Estimation of optical maturity parameter for lunar soil characterization using Moon Mineralogy Mapper (M3)

Prolonged exposure of the microscopic outer layer of the lunar surface to the space environment leads to the maturation of the surface. Maturation can be quantified and it may be expressed in terms of optical maturity (OMAT). Optical maturity estimations are very much helpful in the identification and mapping of the major minerals present on the lunar regolith. Estimation of the maturation and mineral mapping using remote sensing techniques are achieved, by coupling spectral reflectance of the lunar surface with an optimized origin. The present work estimates the optical maturity and Ferrous oxide content of the Goldschmidt and Schrodinger craters, through the recalibration of the classical method of Lucey et al. (2000a) with an origin of (0.08, 1.18) and Moon Mineralogy Mapper (M3) data. The overall recalibration results assure that the craters are highly matured.     

Frequency estimation techniques for high dynamic trajectories

A comparison is presented of four different estimation techniques applied to the problem of continuously estimating the rapidly varying parameters of a sinusoidal signal, observed in the presence of additive noise. Frequency estimates are emphasized, although phase and/or frequency rate are also estimated by some of the algorithms. These parameters are related to the velocity, position, and acceleration of the maneuvering receiver or transmitter. Estimated performance at low carrier-to-noise ratios and high dynamics is investigated for the purpose of determining the useful operating range of an approximate maximum likelihood estimator, an extended Kalman filter, a cross-product automatic frequency loop and a phase-locked loop. Numerical simulations are used to evaluate performance while tracking a common trajectory exhibiting high dynamics     

A comprehensive statistical study of cloud base height using ceilometer over western India

A comprehensive statistical analysis of the cloud base height (CBH) measured by ground-based Vaisala ceilometer (CL31) has been performed to study different layers of the cloud in the lower troposphere up to 7.5?km height over Ahmedabad, western India during 2014 and 2015. The total observations (～69%) of cloud by using ceilometer show annual cloud occurrence frequency of around 64%. Seasonal variation of CBH and cloud occurrence frequency reveal that the maximum/minimum cloud cover is found during southwest (SW) Indian summer monsoon/pre-monsoon season. Three CBHs (CBH1, CBH2, and CBH3) are presented in monsoon period due to high cloud occurrence, and two CBHs (CBH1 and CBH2) are observed in other seasons due to low cloud occurrence by ceilometer over the observational site. The CBH1 (～100–2000?m) and CBH2 (500–3000?m) are observed during SW monsoon and summer season, respectively. The CBH3 is occurred usually in SW monsoon season. Moreover, the cloud cover during the day and night time shows that the occurrence of cloud is more frequent in daytime than nighttime during pre-monsoon and post-monsoon season. The statistical analysis of cloud with ground-based observations is also performed in this study that may be useful for the development/improvement of regional weather and climate models to reduce the uncertainty in the prediction.     

Wind Oscillatory and Gusting Torque Effect on a Power System

The dynamics of a wind turbine driven induction machine and the power system to which it is connected in a dispersed mode are described. The sources of disturbances are identified as ramp and low frequency cyclic turbine torque variations as a consequence of sharp fronted wind gusts and tower shadow, rotor unbalance, etc. Studies have been performed for two levels of wind energy penetration in a single area power system and in a multiarea interconnected power system. Results show that substantial wind energy penetration levels can be handled in a multiarea power system.     

Energy utilization rates during shuttle extravehicular activities

The work rates or energy utilization rates during EVA are major factors in sizing of life support systems. These rates also provide a measure of ease of EVA and its cost in crew fatigue. From the first Shuttle EVA on the STS-6 mission in 1983, we have conducted 59 man-EVA and 341 man-hours of EVA. Energy utilization rates have been measured on each of these EVA. Metabolic rate was measured during each EVA using oxygen utilization corrected for suit leakage. From 1981–1987, these data were available for average data over the EVA or over large segments of the EVA. Since 1987, EVA oxygen utilization data were available at 2-minute intervals. The average metabolic rate on Shuttle EVA (194 kcal/hr.) has been significantly lower than metabolic rates during Apollo and Skylab missions. Peak rates have been below design levels, infrequent, and of short duration. The data suggest that the energy cost of tasks may be inversely related to the degree of training for the task. The data provide insight on the safety margins provided by life support designs and on the energy cost of Station construction EVA.     

Discharges in the Stratosphere and Mesosphere

In the present paper salient features of discharges in the stratosphere and mesosphere (namely sprites, halos, blue starters, blue jets, gigantic jets and elves), are discussed. The electrostatic field due to charge imbalance during lightning processes may lead to stratospheric/mesospheric discharges either through the conventional breakdown based on streamers and leaders or relativistic runaway mechanism. Most (not all) of the observed features of sprites, halos and jets are explained by this processes. Development and evolution of streamers are based on the local transient electrostatic field and available ambient electron density which dictate better probability in favor of positive cloud-to-ground discharges, and thus explains the polarity asymmetry in triggering sprites and streamers. Elves are generated by electromagnetic pulse radiated by return stroke currents of cloud-to-ground/inter-cloud discharges. Generation of the both donut and pancake shape elves are explained. Electrodynamic features of thunderstorms associated with stratospheric/mesospheric discharges are summarized including current and charge moment associated with relevant cloud-to-ground discharges. The hypothesis relating tropospheric generated gravity waves and mesospheric discharges are also discussed. Finally some interesting problems are listed.     

Simulation of depth–dose distributions for various ions in polyethylene medium

Study of depth–dose distributions for intermediate energy ion beams in tissue-like media such as polyethylene (CH₂)_n provides a good platform for further improvements in the fields of hadrontherapy and space radiation shielding. The depth–dose distributions for ¹²C ions at various energies and for light and intermediate ion beams (³He, ¹⁶O, ²⁰Ne and ²⁸Si) as well as for heavy ions ⁵⁶Fe in polyethylene were estimated by using simulation toolkit: Geant4. Calculations were performed mainly by considering two different combinations of standard electromagnetic (EM), binary cascade (BIC), statistical multifragmentation (SMF) and Fermi breakup (FB) models. The energies of the ion beams were selected to achieve the Bragg peaks at predefined position (∼60 mm) and as per their availability. Variations of peak-to-entrance ratio (from 7.44 ± 0.05 to 8.87 ± 0.05), entrance dose (from 2.89 ± 0.01 to 203.71 ± 0.63 MeV/mm) and entrance stopping power (from 3.608 to 208.858 MeV/mm, calculated by SRIM) with atomic number (Z) were presented in a systematic manner. The better peak-to-entrance ratio and less entrance dose in the region Z = 2 to 8 (i.e. ³He to ¹⁶O) may provide the suitability of the ion beams for hadrontherapy.     

Modeling urban heat islands in heterogeneous land surface and its correlation with impervious surface area by using night-time ASTER satellite data in highly urbanizing city,Delhi-India

The present study is an assessment and identification of urban heat island (UHI) in the environment of one of the fastest urbanizing city of India, Delhi Metropolis, employing satellite image of ASTER and Landsat 7 ETM+ in the thermal infrared region 3–14 μm. Temporal (2001 and 2005) ASTER datasets were used to analyze the spatial structure of the thermal urban environment subsequently urban heat island (UHI) in relation to the urban surface characteristics and land use/land cover (LULC). The study involves derivation of parameters governing the surface heat fluxes, constructing statistics of ASTER thermal infrared images along with validation through intensive in situ measurements. The average images reveal spatial and temporal variations of land surface temperature (LST) of night-time and distinct microclimatic patterns. Central Business District (CBD) of Delhi, (Connaught Place, a high density built up area), and commercial/industrial areas display heat islands condition with a temperature greater than 4 °C compared to the suburbs. The small increase in surface temperature at city level is mainly attributed to cumulative impact of human activities, changes in LULC pattern and vegetation density. In this study the methodology takes into account spatially-relative surface temperatures and impervious surface fraction value to measure surface UHI intensity between the urban land cover and rural surroundings. Both the spatial and temporal variation in surface temperature associated with impervious surface area (ISA) has been evaluated to assess the effect of urbanization on the local climate.     

Assimilation of endmember variability in spectral mixture analysis for urban land cover extraction

Variable Endmember Constrained Least Square (VECLS) technique is proposed to account endmember variability in the linear mixture model by incorporating the variance for each class, the signals of which varies from pixel to pixel due to change in urban land cover (LC) structures. VECLS is first tested with a computer simulated three class endmember considering four bands having small, medium and large variability with three different spatial resolutions. The technique is next validated with real datasets of IKONOS, Landsat ETM+ and MODIS. The results show that correlation between actual and estimated proportion is higher by an average of 0.25 for the artificial datasets compared to a situation where variability is not considered. With IKONOS, Landsat ETM+ and MODIS data, the average correlation increased by 0.15 for 2 and 3 classes and by 0.19 for 4 classes, when compared to single endmember per class.     

Simultaneous observations of some unusual whistlers and VLF hiss emission at a low L-value (L = 1.17)

The purpose of this paper is to describe some unusual whistlers (doublets and triplets) and VLF hiss emission recorded simultaneously on February 18, 1998 during nighttime at a low latitude Indian ground station Jammu (geomag. lat., 22° 26′ N; L = 1.17), and to make some discussions about their origin. The detailed structures of the observed VLF hiss emission clearly show that these emissions confined to a narrow continuous frequency band. Some times the frequency of hiss band oscillates and subsequently touches the upper edge of the first whistler component of the doublet. Detailed structures of the dynamic spectra of whistler and VLF hiss emission are briefly presented. From the dispersion analysis of the whistler doublets and triplets, it is found that the individual whistlers of the doublets and triplets simultaneously observed on the same day are one-hop whistlers having propagation path along higher and closely spaced L-values. Our result also shows that VLF hiss has been generated in the equatorial region of higher L-values. Generation and propagation mechanisms are briefly discussed.