Using open networking standards over MIL-STD-1553 networks

Over the past several decades, the MIL-STD-1553 networking technology has found use in a number of military and aerospace platforms, including applications on aircraft, ships, tanks, missiles, satellites, and even the International Space Station. In developing software applications for these platforms, the use of modern, open networking standards such as TCP/IP is often preferable. The Internet Protocol (IP) provides communications routing, and the Transmission Control Protocol (TCP) provides reliable delivery to the application level. Furthermore, higher-level protocols such as the HyperText Transfer Protocol (HTTP), the File Transfer Protocol (FTP), etc. can be utilized in a TCP/IP environment. Though these open communications standards are preferable for many situations, the MIL-STD-1553B standard does not immediately lend itself to TCP/IP communications. One of the reasons for this is the fundamental difference between the MIL-STD-1553B networking standard, which relies on a bus controller to control communications and other data link layer networking protocols such as IEEE 8023 (Ethernet) which are Carrier Sense Multiple Access (CSMA) networks, and are thus decentralized. Despite differences in MIL-STD-1553B networking and more traditional data link layer networking protocols, there is nothing fundamentally preventing IP communication over a 1553 network. We have implemented a method of encapsulating IP datagrams within MDL-STD-1553B data messages that allows for transparent use of Internet Protocol (IP) APIs at the application level. Our system allows traditional 1553 messages to also be transported over the network, and even allows traditional messages to take a higher transmission priority over IP traffic. We analyze the advantages of such a system and the performance level we achieved with our implementation of this concept.     

High resolution time profile of decimetric type-III bursts

Type-III bursts are signatures of the electron beams accelerated during the solar flares, their observation and investigation provide information of the acceleration processes, the characteristics of the exciting agent and the acceleration site. The Brazilian Solar Spectroscope (BSS), in operation at INPE, Brazil, have recorded type-III radio bursts in decimetric range (2050–2250 MHz) with high time resolution of 20 ms. Decimetric reverse drift bursts are possibly generated in a dense loop by electron beams travelling towards the photosphere. Hence their time profiles should carry signatures of the density inhomogenities in the loop. Here the temporal and spectral characteristics of decimetric type-III bursts are presented.     

Defense radar development in Australia: 1939 to the present

Defense radar research and development in Australia is today largely, but not exclusively, confined within Australia's Defense Science and Technology Organization, DSTO, and its R&D collaborators in universities. Radar has a long history in Australia, dating back to World War II links with British defense radar development, and radar R&D continues to be an important focus within DSTO. It is impossible, in the context of a brief conference paper, to give other than the broadest-brush picture of Australian radar development over a half-century or more. So the approach taken is necessarily highly selective and focuses specifically on several illustrative development projects, in an attempt to convey the flavor of national radar research priorities, the way they drive R&D and likely future directions. Despite the escalating requirement for a national skills base in defense radar and allied technologies, there are currently legitimate concerns about the robustness of this base. Recruitment of high-caliber researchers into the field of radar and management of radar research careers are issues currently presenting major challenges. A number of initiatives are in place linking DSTO with university research; a recent effort to enhance the stature and visibility of radar research in Australia is the establishment of the Centre of Expertise in Microwave Radar as a joint venture between DSTO and Adelaide University.     

The Planets and Titan Observed by ISO

Infrared spectroscopic observations of planets and Saturn's satellite Titan with the Infrared Space Observatory led to many significant discoveries that improved our understanding on the formation, physics and chemistry of these objects. The prime results achieved by ISO are: (1) a new and consistent determination of the D/H ratios on the giant planets and Titan; (2) the first precise measurement of the ¹⁵N/¹⁴N ratio in Jupiter, a valuable indicator of the protosolar nitrogen isotopic ratio; (3) the first detection of an external oxygen flux for all giant planets and Titan; (4) the first detection of some stratospheric hydrocarbons (CH₃, C₂H₄, CH₃C₂H, C₄H₂, C₆H₆); (5) the first detection of tropospheric water in Saturn; (6) the tentative detection of carbonate minerals on Mars; (7) the first thermal lightcurve of Pluto. Based on observations with ISO, an ESA project with instruments funded by ESA Member States (especially the PI countries: France, Germany, The Netherlands, and the United Kingdom), and with the participation of ISAS and NASA.     

Ultra triple-junction high-efficiency solar cells

Solar cells suitable for the space environment must combine high-efficiency, high energy density, and radiation hardness in a manufacturable design. As improvement in one performance parameter usually results in degradation in one or more of the remaining parameters, careful optimization is required to enhance overall performance. The ultra triple-junction cell developed builds upon the established success of the fully qualified improved triple-junction cell currently in production. In the ultra triple-junction cell configuration, improved robustness and efficiency after radiation exposure augment a cell design expected to deliver 28% beginning-of-life efficiency in production.     

Adaptive image segmentation using genetic and hybrid search methods

This paper describes an adaptive approach for the important image processing problem of image segmentation that relies on learning from experience to adapt and improve the segmentation performance. The adaptive image segmentation system incorporates a feedback loop consisting of a machine learning subsystem, an image segmentation algorithm, and an evaluation component which determines segmentation quality. The machine learning component is based on genetic adaptation and uses (separately) a pure genetic algorithm (GA) and a hybrid of GA and hill climbing (HC). When the learning subsystem is based on pure genetics, the corresponding evaluation component is based on a vector of evaluation criteria. For the hybrid case, the system employs a scalar evaluation measure which is a weighted combination of the different criteria. Experimental results for pure genetic and hybrid search methods are presented using a representative database of outdoor TV imagery. The multiobjective optimization demonstrates the ability of the adaptive image segmentation system to provide high quality segmentation results in a minimal number of generations     

Nature's efficient energy production, storage, and data processing

Converting the solar energy received on the surface of the Earth has not been practical with heat engines because of the low density of this energy. On a clear bright day in the summer, the sun generally delivers less than 80 W per square foot. Also, heat engines are prohibited from exceeding the Carnot-cycle efficiency limit. On the other hand, plants perform their energy conversion electrochemically, and, hence, are not limited by the Carnot-cycle. They use solar energy to produce useful fuels that range from corn-cobs and maple syrup to pitch and firewood. However, they have an extremely complicated process control that uses blue and red parts of the visible solar spectrum to extract hydrogen from water and carbon from carbon dioxide to make hydrocarbons. They do not need precious-metal catalysts; however they run complex data processing programs in which stored instructions control electrochemical reactions and also cause growth and production of needed products to occur when needed.     

PWM full-bridge converter with natural input power factor correction

A pulsewidth modulated (PWM) full-bridge converter that simultaneously performs input power factor correction (PFC) and DC-DC conversion is proposed. The converter is the same as the standard voltage-fed PWM full-bridge converter with a diode-bridge low-pass filter front end, but with a slight modification that results in an improvement in power factor that is sufficient to satisfy the EN61000-3-2 requirements for electrical equipment. The operation of the converter is explained and analyzed, and the results of the analysis are used to determine the converter's steady-state characteristics, which are discussed in detail. A design procedure for the selection of components is then derived and demonstrated with an example. The feasibility of the converter and its ability to satisfy EN61000-3-2 requirements on electrical equipment is shown with results obtained from an experimental prototype.     

3D Coronal structures and their evolutions measured by Stereoscopy,consequences for Space Weather and the STEREO mission

We are discussing methods of stereoscopic 3D reconstruction of coronal loops structures. In our most sophisticated method we fit loops observed with SOHO/EIT to a set of shape parameters including the internal twist of the loops field lines. We define this twist as the number of turns of the field line around a torus axis between the footpoints of the loops. Twist numbers of the order 0–2 are observed. We observe the emergence of an Active Region with twisted loops which detwist as they expand. The same correlation between detwisting and expansion is observed with filaments in relation to CME formations. On longer time scale, loops seem to accumulate twist, perhaps due to differential rotation. Rapid losses of twist temporarily correlate with flares. From our analysis, we expect that the internal twist of coronal structures will play an important role for the space weather forecast. This revised version was published online in August 2006 with corrections to the Cover Date.     

Observations of Magnetospheric Waves and their Relation to Precipitation

Magnetospheric wave observations are discussed from the viewpoint of their potential importance for precipitation of charged particles into the auroral zones. While wave processes are a fundamental part of magnetospheric plasma physics, occurring most of the time in most of the magnetospheric regions, their direct role in and relative importance for auroral precipitation are not easy to assess. The role of the waves varies from one spatial region to another and is very different for electrons and ions. Furthermore, the distinction between wave processes and other precipitation mechanisms is not at all straightforward. This review focuses on four main topics: The problem of diffuse electron precipitation, the recent surprise on the detailed structure of broad-banded electrostatic noise in the plasma sheet boundary layer, ion precipitation through electromagnetic ion cyclotron waves, and the role of low-altitude waves in precipitation. It is concluded that, while the observational status of high-altitude ion cyclotron waves is reasonably good, in most areas more thorough studies of existing data as well as refined observations are very much needed. Successful observational studies are to be carried out jointly with theoretical work as well as with studies on the large-scale context of the often localized wave processes. This is especially important when interests are moving toward more nonlinear phenomena, such as shocks, double layers, or strong quasi-static gradients, where a strict adherence to classical wave concepts is becoming more and more diffuse and less motivated.