一种精确计算航天器本体对太阳电池阵遮挡的方法

针对航天器太阳电池阵电设计和热设计中需要准确考虑阴影影响的问题,提出了一种可以精确计算太阳电池阵阴影的方法。首先使用三角网格来建立3D模型,其次考虑了航天器本体构件间的相对运动,然后用一个“包围盒”去截取模型上的三角网格点,再把这些点投射到太阳电池阵上,最后把太阳电池阵分成小方格,分别使用逐点比较法和最小矩形法来生成阴影图形。给出了月球车遮挡计算的实例,仿真分析表明生成阴影图形时,最小矩形法具有更高的速度。使用本文所述的方法,可计算结构复杂、构件间有相对运动的航天器本体对太阳电池阵造成的遮挡,能生成精确的阴影图形,为后续计算受遮挡的太阳电池阵的输出特性奠定了基础。     

O2 evolution and cyclic electron flow around photosystem I in long-term ground batch culture of Euglena gracilis

Based on the purpose of better exploring the function of green producers in the closed aquatic biological life support system, the condition of dynamic O₂ evolution and performance of cyclic electron flow around photosystem I (CEF-PSI) in long-term ground batch culture of Euglena gracilis were studied, the relationship between linear electron flow (LEF) and CEF-PSI was revealed, the function of CEF-PSI was investigated. Excellent consistency in O₂ evolution pattern was observed in cultures grown in both closed and open containers, O₂ evolution was strictly suppressed in phase 1, but the rate of it increased significantly in phase 2. CEF-PSI was proposed to be active during the whole course of cultivation, even in the declining phase 3, it still operated at the extent of 47–55%. It is suggested that the relationship between LEF and CEF-PSI is not only competition but also reciprocity. CEF-PSI was proposed to contribute to the considerable growth in phase 1; it was also suggested to play an important protective role against photosystem II (PSII) photoinhibition at the greatly enhanced level (approximately 80–95%) on the 2nd day. Our results in this research suggest that E. gracilis had very particular photosynthetic characteristics, the strict O₂ evolution suppression in the initial culture phase might be a special light acclimation behavior, and CEF-PSI could be an important mechanism involved in this kind of adaptation to the changeable light environment.     

非对称转捩对横向偏离稳定的影响

为研究非对称转捩对横向偏离稳定的影响,采用指定位置的强制转捩方法,对典型升力体外形进行非对称转捩的的数值模拟,包含全层流、全湍流及斜线转捩情况的计算与分析,得到非对称转捩对横向偏离稳定性影响的结论。结果表明：极端转捩会使飞行器航向稳定性变差,斜线转捩甚至会使飞行器航向稳定性的极性发生改变。     

同轴喷嘴自发激励高频燃烧不稳定性试验研究

为增进对液氧煤油火箭发动机同轴离心喷嘴燃烧不稳定性过程的理解,在大气环境下进行了同轴离心喷嘴的自发激励燃烧不稳定性试验。试验采用单喷嘴敞口模拟燃烧室,高温的氧气和空气混合物从同轴喷嘴的直流喷嘴喷注,高温的煤油蒸气从同轴喷嘴的离心喷嘴喷注。通过逐步改变氧化剂流量使模拟燃烧室内产生自发激励高频燃烧不稳定性,使用脉动压力传感器和黑白高速相机记录稳定和不稳定燃烧工况下的脉动压力和火焰。研究发现：气气同轴离心喷嘴的自发激励高频燃烧不稳定过程呈现“滞后”现象;不稳定工况下的火焰均为脱口火焰,火焰特征长度约等于喷嘴出口到脱口火焰团上沿的距离;气气同轴离心喷嘴燃烧不稳定性的发生原因可以被认为是因混合特征时间与声学特征时间相关。     

基于形态学的多级滤波背景抑制算法

传统的形态学单一结构元素,对云杂波背景滤波常留下强云层边缘及类似于目标的噪声,增加了后续处理的复杂程度.针对这一问题,提出了一种多级滤波思想.采用不同方向的线性结构元素进行形态学滤波,通过滤波尽可能准确地保留图像背景,然后与原图差分,将得到的图像再用矩形结构元素进行形态学开运算.仿真结果表明,该算法对云杂波背景抑制效果好,提高了图像的信噪比.     

二维分布载荷顺序效应与排列顺序效应

首先建立了二维载荷谱分布,然后依据载荷顺序效应损伤机制编制了3种疲劳谱。通过二维分布谱的载荷顺序效应与排列顺序效应分析得出,谱载荷顺序效应仅与载荷总均值有关,并随其增大有可能对寿命预测影响较大。但编谱方式对零件寿命影响不大。     

药用生物材料的空间电泳分离

文章综述了空间材料加工领域的重要组成部分——生物材料空间电泳分离研究的情况。重点介绍空间电泳分离的目的、内容、它的过去、现在和将来。     

基于弧长参数的开边自由曲面构件上纤维均匀覆盖(英文)

This article uses arc-length parameters for path planning to carry out robotic fibre placement （RFP） over open-contoured structures This allows representing the initial path and offset points using an identical mathematical equation and computation by more simple arithmetic. With the help of classical differential geometry, the calculation of fiber-placing paths may be reduced to solution of initial-value problems of first-order ordinary differential equations in the parametric domain （parametrically defined mould surface） or in 3D space （an implicitly defined mould surface）, thereby significantly improving on the existing methods. Compared with the conventional methods, the proposed method, besides its computational simplicity, has a better error control mechanism in computing the initial path and offset points. Numerical experiments are also carried out to demonstrate the feasibility of the new method in composite forming processes and also its potential application in computer numerical control （CNC） machining, surface trim, and other industrial practices.     

空间环境对超低轨道卫星轨迹规划的影响

针对超低轨道卫星受空间环境影响显著,对特定目标的轨迹规划难度大的问题,分析了经验大气模型中空间环境参数预报的预报误差以及空间环境参数预报对轨迹规划的影响.在目前空间环境参数预报的误差特性的基础上,建立了轨道控制量和空间环境参数双变量的轨迹评估规划的算法,通过轨迹规划评估后选取最优轨迹规划方案.该算法能够很好地适应空间环境参数的变化,降低空间环境参数预报误差带来的轨道控制风险.目前,该算法已在某超低轨道卫星的轨迹规划中得到成功应用,对需要考虑空间环境因素影响的较低轨道卫星的轨迹规划与控制具有一定的借鉴意义.     

复合材料纤维自动铺放过程碰撞干涉检测

基于七自由度复合材料纤维铺放机器人,对铺放过程中可能出现的碰撞干涉情况进行分析,建立了铺放机器人三维数字化模型,研究了基于实体布尔运算的碰撞干涉检测算法。基于CATIA CAA平台开发了碰撞干涉检测模块,集成于复合材料纤维自动铺放编程软件中,对某型飞机进气道的铺放过程进行了仿真,结果证明本文提出的算法可有效地检测碰撞与干涉。