dN的蒙特卡罗模拟

用蒙特卡罗法模拟分析疲劳裂纹扩展速率,确定了算式中的参数分布规律及相关性。通过计算数据与试验数据的对比分析,证明蒙特卡罗法模拟结果合理、可靠。     

Testing the three-dimensional IRI-SIRMUP-P mapping of the ionosphere for disturbed periods

This paper describes the three-dimensional (3-D) electron density mapping of the ionosphere given as output by the assimilative IRI-SIRMUP-P (ISP) model for three different geomagnetic storms. Results of the 3-D model are shown by comparing the electron density profiles given by the model with the ones measured at two testing ionospheric stations: Roquetes (40.8°N, 0.5°E), Spain, and San Vito (40.6°N, 17.8°E), Italy. The reference ionospheric stations from which the autoscaled foF2 and M(3000)F2 data as well as the real-time vertical electron density profiles are assimilated by the ISP model are those of El Arenosillo (37.1°N, 353.3°E), Spain, Rome (41.8°N, 12.5°E), and Gibilmanna (37.9°N, 14.0°E), Italy. Overall, the representation of the ionosphere made by the ISP model is better than the climatological representation made by only the IRI-URSI and the IRI-CCIR models. However, there are few cases for which the assimilation of the autoscaled data from the reference stations causes either a strong underestimation or a strong overestimation of the real conditions of the ionosphere, which is in these cases better represented by only the IRI-URSI model. This ISP misrepresentation is mainly due to the fact that the reference ionospheric stations covering the region mapped by the model turn out to be few, especially for disturbed periods when the ionosphere is very variable both in time and in space and hence a larger number of stations would be required. The inclusion of new additional reference ionospheric stations could surely smooth out this concern.     

一种在SAR图像中进行目标识别的多尺度模型

本文基于SAR相干成像的原理，利用当图像分辨率改变时，自然景物和人工目标班点模式变化方式的不同，提出了一种从自然景物中识别人工目标的多尺度模型，并研究了此模型在不同分辨率图像中的性质及应用。     

Recursive mode star identification algorithms

Star identification can be accomplished by several different available algorithms that identify the stars observed by a star tracker. However, efficiency and reliability remain key issues and the availability of new active pixel cameras requires new approaches. Two novel algorithms for recursive mode star identification are presented here. The first approach is derived by the spherical polygon search (SP-search) algorithm, it was used to access all the cataloged stars observed by the sensor field-of-view (FOV) and recursively add/remove candidate cataloged stars according to the predicted image motion induced by camera attitude dynamics. Star identification is then accomplished by a star pattern matching technique which identifies the observed stars in the reference catalog. The second method uses star neighborhood information and a catalog neighborhood pointer matrix to access the star catalog. In the recursive star identification process, and under the assumption of "slow" attitude dynamics, only the stars in the neighborhood of previously identified stars are considered for star identification in the succeeding frames. Numerical tests are performed to validate the absolute and relative efficiency of the proposed methods.     

真空电子辐照对碳纤维/ 氰酸酯复合材料的影响

利用空间带电粒子模拟设备模拟真空电子辐照环境,研究真空电子辐照条件下碳纤维/氰酸酯复合材料层间剪切强度和质量损失率变化规律,并利用XPS和SEM对辐照前后复合材料表面性质和断口形貌进行分析和表征。结果表明:150 keV真空电子辐照作用对碳纤维/氰酸酯复合材料表面影响较大,随着真空电子辐照注量增加复合材料质量损失率先快速增加后趋于平缓,而层间剪切强度先增加后略有降低。     

折叠机翼变体飞机非对称变形控制效率分析

折叠机翼变体飞机变形量大,变形引起的气动参数变化显著,提出一种将非对称变形作为操纵输入的控制方案,研究非对称变形的控制效率和有效区间。首先建立能够完整描述变形过程的非线性动力学方程和气动力模型;然后基于非对称变形控制方法建立一种非对称变形操纵模型;最后通过与常规操纵面效率对比和仿真的动态响应总结出非对称变形操纵的最大变形操纵有效区间。结果表明:在较低飞行速度下非对称变形操纵效率高,非对称变形操纵能够在基准折叠角度90°附近提供最高的滚转操纵效率。     

The Rosat mission

The primary scientific objective of the ROSAT mission is to perform the first all sky survey with an imaging X-ray telescope leading to an improvement in sensitivity by several orders of magnitude compared with previous surveys. Consequently a large number of new sources (> 10⁵) will be discovered and located with an accuracy of 1 arcmin. After completion of the survey which will take about half a year the instrument will be used for detailed observations of selected targets.The X-ray telescope consists of a fourfold nested Wolter type I mirror system with 80 cm aperture and 240 cm focal length, and three focal plane detectors. In the baseline version these will be imaging proportional counters (0.1 – 2 keV) providing a field of view of 2⁰ × 2⁰.     

Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

在实时嵌入式环境下利用电子盘实现大容量数据记录的软件设计研究

嵌入式环境和实时操作系统目前广泛应用于航空领域。本文在介绍嵌入式系统的基础上,重点对实时多任务环境下大容量数据记录的实现方式进行了研究和利用,最后展望了电子盘实时多任务系统中记录大容量数据的前景。