Programmable, multi-purpose opto-electronic sensor system

Optical fibre sensing is becoming increasingly attractive in both the smart structure sphere of interest as well as the medical and industrial concerns. Fibre-optic interferometric sensors can be designed as compact and robust transducers. In general, the transduction mechanism involves the phase modulation of coherent or monochromatic light propagating through a fibre-optic cable, and detecting the changes in the energy associated with this phase change. Sensors based on this technique can generally be configured to be quite sensitive and measurements of a wide variety of physical parameters are achievable. Intrinsic features of optical fibres, such as immunity to electromagnetic interference, flexibility, thinness, strength and weight, make this ideal for sensor technology. In the process of developing fibre-optic sensors for laboratory experimentation, as well as generalised research, an appropriate, easy to use opto-electronic drive and measurement system is required. This paper discusses the operation of a programmable opto-electronic drive and measurement system     

Geomagnetic Observations for Main Field Studies: From Ground to Space

Direct measurements of the geomagnetic field have been made for more than 400 years, beginning with individual determinations of the angle between geographic and magnetic North. This was followed by the start of continuous time series of full vector measurements at geomagnetic observatories and the beginning of geomagnetic repeat stations surveys in the 19th century. In the second half of the 20th century, true global coverage with geomagnetic field measurements was accomplished by magnetometer payloads on low-Earth-orbiting satellites. This article describes the procedures and instruments for magnetic field measurements on ground and in space and covers geomagnetic observatories, repeat stations, automatic observatories, satellites and historic observations. Special emphasis is laid on the global network of geomagnetic observatories.     

The spectral and temporal variability of the X-ray transient 4U1630-47

We present the results of four observations made by the European Space Agency's EXOSAT Observatory of the X-ray transient 4U1630-47 during its 1984 outburst. We observed marked spectral changes as the source decayed from a maximum observed intensity of 8×10^–9 erg/cm²/sec (1.5–10 keV). The spectrum could be modelled by a soft thermal-like component with a high energy power-law tail. The relative contribution of the soft to hard component decreased as the total luminosity decreased. We compare these changes with those observed from the black hole candidate Cyg X-1 when it transitions from a high to a low state. In addition we report the discovery of short timescale intensity variations (down to 50 msec) with a characteristic timescale of 20 sec. We present a precise position for this unidentified source.on leave from Università di Roma Dipartimento di Fisica G. Marconi.     

Aperture error mitigation via local-state estimation for frequency-based emitter location

This paper considers the problem of locating a stationary coherent emitter via a single moving platform making frequency measurements in the presence of aperture state uncertainty. It is shown that the estimated emitter location is most sensitive to the receiving aperture velocity uncertainty. The required aperture velocity accuracy is determined through a noninfinitesimal perturbation analysis. A solution to location accuracy enhancement with a minimal hardware addition is attempted. It is shown that this can be achieved by mounting a high-resolution tri-axis microelectromechanical systems (MEMS) accelerometer at the aperture to measure its velocity, which can deviate significantly from that estimated by the on-board navigation system. The Doppler shifts of the GPS signal carrier frequency, whenever it can be acquired through the aperture, are also considered as a way to aid the aperture velocity measurement. A decentralized, federated processing method for the aperture velocity estimate referenced at the aperture, integrating all measurement data, is presented. An upper bound for the error of aperture velocity estimate is derived. The potential for significant accuracy enhancement for emitter location is demonstrated.     

A Simple Real-Time Incoherent Optical Correlator

The Theory and experimental results of a simple optical correlator are given. The optical components consist only of an incoherent source, condensing, collimating, and transforming lenses, and a photodetector. For real-time operation, a reference signal on a photographic transparency is correlated with an unknown signal on an ultrasonic light modulator. The output is a function of time proportional to the correlation function's amplitude rather than the squared amplitude generated by other optical correlators. When used for correlation in radar signal processing, the optical processor may be used for both pulse coding and decoding (pulse expansion and compression) and the decoded signal is shown to be described by Woodward's ambiguity function. The experimental results demonstrated the validity of the theory in both real and scaled time. However, developmental work is still required to improve the operation.     

CAS Message Format

The collision avoidance system (CAS) defined by the ATA provides for the exchange of range, range-rate, and altitude data, as well as the less significant items of altitude rate and north-south and east-west velocity vector data. This paper discusses the CAS message format and presents data (based on McDonnell-Douglas in-flight experience with its EROS system) on the accuracy of gathering the CAS data.     

Kalman Filter Applications in Airborne Radar Tracking

This paper studies the application of Kalman filtering to single-target track systems in airborne radar. An angle channel Kalman filter is configured which incorporates measures of range, range rate, and on-board dynamics. Theoretical performance results are given and a discussion of methods for reducing the complexity of the Kalman gain computation is presented. A suboptimal antenna controller which operates on the outputs of the angle Kalman filter is also described. In addition, methodological improvements are shown to exist in the design of range and range-rate trackers using the Kalman filter configuration.