High velocity impact characterization of Al alloys for oblique impacts

This paper describes the experimental and computational analyses of a high velocity aluminum projectile impact on an Al6061-T6 spacecraft inner wall at different oblique angles. Al2017-T4 spherical projectiles of 5.56 mm in diameter and 0.25 g in weight were chosen within the velocity range of 1000±200 m/s due to the limitation of the light gas gun. The energy absorbed was calculated by measuring the velocities before and after impact on the inner wall. The energy absorbed by the wall and the remaining energy carried by the projectile helped to estimate the severity of further damage to inner components. Afterwards, validation was done by using the commercially available software LS-DYNA with a dedicated SPH. On average, a 10% energy absorption difference between experimentation and simulation was found. By using C-SCAN, the damage area proportion of the total inner wall to impact penetration hole area was found to be on average 6%, 26% and 53% greater than the projectile cross sectional area for the oblique angle impacts of 30°, 45°, and 60°, respectively. These findings helped to understand the relationship between the oblique impact event and the damage area on a spacecraft inner wall along with space debris cloud propagation and comparison with experimental results using LS-DYNA.     

Mean winds of the mesosphere and lower thermosphere (60–110 km): A global distribution from radar systems (MF,Meteor, VHF)

During the last decade a large number of radars (～12) have been developed, which have produced substantial quantities of tidally-corrected mean winds data. The distribution of the radars is not global, but many areas are well covered: the Americas with Poker Flat (65°N), Saskatoon (52°N), Durham (43°N), Atlanta (34°N), Puerto Rico (18°N); Europe with Kiruna (68°), Garchy (47°N) and Monpazier (44°N); and Oceania with Christchurch (44°S), Adelaide (35°S), Townsville (20°S), and Kyoto (35°N). Zonal and meridional wind height-time cross-sections from $\text{60}\text{80}$ km (MF/Meteor Radar) to ～110 km have been prepared for the last 5–6 years. They are compared with cross-sections from CIRA-72 for zonal winds, and Groves (1969) for meridional winds.It is shown that while CIRA-72 is still a useful model for many purposes, significant differences exist between it and the new radar data. The latter demonstrate important seasonal, latitudinal, longitudinal and hemispheric variations. The new meridional cross-sections are of great value. The common features with Groves (1969) are the equatorward cells in summer near 85 km; however their strength (～10 ms^?1) and size are less. Systematic and somewhat different variations emerge at higher (?52°N) and middle (35–44°) latitudes.     

A balloon-borne sun-tracking multichannel photometer for atmospheric aerosol measurements

A balloon borne multichannel photometer for measurement of atmospheric scattering in the near ultraviolet and the visible wavelength regions has been developed at the Physical Research Laboratory, Ahmedabad for study of the size distribution and number density of aerosols at tropospheric and lower stratospheric altitudes. The instrumentation involves tracking the sun in elevation and scanning in azimuth. The payload was recently flown on a 100 kg. balloon from the Hyderabad Balloon Facility on 18 April 1984. The balloon reached a float altitude of 35 km and good quality data has been obtained from an altitude of 6 km upto float altitude. Data analysis is still in progress. The present paper details the instrument design and presents a few illustrations of the instrument performance from this flight.     

Detection of satellite attitude sensor faults using the UKF

A novel fault detection (FD) method for nonlinear systems using the residuals generated by the unscented Kalman filter (UKF) is proposed. The errors of the UKF are derived and sufficient conditions for the convergence of the UKF are presented. As the local approach is a powerful statistical technique for detecting changes in the mean of a Gaussian process, it is used to devise a hypothesis test to detect faults from residuals obtained from the UKF. Further, it is demonstrated that the selection of a sample number is important in improving the performance of the local approach. To illustrate the implementation and performance of the proposed technique, it is applied to detect sensor faults in the measurement of satellite attitude.     

Synthetic Environments for Simulated Missions

Synthetic environments offer Space Flight projects an opportunity to perform rapid, comprehensive, and rigorous modeling of the critical elements of a mission in order to compute quantitative measures of design performance, associated risk, and actual mission utility value. Significantly, these studies can be performed early in the mission cycle. These synthetic terrains are generated on parallel, high-performance computers and served to remote simulations at near-interactive speeds. The terrain creation uses a realistic sequence of physical phenomena such as cratering and dusting with parametric control of features such as surface roughness and rock density. Terrain resolution may be arbitrary but typically ranges from 0.01 to 10 meters. The terrain server has been used for two rover simulations, one using the actual Sojourner autonomy flight code, and the other a more general algorithm. Monte Carlo studies of rover designs interacting with synthetic environments were executed in parallel to quickly compute performance statistics and risk estimates.     

A low cost steerable radio-telescope

We present the technical characteristics of a low-cost radio telescope for solar/non solar observations at decimetric (1200–1700 MHz) and centimetric (2700 and 5000 MHz) wavelengths known as Brazilian Decimetric Array (BDA). The technical specifications of the antenna, tracking system, log-periodic feed, preamplifier and the frequency-synthesised receiver with a Single Side Band (SSB) video output of 2.5 MHz are given.     

Science rational for MIERS/IRI collaboration

In this paper, we will shortly highlight some of the aspects that COST Action 296 on Mitigation of Ionospheric Effects on Radio Systems (MIERS) and International Reference Ionosphere (IRI) have in common in an attempt to define science rationale for collaboration between these two international projects.     

Viewing radiation signatures of solar energetic particles in interplanetary space

A current serious limitation on the studies of solar energetic particle (SEP) events is that their properties in the inner heliosphere are studied only through in situ spacecraft observations. Our understanding of spatial distributions and temporal variations of SEP events has come through statistical studies of many such events over several solar cycles. In contrast, flare SEPs in the solar corona can be imaged through their radiative and collisional interactions with solar fields and particles. We suggest that the heliospheric SEPs may also interact with heliospheric particles and fields to produce signatures which can be remotely observed and imaged. A challenge with any such candidate signature is to separate it from that of flare SEPs. The optimum case for imaging high-energy (E > 100 MeV) heliospheric protons may be the emission of π⁰-decay γ-rays following proton collisions with solar wind (SW) ions. In the case of E > 1 MeV electrons, gyrosynchrotron radio emission may be the most readily detectible remote signal. In both cases we may already have observed one or two such events. Another radiative signature from nonthermal particles may be resonant transition radiation, which has likely already been observed from solar flare electrons. We discuss energetic neutrons as another possible remote signature, but we rule out γ-ray line and 0.511 MeV positron annihilation emission as observable signatures of heliospheric energetic ions. We are already acquiring global signatures of large inner-heliospheric SW density features and of heliosheath interactions between the SW and interstellar neutral ions. By finding an appropriate observable signature of remote heliospheric SEPs, we could supplement the in situ observations with global maps of energetic SEP events to provide a comprehensive view of SEP events.     

The effects of composting on the nutritional composition of fibrous bio-regenerative life support systems (BLSS) plant waste residues and its impact on the growth of Nile tilapia (Oreochromis niloticus)

Utilization of bio-regenerative life support systems (BLSS) plant waste residues as a nutritional source by Nile tilapia (Oreochromis niloticus) has proven problematic as a result of high concentrations of fibrous compounds in the plant waste residues. Nutritional improvement of plant waste residues by composting with the oyster mushroom (Pleurotus ostreatus), and the effects on growth and nutrient utilization of Nile tilapia fed such residues were evaluated. Five Nile tilapia (mean weight = 70.9 ± 3.1 g) were stocked in triplicate aquaria and fed one of two experimental diets, cowpea (CP) and composted cowpea (CCP), twice daily for a period of 8 weeks. Composting of cowpea residue resulted in reduced concentrations of nitrogen-free extract, hemi-cellulose and trypsin inhibitor activity, though trypsin inhibitor activity remained high. Composting did not reduce crude fiber, lignin, or cellulose concentrations in the diet. No significant differences (P < 0.05) were observed in weight gain, specific growth rate, survival rate, daily consumption, and food conversion ratio between tilapia fed CP and CCP. These results suggest that P. ostreatus is not a suitable candidate for culture in conjunction with the culture of Nile tilapia. Additional work is needed to determine what, if any, benefit can be obtained from incorporating composted residue as feed for Nile tilapia.     

Sodium and potassium uptake of Ulva – Application of marine macro-algae for space agriculture

The treatment of sodium, Na, and potassium, K, presents a challenge in space agriculture material recycling, as humans require Na and plants cannot grow at high Na concentrations. Hence, we are proposing the use of marine macro-algae to harvest K and other minerals from composted human waste. Ulva was selected for this feasibility study, since it tolerates a wide range of salinity levels. Growth capability of Ulva was examined under various total salinity levels and proportions of Na and K in the incubation medium. A homeostatic feature of Ulva was found in its intra-cellular concentration of Na and K, and in the intra-cellular ratio between Na and K (at 0.58 ± 0.30, lower than that of human metabolic waste). Intracellular concentration of K in Ulva is 20 times higher than seawater. Because of these characteristics, Ulva is a good candidate species for space agriculture.