Dielectric properties and microwave remote sensing

The importance of the dielectric properties of earth, ocean and snow surfaces in microwave remote sensing is reviewed. Data on dielectric properties of materials in the microwave frequency range are very scarce and their behaviour is not fully understood. In this paper the need for dielectric properties of ocean and snow surfaces, the earth's surface and subsurface materials is discussed for the quantitative and qualitative interpretation of microwave remote sensing data of developing countries.     

Rotational maneuver of nonlinear uncertain elastic spacecraft

The question of attitude control and elastic mode stabilization of a spacecraft (orbiter) with beam-tip-mass-type payloads is considered. A three-axis moment control law is derived to control the attitude of the spacecraft. The derivation of the control moments acting on the spacecraft does not require any information on the system dynamics. The control law includes a reference model and a dynamic compensator in the feedback path. For damping out the elastic motion excited by the slewing maneuver, an elastic mode stabilizer is designed. The stabilization is achieved by modal velocity feedback using force and torque actuators located at the payload end of the elastic beam. Collocated actuators and sensors provide robust stabilization. Simulation results are presented to show that rotational maneuvers and vibration stabilization can be accomplished in the closed-loop systems despite the presence of model uncertainty and disturbance torque in the system     

Analysis of aggregation mechanism of erythrocytes under normal- and microgravity conditions.

Aggregation mechanism of erythrocytes under normal and microgravity conditions is analyzed from their recorded images. The video data is analyzed by PC/AT based image processing system. The results show that the shape of individual erythrocytes and their formed aggregates changes significantly which may affect the formation process of aggregates under microgravity conditions.     

Energy utilization rates during shuttle extravehicular activities

The work rates or energy utilization rates during EVA are major factors in sizing of life support systems. These rates also provide a measure of ease of EVA and its cost in crew fatigue. From the first Shuttle EVA on the STS-6 mission in 1983, we have conducted 59 man-EVA and 341 man-hours of EVA. Energy utilization rates have been measured on each of these EVA. Metabolic rate was measured during each EVA using oxygen utilization corrected for suit leakage. From 1981–1987, these data were available for average data over the EVA or over large segments of the EVA. Since 1987, EVA oxygen utilization data were available at 2-minute intervals. The average metabolic rate on Shuttle EVA (194 kcal/hr.) has been significantly lower than metabolic rates during Apollo and Skylab missions. Peak rates have been below design levels, infrequent, and of short duration. The data suggest that the energy cost of tasks may be inversely related to the degree of training for the task. The data provide insight on the safety margins provided by life support designs and on the energy cost of Station construction EVA.     

Discharges in the Stratosphere and Mesosphere

In the present paper salient features of discharges in the stratosphere and mesosphere (namely sprites, halos, blue starters, blue jets, gigantic jets and elves), are discussed. The electrostatic field due to charge imbalance during lightning processes may lead to stratospheric/mesospheric discharges either through the conventional breakdown based on streamers and leaders or relativistic runaway mechanism. Most (not all) of the observed features of sprites, halos and jets are explained by this processes. Development and evolution of streamers are based on the local transient electrostatic field and available ambient electron density which dictate better probability in favor of positive cloud-to-ground discharges, and thus explains the polarity asymmetry in triggering sprites and streamers. Elves are generated by electromagnetic pulse radiated by return stroke currents of cloud-to-ground/inter-cloud discharges. Generation of the both donut and pancake shape elves are explained. Electrodynamic features of thunderstorms associated with stratospheric/mesospheric discharges are summarized including current and charge moment associated with relevant cloud-to-ground discharges. The hypothesis relating tropospheric generated gravity waves and mesospheric discharges are also discussed. Finally some interesting problems are listed.     

Simulation of depth–dose distributions for various ions in polyethylene medium

Study of depth–dose distributions for intermediate energy ion beams in tissue-like media such as polyethylene (CH₂)_n provides a good platform for further improvements in the fields of hadrontherapy and space radiation shielding. The depth–dose distributions for ¹²C ions at various energies and for light and intermediate ion beams (³He, ¹⁶O, ²⁰Ne and ²⁸Si) as well as for heavy ions ⁵⁶Fe in polyethylene were estimated by using simulation toolkit: Geant4. Calculations were performed mainly by considering two different combinations of standard electromagnetic (EM), binary cascade (BIC), statistical multifragmentation (SMF) and Fermi breakup (FB) models. The energies of the ion beams were selected to achieve the Bragg peaks at predefined position (∼60 mm) and as per their availability. Variations of peak-to-entrance ratio (from 7.44 ± 0.05 to 8.87 ± 0.05), entrance dose (from 2.89 ± 0.01 to 203.71 ± 0.63 MeV/mm) and entrance stopping power (from 3.608 to 208.858 MeV/mm, calculated by SRIM) with atomic number (Z) were presented in a systematic manner. The better peak-to-entrance ratio and less entrance dose in the region Z = 2 to 8 (i.e. ³He to ¹⁶O) may provide the suitability of the ion beams for hadrontherapy.     

Modeling urban heat islands in heterogeneous land surface and its correlation with impervious surface area by using night-time ASTER satellite data in highly urbanizing city,Delhi-India

The present study is an assessment and identification of urban heat island (UHI) in the environment of one of the fastest urbanizing city of India, Delhi Metropolis, employing satellite image of ASTER and Landsat 7 ETM+ in the thermal infrared region 3–14 μm. Temporal (2001 and 2005) ASTER datasets were used to analyze the spatial structure of the thermal urban environment subsequently urban heat island (UHI) in relation to the urban surface characteristics and land use/land cover (LULC). The study involves derivation of parameters governing the surface heat fluxes, constructing statistics of ASTER thermal infrared images along with validation through intensive in situ measurements. The average images reveal spatial and temporal variations of land surface temperature (LST) of night-time and distinct microclimatic patterns. Central Business District (CBD) of Delhi, (Connaught Place, a high density built up area), and commercial/industrial areas display heat islands condition with a temperature greater than 4 °C compared to the suburbs. The small increase in surface temperature at city level is mainly attributed to cumulative impact of human activities, changes in LULC pattern and vegetation density. In this study the methodology takes into account spatially-relative surface temperatures and impervious surface fraction value to measure surface UHI intensity between the urban land cover and rural surroundings. Both the spatial and temporal variation in surface temperature associated with impervious surface area (ISA) has been evaluated to assess the effect of urbanization on the local climate.     

Assimilation of endmember variability in spectral mixture analysis for urban land cover extraction

Variable Endmember Constrained Least Square (VECLS) technique is proposed to account endmember variability in the linear mixture model by incorporating the variance for each class, the signals of which varies from pixel to pixel due to change in urban land cover (LC) structures. VECLS is first tested with a computer simulated three class endmember considering four bands having small, medium and large variability with three different spatial resolutions. The technique is next validated with real datasets of IKONOS, Landsat ETM+ and MODIS. The results show that correlation between actual and estimated proportion is higher by an average of 0.25 for the artificial datasets compared to a situation where variability is not considered. With IKONOS, Landsat ETM+ and MODIS data, the average correlation increased by 0.15 for 2 and 3 classes and by 0.19 for 4 classes, when compared to single endmember per class.     

Simultaneous observations of some unusual whistlers and VLF hiss emission at a low L-value (L = 1.17)

The purpose of this paper is to describe some unusual whistlers (doublets and triplets) and VLF hiss emission recorded simultaneously on February 18, 1998 during nighttime at a low latitude Indian ground station Jammu (geomag. lat., 22° 26′ N; L = 1.17), and to make some discussions about their origin. The detailed structures of the observed VLF hiss emission clearly show that these emissions confined to a narrow continuous frequency band. Some times the frequency of hiss band oscillates and subsequently touches the upper edge of the first whistler component of the doublet. Detailed structures of the dynamic spectra of whistler and VLF hiss emission are briefly presented. From the dispersion analysis of the whistler doublets and triplets, it is found that the individual whistlers of the doublets and triplets simultaneously observed on the same day are one-hop whistlers having propagation path along higher and closely spaced L-values. Our result also shows that VLF hiss has been generated in the equatorial region of higher L-values. Generation and propagation mechanisms are briefly discussed.     

Variation of rain drop size distribution with rain rate at a few coastal and high altitude stations in southern peninsular India

Rain drop size distribution (DSD) was measured at four places in Southern India {Thiruvananthapuram, Kochi, Munnar and Sriharikota (SHAR)} using a Joss–Waldvogel (JW) impact type disdrometer. The data for each minute were corrected for dead time errors and rain rate was computed from the corrected data. The data for a whole month were then sorted according to rain rate (R) into several classes ranging from 0.1 to >100 mm/h. The average DSD in each class was computed, and the lognormal distribution function was fitted to the average. In all the cases, the function fitted the data very well. The fit parameters were found to have dependence on rain rate. The total number of drops (N_T), the geometric mean diameter (D_g) and the standard geometric deviation (σ) were also computed from the fit parameters. The standard geometric deviation (σ) was found to be more or less constant with rain rate at all the sites and in all months. The other two parameters (N_T and D_g) were found to vary exponentially with rain rate except in Munnar, a high altitude station. At Thiruvananthapuram, in most of the months, N_T increased exponentially with rain rate up to some value of R, which was different in different months, and then remained more or less constant or decrease slightly. In all cases, the variation of N_T and D_g was such that N_TD_g³ increased linearly with rain rate.