角速度可控的五坐标NURBS插补方法实现(英文)

在复杂形体零部件的高速高精数控加工方面,五坐标数控机床起着非常重要的作用。为了适应高速加工的需要,提出了一种用于机床五坐标加工的非均匀有理B样条(NURBS)插补指令。采用该插补指令进行数控加工时,为了获取实时加工过程中的刀位矢量,开放式控制器以相邻刀位矢量间的夹角为参数构造方位B样条曲线。构造映射插补过程中位置曲线弧长和方位矢量角度的多项式曲线,利用该曲线实现线性轴速度及旋转轴速度的同步控制。详细介绍了该插补指令的算法流程及其在开放式控制器中的实现过程。最后,通过加工实例验证了该插补指令的性能。     

Effects of Machine Tool Configuration on Its Dynamics Based on Orthogonal Experiment Method

In order to analyze the influence of configuration parameters on dynamic characteristics of machine tools in the working space, the configuration parameters have been suggested based on the orthogonal experiment method. Dynamic analysis of a milling machine, which is newly designed for producing turbine blades, has been conducted by utilizing the modal synthesis method. The finite element model is verified and updated by experimental modal analysis (EMA) of the machine tool. The result gained by modal synthesis method is compared with whole-model finite element method (FEM) result as well. According to the orthogonal experiment method, four configuration parameters of machine tool are considered as four factors for dynamic characteristics. The influence of configuration parameters on the first three natural frequencies is obtained by range analysis. It is pointed out that configuration parameter is the most important factor affecting the fundamental frequency of machine tools, and configuration parameter has less effect on lower-order modes of the system than others. The combination of configuration parameters which makes the fundamental frequency reach the maximum value is provided. Through demonstration, the conclusion can be drawn that the influence of configuration parameters on the natural frequencies of machine tools can be analyzed explicitly by the orthogonal experiment method, which offers a new method for estimating the dynamic characteristics of machine tools.     

Study on Compressive Properties of Z-pinned Laminates in RTD and Hygrothermal Environment

Compressive tests of [0] 12 and [90] 12 unidirectional laminates and [45/0/-45/90] 2S quasi-isotropic laminates are accomplished in both room-temperature and dry (RTD) and hygrothermal environment. And simulation studies on the compressive strength of Z-pinned laminates of [0] 12 and [45/0/-45/90] 2S are conducted by using finite element analysis (FEA). A microstructural unit cell for FEA is created to simulate a representative laminates unit with one pin. Within the unit cell, the first directions of the elements’ material coordinate systems are changed to simulate the fibres’ deflecting around the pin. The hygrothermal effect is simulated by the material properties’ adjustments which are determined by the compressive tests of non-pined laminates. The experimental results indicate that the percentage of reduction in the compressive modulus of Z-pinned laminates caused by Z-pin becomes smaller with the percentage of 0° fibres decreasing in the laminates; the compressive strength of quasi-isotropic laminates reduces and the percentage of the reduction in the compressive strength declines with Z-pin volume content increasing, and the moisture absorption ratio of the Z-pinned specimens is greater than that of the non-pinned specimens, because the cracks around Z-pin increase the moisture absorption. In addition, the simulations show that the deflection of fibres around Z-pin is the main factor for the reduction in the compressive strength of Z-pinned unidirectional laminates, the dilution of fibre volume content caused by resin-rich pocket is the principal factor for the decline in the compressive strength of Z-pinned quasi-istropic laminates, and the compressive strength of Z-pinned specimens in hygrothermal environment reduces as the result of superimposition of some factors, including the changes in material properties caused by hygrothermal environment, the deflection of fibres and the resin-rich pocket caused by Z-pin.     

Corrosion Properties of Light-weight and High-strength 2195 Al-Li Alloy

The intergranular corrosion and exfoliation corrosion of 2195 Al-Li alloy treated by multi-step heating-rate controlled aging (MSRC) are studied. The corrosion features of 2195 Al-Li alloys which are respectively treated by high-temperature nucleation MSRC (H-M) and low-temperature nucleation MSRC (L-M) are contrasted. And the corrosion mechanism of 2195 Al-Li alloy is also discussed from the viewpoint of microstructure (types, distribution, etc.) of the strengthening phase. The results show that 2195 Al-Li alloy after H-M is more susceptible to intergranular corrosion and exfoliation corrosion than that of alloy after L-M. The degree of intergranular corrosion increases with the increase of predeformation amount and the surface parallel to the rolling direction is more prone to exfoliation corrosion. The main reason of intergranular corrosion and exfoliation corrosion is the for-mation of corrosion galvanic couples among T1 phase, ?θ’ phase and grain boundary precipitate-free zones (PFZ).     

Why does the total pressure on the subsolar magnetopause differ from the solar wind dynamic pressure?

Based on analysis of MHD equations and the results of numerical simulation in the magneto-sheath it is demonstrated that the total pressure on the magnetopause differs from the solar wind dynamic pressure in the majority of cases. From the equation of motion it follows that the total pressure is reduced due to deflection from the Sun-Earth line. At the same time, it increases because of formation of a magnetic barrier. This result is consistent with experimentally observed expansion of the magnetosphere for the radial direction of the interplanetary magnetic field, when no magnetic barrier is formed. In this paper we compare the behavior of pressure along the Sun-Earth line for the northward and radial interplanetary field, using the results of numerical MHD simulation and observational data from THEMIS. In the isotropic MHD approximation, the difference between the total pressure on the subsolar magnetopause at northern and radial IMFs does not exceed 10–12 percent. However, in the anisotropic approximation this difference increases up to 15–20 percent. The results of anisotropic modeling well agree with observed averaged profiles of pressure components in the subsolar magnetosheath.     

Impact of Distance Determinations on Galactic Structure. II. Old Tracers

Here we review the efforts of a number of recent results that use old tracers to understand the build up of the Galaxy. Details that lead directly to using these old tracers to measure distances are discussed. We concentrate on the following: (1) the structure and evolution of the Galactic bulge and inner Galaxy constrained from the dynamics of individual stars residing therein; (2) the spatial structure of the old Galactic bulge through photometric observations of RR Lyrae-type stars; (3) the three-dimensional structure, stellar density, mass, chemical composition, and age of the Milky Way bulge as traced by its old stellar populations; (4) an overview of RR Lyrae stars known in the ultra-faint dwarfs and their relation to the Galactic halo; and (5) different approaches for estimating absolute and relative cluster ages.     

A microbial oasis in the hypersaline Atacama subsurface discovered by a life detector chip: implications for the search for life on Mars

The Atacama Desert has long been considered a good Mars analogue for testing instrumentation for planetary exploration, but very few data (if any) have been reported about the geomicrobiology of its salt-rich subsurface. We performed a Mars analogue drilling campaign next to the Salar Grande (Atacama, Chile) in July 2009, and several cores and powder samples from up to 5?m deep were analyzed in situ with LDChip300 (a Life Detector Chip containing 300 antibodies). Here, we show the discovery of a hypersaline subsurface microbial habitat associated with halite-, nitrate-, and perchlorate-containing salts at 2?m deep. LDChip300 detected bacteria, archaea, and other biological material (DNA, exopolysaccharides, some peptides) from the analysis of less than 0.5?g of ground core sample. The results were supported by oligonucleotide microarray hybridization in the field and finally confirmed by molecular phylogenetic analysis and direct visualization of microbial cells bound to halite crystals in the laboratory. Geochemical analyses revealed a habitat with abundant hygroscopic salts like halite (up to 260?g kg(-1)) and perchlorate (41.13?μg g(-1) maximum), which allow deliquescence events at low relative humidity. Thin liquid water films would permit microbes to proliferate by using detected organic acids like acetate (19.14?μg g(-1)) or formate (76.06?μg g(-1)) as electron donors, and sulfate (15875?μg g(-1)), nitrate (13490?μg g(-1)), or perchlorate as acceptors. Our results correlate with the discovery of similar hygroscopic salts and possible deliquescence processes on Mars, and open new search strategies for subsurface martian biota. The performance demonstrated by our LDChip300 validates this technology for planetary exploration, particularly for the search for life on Mars.     

Improved Wavelet-based Spatial Filter of Damage Imaging Method on Composite Structures

Piezoelectric sensor array-based spatial filter technology is a new promising method presented in research area of structural health monitoring (SHM) in the recent years. To apply this method to composite structures and give the actual position of dam-age, this paper proposes a spatial filter-based damage imaging method improved by complex Shannon wavelet transform. The basic principle of spatial filter is analyzed first. Then, this paper proposes a method of using complex Shannon wavelet transform to construct analytic signals of time domain signals of PZT sensors array. The analytic signals are synthesized depending on the principle of the spatial filter to give a damage imaging in the form of angle-time. A method of converting the damage imaging to the form of angle-distance is discussed. Finally, an aircraft composite oil tank is adopted to validate the damage imaging method. The validating results show that this method can recognize angle and distance of damage successfully.